community.crypto.acme_certificate module – Create SSL/TLS certificates with the ACME protocol

Note

This module is part of the community.crypto collection (version 2.3.4).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.crypto.

To use it in a playbook, specify: community.crypto.acme_certificate.

Synopsis

  • Create and renew SSL/TLS certificates with a CA supporting the ACME protocol, such as Let’s Encrypt or Buypass. The current implementation supports the http-01, dns-01 and tls-alpn-01 challenges.

  • To use this module, it has to be executed twice. Either as two different tasks in the same run or during two runs. Note that the output of the first run needs to be recorded and passed to the second run as the module argument data.

  • Between these two tasks you have to fulfill the required steps for the chosen challenge by whatever means necessary. For http-01 that means creating the necessary challenge file on the destination webserver. For dns-01 the necessary dns record has to be created. For tls-alpn-01 the necessary certificate has to be created and served. It is not the responsibility of this module to perform these steps.

  • For details on how to fulfill these challenges, you might have to read through the main ACME specification and the TLS-ALPN-01 specification. Also, consider the examples provided for this module.

  • The module includes experimental support for IP identifiers according to the RFC 8738.

Requirements

The below requirements are needed on the host that executes this module.

Parameters

Parameter

Comments

account_email

string

The email address associated with this account.

It will be used for certificate expiration warnings.

Note that when modify_account is not set to no and you also used the community.crypto.acme_account module to specify more than one contact for your account, this module will update your account and restrict it to the (at most one) contact email address specified here.

account_key_content

string

Content of the ACME account RSA or Elliptic Curve key.

Mutually exclusive with account_key_src.

Required if account_key_src is not used.

Warning: the content will be written into a temporary file, which will be deleted by Ansible when the module completes. Since this is an important private key — it can be used to change the account key, or to revoke your certificates without knowing their private keys —, this might not be acceptable.

In case cryptography is used, the content is not written into a temporary file. It can still happen that it is written to disk by Ansible in the process of moving the module with its argument to the node where it is executed.

account_key_passphrase

string

added in 1.6.0 of community.crypto

Phassphrase to use to decode the account key.

Note: this is not supported by the openssl backend, only by the cryptography backend.

account_key_src

aliases: account_key

path

Path to a file containing the ACME account RSA or Elliptic Curve key.

Private keys can be created with the community.crypto.openssl_privatekey or community.crypto.openssl_privatekey_pipe modules. If the requisite (cryptography) is not available, keys can also be created directly with the openssl command line tool: RSA keys can be created with openssl genrsa .... Elliptic curve keys can be created with openssl ecparam -genkey .... Any other tool creating private keys in PEM format can be used as well.

Mutually exclusive with account_key_content.

Required if account_key_content is not used.

account_uri

string

If specified, assumes that the account URI is as given. If the account key does not match this account, or an account with this URI does not exist, the module fails.

acme_directory

string / required

The ACME directory to use. This is the entry point URL to access the ACME CA server API.

For safety reasons the default is set to the Let’s Encrypt staging server (for the ACME v1 protocol). This will create technically correct, but untrusted certificates.

For Let’s Encrypt, all staging endpoints can be found here: https://letsencrypt.org/docs/staging-environment/. For Buypass, all endpoints can be found here: https://community.buypass.com/t/63d4ay/buypass-go-ssl-endpoints

For Let’s Encrypt, the production directory URL for ACME v2 is https://acme-v02.api.letsencrypt.org/directory.

For Buypass, the production directory URL for ACME v2 and v1 is https://api.buypass.com/acme/directory.

For ZeroSSL, the production directory URL for ACME v2 is https://acme.zerossl.com/v2/DV90.

The notes for this module contain a list of ACME services this module has been tested against.

acme_version

integer / required

The ACME version of the endpoint.

Must be 1 for the classic Let’s Encrypt and Buypass ACME endpoints, or 2 for standardized ACME v2 endpoints.

The value 1 is deprecated since community.crypto 2.0.0 and will be removed from community.crypto 3.0.0.

Choices:

  • 1

  • 2

agreement

string

URI to a terms of service document you agree to when using the ACME v1 service at acme_directory.

Default is latest gathered from acme_directory URL.

This option will only be used when acme_version is 1.

chain_dest

aliases: chain

path

If specified, the intermediate certificate will be written to this file.

challenge

string

The challenge to be performed.

Choices:

  • http-01 ← (default)

  • dns-01

  • tls-alpn-01

csr

aliases: src

path

File containing the CSR for the new certificate.

Can be created with community.crypto.openssl_csr or openssl req ....

The CSR may contain multiple Subject Alternate Names, but each one will lead to an individual challenge that must be fulfilled for the CSR to be signed.

Note: the private key used to create the CSR must not be the account key. This is a bad idea from a security point of view, and the CA should not accept the CSR. The ACME server should return an error in this case.

Precisely one of csr or csr_content must be specified.

csr_content

string

added in 1.2.0 of community.crypto

Content of the CSR for the new certificate.

Can be created with community.crypto.openssl_csr_pipe or openssl req ....

The CSR may contain multiple Subject Alternate Names, but each one will lead to an individual challenge that must be fulfilled for the CSR to be signed.

Note: the private key used to create the CSR must not be the account key. This is a bad idea from a security point of view, and the CA should not accept the CSR. The ACME server should return an error in this case.

Precisely one of csr or csr_content must be specified.

data

dictionary

The data to validate ongoing challenges. This must be specified for the second run of the module only.

The value that must be used here will be provided by a previous use of this module. See the examples for more details.

Note that for ACME v2, only the order_uri entry of data will be used. For ACME v1, data must be non-empty to indicate the second stage is active; all needed data will be taken from the CSR.

Note: the data option was marked as no_log up to Ansible 2.5. From Ansible 2.6 on, it is no longer marked this way as it causes error messages to be come unusable, and data does not contain any information which can be used without having access to the account key or which are not public anyway.

deactivate_authzs

boolean

Deactivate authentication objects (authz) after issuing a certificate, or when issuing the certificate failed.

Authentication objects are bound to an account key and remain valid for a certain amount of time, and can be used to issue certificates without having to re-authenticate the domain. This can be a security concern.

Choices:

  • no ← (default)

  • yes

dest

aliases: cert

path

The destination file for the certificate.

Required if fullchain_dest is not specified.

force

boolean

Enforces the execution of the challenge and validation, even if an existing certificate is still valid for more than remaining_days.

This is especially helpful when having an updated CSR, for example with additional domains for which a new certificate is desired.

Choices:

  • no ← (default)

  • yes

fullchain_dest

aliases: fullchain

path

The destination file for the full chain (that is, a certificate followed by chain of intermediate certificates).

Required if dest is not specified.

modify_account

boolean

Boolean indicating whether the module should create the account if necessary, and update its contact data.

Set to no if you want to use the community.crypto.acme_account module to manage your account instead, and to avoid accidental creation of a new account using an old key if you changed the account key with community.crypto.acme_account.

If set to no, terms_agreed and account_email are ignored.

Choices:

  • no

  • yes ← (default)

remaining_days

integer

The number of days the certificate must have left being valid. If cert_days < remaining_days, then it will be renewed. If the certificate is not renewed, module return values will not include challenge_data.

To make sure that the certificate is renewed in any case, you can use the force option.

Default: 10

request_timeout

integer

added in 2.3.0 of community.crypto

The time Ansible should wait for a response from the ACME API.

This timeout is applied to all HTTP(S) requests (HEAD, GET, POST).

Default: 10

retrieve_all_alternates

boolean

When set to yes, will retrieve all alternate trust chains offered by the ACME CA. These will not be written to disk, but will be returned together with the main chain as all_chains. See the documentation for the all_chains return value for details.

Choices:

  • no ← (default)

  • yes

select_chain

list / elements=dictionary

added in 1.0.0 of community.crypto

Allows to specify criteria by which an (alternate) trust chain can be selected.

The list of criteria will be processed one by one until a chain is found matching a criterium. If such a chain is found, it will be used by the module instead of the default chain.

If a criterium matches multiple chains, the first one matching will be returned. The order is determined by the ordering of the Link headers returned by the ACME server and might not be deterministic.

Every criterium can consist of multiple different conditions, like issuer and subject. For the criterium to match a chain, all conditions must apply to the same certificate in the chain.

This option can only be used with the cryptography backend.

authority_key_identifier

string

Checks for the AuthorityKeyIdentifier extension. This is an identifier based on the private key of the issuer of the intermediate certificate.

The identifier must be of the form C4:A7:B1:A4:7B:2C:71:FA:DB:E1:4B:90:75:FF:C4:15:60:85:89:10.

issuer

dictionary

Allows to specify parts of the issuer of a certificate in the chain must have to be selected.

If issuer is empty, any certificate will match.

An example value would be {"commonName": "My Preferred CA Root"}.

subject

dictionary

Allows to specify parts of the subject of a certificate in the chain must have to be selected.

If subject is empty, any certificate will match.

An example value would be {"CN": "My Preferred CA Intermediate"}

subject_key_identifier

string

Checks for the SubjectKeyIdentifier extension. This is an identifier based on the private key of the intermediate certificate.

The identifier must be of the form A8:4A:6A:63:04:7D:DD:BA:E6:D1:39:B7:A6:45:65:EF:F3:A8:EC:A1.

test_certificates

string

Determines which certificates in the chain will be tested.

all tests all certificates in the chain (excluding the leaf, which is identical in all chains).

first only tests the first certificate in the chain, that is the one which signed the leaf.

last only tests the last certificate in the chain, that is the one furthest away from the leaf. Its issuer is the root certificate of this chain.

Choices:

  • first

  • last

  • all ← (default)

select_crypto_backend

string

Determines which crypto backend to use.

The default choice is auto, which tries to use cryptography if available, and falls back to openssl.

If set to openssl, will try to use the openssl binary.

If set to cryptography, will try to use the cryptography library.

Choices:

  • auto ← (default)

  • cryptography

  • openssl

terms_agreed

boolean

Boolean indicating whether you agree to the terms of service document.

ACME servers can require this to be true.

This option will only be used when acme_version is not 1.

Choices:

  • no ← (default)

  • yes

validate_certs

boolean

Whether calls to the ACME directory will validate TLS certificates.

Warning: Should only ever be set to no for testing purposes, for example when testing against a local Pebble server.

Choices:

  • no

  • yes ← (default)

Notes

Note

  • At least one of dest and fullchain_dest must be specified.

  • This module includes basic account management functionality. If you want to have more control over your ACME account, use the community.crypto.acme_account module and disable account management for this module using the modify_account option.

  • This module was called letsencrypt before Ansible 2.6. The usage did not change.

  • If a new enough version of the cryptography library is available (see Requirements for details), it will be used instead of the openssl binary. This can be explicitly disabled or enabled with the select_crypto_backend option. Note that using the openssl binary will be slower and less secure, as private key contents always have to be stored on disk (see account_key_content).

  • Although the defaults are chosen so that the module can be used with the Let’s Encrypt CA, the module can in principle be used with any CA providing an ACME endpoint, such as Buypass Go SSL.

  • So far, the ACME modules have only been tested by the developers against Let’s Encrypt (staging and production), Buypass (staging and production), ZeroSSL (production), and Pebble testing server. We have got community feedback that they also work with Sectigo ACME Service for InCommon. If you experience problems with another ACME server, please create an issue to help us supporting it. Feedback that an ACME server not mentioned does work is also appreciated.

See Also

See also

The Let’s Encrypt documentation

Documentation for the Let’s Encrypt Certification Authority. Provides useful information for example on rate limits.

Buypass Go SSL

Documentation for the Buypass Certification Authority. Provides useful information for example on rate limits.

Automatic Certificate Management Environment (ACME)

The specification of the ACME protocol (RFC 8555).

ACME TLS ALPN Challenge Extension

The specification of the tls-alpn-01 challenge (RFC 8737).

community.crypto.acme_challenge_cert_helper

Helps preparing tls-alpn-01 challenges.

community.crypto.openssl_privatekey

Can be used to create private keys (both for certificates and accounts).

community.crypto.openssl_privatekey_pipe

Can be used to create private keys without writing it to disk (both for certificates and accounts).

community.crypto.openssl_csr

Can be used to create a Certificate Signing Request (CSR).

community.crypto.openssl_csr_pipe

Can be used to create a Certificate Signing Request (CSR) without writing it to disk.

community.crypto.certificate_complete_chain

Allows to find the root certificate for the returned fullchain.

community.crypto.acme_certificate_revoke

Allows to revoke certificates.

community.crypto.acme_account

Allows to create, modify or delete an ACME account.

community.crypto.acme_inspect

Allows to debug problems.

Examples

### Example with HTTP challenge ###

- name: Create a challenge for sample.com using a account key from a variable.
  community.crypto.acme_certificate:
    account_key_content: "{{ account_private_key }}"
    csr: /etc/pki/cert/csr/sample.com.csr
    dest: /etc/httpd/ssl/sample.com.crt
  register: sample_com_challenge

# Alternative first step:
- name: Create a challenge for sample.com using a account key from hashi vault.
  community.crypto.acme_certificate:
    account_key_content: "{{ lookup('hashi_vault', 'secret=secret/account_private_key:value') }}"
    csr: /etc/pki/cert/csr/sample.com.csr
    fullchain_dest: /etc/httpd/ssl/sample.com-fullchain.crt
  register: sample_com_challenge

# Alternative first step:
- name: Create a challenge for sample.com using a account key file.
  community.crypto.acme_certificate:
    account_key_src: /etc/pki/cert/private/account.key
    csr_content: "{{ lookup('file', '/etc/pki/cert/csr/sample.com.csr') }}"
    dest: /etc/httpd/ssl/sample.com.crt
    fullchain_dest: /etc/httpd/ssl/sample.com-fullchain.crt
  register: sample_com_challenge

# perform the necessary steps to fulfill the challenge
# for example:
#
# - copy:
#     dest: /var/www/html/{{ sample_com_challenge['challenge_data']['sample.com']['http-01']['resource'] }}
#     content: "{{ sample_com_challenge['challenge_data']['sample.com']['http-01']['resource_value'] }}"
#   when: sample_com_challenge is changed and 'sample.com' in sample_com_challenge['challenge_data']
#
# Alternative way:
#
# - copy:
#     dest: /var/www/{{ item.key }}/{{ item.value['http-01']['resource'] }}
#     content: "{{ item.value['http-01']['resource_value'] }}"
#   loop: "{{ sample_com_challenge.challenge_data | dict2items }}"
#   when: sample_com_challenge is changed

- name: Let the challenge be validated and retrieve the cert and intermediate certificate
  community.crypto.acme_certificate:
    account_key_src: /etc/pki/cert/private/account.key
    csr: /etc/pki/cert/csr/sample.com.csr
    dest: /etc/httpd/ssl/sample.com.crt
    fullchain_dest: /etc/httpd/ssl/sample.com-fullchain.crt
    chain_dest: /etc/httpd/ssl/sample.com-intermediate.crt
    data: "{{ sample_com_challenge }}"

### Example with DNS challenge against production ACME server ###

- name: Create a challenge for sample.com using a account key file.
  community.crypto.acme_certificate:
    account_key_src: /etc/pki/cert/private/account.key
    account_email: [email protected]
    src: /etc/pki/cert/csr/sample.com.csr
    cert: /etc/httpd/ssl/sample.com.crt
    challenge: dns-01
    acme_directory: https://acme-v01.api.letsencrypt.org/directory
    # Renew if the certificate is at least 30 days old
    remaining_days: 60
  register: sample_com_challenge

# perform the necessary steps to fulfill the challenge
# for example:
#
# - community.aws.route53:
#     zone: sample.com
#     record: "{{ sample_com_challenge.challenge_data['sample.com']['dns-01'].record }}"
#     type: TXT
#     ttl: 60
#     state: present
#     wait: yes
#     # Note: route53 requires TXT entries to be enclosed in quotes
#     value: "{{ sample_com_challenge.challenge_data['sample.com']['dns-01'].resource_value | regex_replace('^(.*)$', '\"\\1\"') }}"
#   when: sample_com_challenge is changed and 'sample.com' in sample_com_challenge.challenge_data
#
# Alternative way:
#
# - community.aws.route53:
#     zone: sample.com
#     record: "{{ item.key }}"
#     type: TXT
#     ttl: 60
#     state: present
#     wait: yes
#     # Note: item.value is a list of TXT entries, and route53
#     # requires every entry to be enclosed in quotes
#     value: "{{ item.value | map('regex_replace', '^(.*)$', '\"\\1\"' ) | list }}"
#   loop: "{{ sample_com_challenge.challenge_data_dns | dict2items }}"
#   when: sample_com_challenge is changed

- name: Let the challenge be validated and retrieve the cert and intermediate certificate
  community.crypto.acme_certificate:
    account_key_src: /etc/pki/cert/private/account.key
    account_email: [email protected]
    src: /etc/pki/cert/csr/sample.com.csr
    cert: /etc/httpd/ssl/sample.com.crt
    fullchain: /etc/httpd/ssl/sample.com-fullchain.crt
    chain: /etc/httpd/ssl/sample.com-intermediate.crt
    challenge: dns-01
    acme_directory: https://acme-v01.api.letsencrypt.org/directory
    remaining_days: 60
    data: "{{ sample_com_challenge }}"
  when: sample_com_challenge is changed

# Alternative second step:
- name: Let the challenge be validated and retrieve the cert and intermediate certificate
  community.crypto.acme_certificate:
    account_key_src: /etc/pki/cert/private/account.key
    account_email: [email protected]
    src: /etc/pki/cert/csr/sample.com.csr
    cert: /etc/httpd/ssl/sample.com.crt
    fullchain: /etc/httpd/ssl/sample.com-fullchain.crt
    chain: /etc/httpd/ssl/sample.com-intermediate.crt
    challenge: tls-alpn-01
    remaining_days: 60
    data: "{{ sample_com_challenge }}"
    # We use Let's Encrypt's ACME v2 endpoint
    acme_directory: https://acme-v02.api.letsencrypt.org/directory
    acme_version: 2
    # The following makes sure that if a chain with /CN=DST Root CA X3 in its issuer is provided
    # as an alternative, it will be selected. These are the roots cross-signed by IdenTrust.
    # As long as Let's Encrypt provides alternate chains with the cross-signed root(s) when
    # switching to their own ISRG Root X1 root, this will use the chain ending with a cross-signed
    # root. This chain is more compatible with older TLS clients.
    select_chain:
      - test_certificates: last
        issuer:
          CN: DST Root CA X3
          O: Digital Signature Trust Co.
  when: sample_com_challenge is changed

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

account_uri

string

ACME account URI.

Returned: changed

all_chains

list / elements=dictionary

When retrieve_all_alternates is set to yes, the module will query the ACME server for alternate chains. This return value will contain a list of all chains returned, the first entry being the main chain returned by the server.

See Section 7.4.2 of RFC8555 for details.

Returned: when certificate was retrieved and retrieve_all_alternates is set to yes

cert

string

The leaf certificate itself, in PEM format.

Returned: always

chain

string

The certificate chain, excluding the root, as concatenated PEM certificates.

Returned: always

full_chain

string

The certificate chain, excluding the root, but including the leaf certificate, as concatenated PEM certificates.

Returned: always

authorizations

dictionary

ACME authorization data.

Maps an identifier to ACME authorization objects. See https://tools.ietf.org/html/rfc8555#section-7.1.4.

Returned: changed

Sample: “{\”example.com\”:{…}}”

cert_days

integer

The number of days the certificate remains valid.

Returned: success

challenge_data

list / elements=dictionary

Per identifier / challenge type challenge data.

Since Ansible 2.8.5, only challenges which are not yet valid are returned.

Returned: changed

record

string

The full DNS record’s name for the challenge.

Returned: changed and challenge is dns-01

Sample: “_acme-challenge.example.com”

resource

string

The challenge resource that must be created for validation.

Returned: changed

Sample: “.well-known/acme-challenge/evaGxfADs6pSRb2LAv9IZf17Dt3juxGJ-PCt92wr-oA”

resource_original

string

The original challenge resource including type identifier for tls-alpn-01 challenges.

Returned: changed and challenge is tls-alpn-01

Sample:DNS:example.com

resource_value

string

The value the resource has to produce for the validation.

For http-01 and dns-01 challenges, the value can be used as-is.

For tls-alpn-01 challenges, note that this return value contains a Base64 encoded version of the correct binary blob which has to be put into the acmeValidation x509 extension; see https://www.rfc-editor.org/rfc/rfc8737.html#section-3 for details. To do this, you might need the b64decode Jinja filter to extract the binary blob from this return value.

Returned: changed

Sample: “IlirfxKKXA…17Dt3juxGJ-PCt92wr-oA”

challenge_data_dns

dictionary

List of TXT values per DNS record, in case challenge is dns-01.

Since Ansible 2.8.5, only challenges which are not yet valid are returned.

Returned: changed

finalization_uri

string

ACME finalization URI.

Returned: changed

order_uri

string

ACME order URI.

Returned: changed

Authors

  • Michael Gruener (@mgruener)