community.network.ce_bgp_af module – Manages BGP Address-family configuration on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 3.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_bgp_af.

Synopsis

  • Manages BGP Address-family configurations on HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

active_route_advertise

string

If the value is true, BGP is enabled to advertise only optimal routes in the RM to peers. If the value is false, BGP is not enabled to advertise only optimal routes in the RM to peers.

Choices:

  • no_use ← (default)

  • true

  • false

add_path_sel_num

string

Number of Add-Path routes. The value is an integer ranging from 2 to 64.

af_type

string / required

Address family type of a BGP instance.

Choices:

  • ipv4uni

  • ipv4multi

  • ipv4vpn

  • ipv6uni

  • ipv6vpn

  • evpn

allow_invalid_as

string

Allow routes with BGP origin AS validation result Invalid to be selected. If the value is true, invalid routes can participate in route selection. If the value is false, invalid routes cannot participate in route selection.

Choices:

  • no_use ← (default)

  • true

  • false

always_compare_med

string

If the value is true, the MEDs of routes learned from peers in different autonomous systems are compared when BGP selects an optimal route. If the value is false, the MEDs of routes learned from peers in different autonomous systems are not compared when BGP selects an optimal route.

Choices:

  • no_use ← (default)

  • true

  • false

as_path_neglect

string

If the value is true, the AS path attribute is ignored when BGP selects an optimal route. If the value is false, the AS path attribute is not ignored when BGP selects an optimal route. An AS path with a smaller length has a higher priority.

Choices:

  • no_use ← (default)

  • true

  • false

auto_frr_enable

string

If the value is true, BGP auto FRR is enabled. If the value is false, BGP auto FRR is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

default_local_pref

string

Set the Local-Preference attribute. The value is an integer. The value is an integer ranging from 0 to 4294967295.

default_med

string

Specify the Multi-Exit-Discriminator (MED) of BGP routes. The value is an integer ranging from 0 to 4294967295.

default_rt_import_enable

string

If the value is true, importing default routes to the BGP routing table is allowed. If the value is false, importing default routes to the BGP routing table is not allowed.

Choices:

  • no_use ← (default)

  • true

  • false

determin_med

string

If the value is true, BGP deterministic-MED is enabled. If the value is false, BGP deterministic-MED is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

ebgp_ecmp_nexthop_changed

string

If the value is true, the next hop of an advertised route is changed to the advertiser itself in EBGP load-balancing scenarios. If the value is false, the next hop of an advertised route is not changed to the advertiser itself in EBGP load-balancing scenarios.

Choices:

  • no_use ← (default)

  • true

  • false

ebgp_if_sensitive

string

If the value is true, after the fast EBGP interface awareness function is enabled, EBGP sessions on an interface are deleted immediately when the interface goes Down. If the value is false, after the fast EBGP interface awareness function is enabled, EBGP sessions on an interface are not deleted immediately when the interface goes Down.

Choices:

  • no_use ← (default)

  • true

  • false

ecmp_nexthop_changed

string

If the value is true, the next hop of an advertised route is changed to the advertiser itself in BGP load-balancing scenarios. If the value is false, the next hop of an advertised route is not changed to the advertiser itself in BGP load-balancing scenarios.

Choices:

  • no_use ← (default)

  • true

  • false

ibgp_ecmp_nexthop_changed

string

If the value is true, the next hop of an advertised route is changed to the advertiser itself in IBGP load-balancing scenarios. If the value is false, the next hop of an advertised route is not changed to the advertiser itself in IBGP load-balancing scenarios.

Choices:

  • no_use ← (default)

  • true

  • false

igp_metric_ignore

string

If the value is true, the metrics of next-hop IGP routes are not compared when BGP selects an optimal route. If the value is false, the metrics of next-hop IGP routes are not compared when BGP selects an optimal route. A route with a smaller metric has a higher priority.

Choices:

  • no_use ← (default)

  • true

  • false

import_process_id

string

Process ID of an imported routing protocol. The value is an integer ranging from 0 to 4294967295.

import_protocol

string

Routing protocol from which routes can be imported.

Choices:

  • direct

  • ospf

  • isis

  • static

  • rip

  • ospfv3

  • ripng

ingress_lsp_policy_name

string

Ingress lsp policy name.

load_balancing_as_path_ignore

string

Load balancing as path ignore.

Choices:

  • no_use ← (default)

  • true

  • false

lowest_priority

string

If the value is true, enable reduce priority to advertise route. If the value is false, disable reduce priority to advertise route.

Choices:

  • no_use ← (default)

  • true

  • false

mask_len

string

Specify the mask length of an IP address. The value is an integer ranging from 0 to 128.

max_load_ebgp_num

string

Specify the maximum number of equal-cost EBGP routes. The value is an integer ranging from 1 to 65535.

max_load_ibgp_num

string

Specify the maximum number of equal-cost IBGP routes. The value is an integer ranging from 1 to 65535.

maximum_load_balance

string

Specify the maximum number of equal-cost routes in the BGP routing table. The value is an integer ranging from 1 to 65535.

med_none_as_maximum

string

If the value is true, when BGP selects an optimal route, the system uses 4294967295 as the MED value of a route if the route’s attribute does not carry a MED value. If the value is false, the system uses 0 as the MED value of a route if the route’s attribute does not carry a MED value.

Choices:

  • no_use ← (default)

  • true

  • false

network_address

string

Specify the IP address advertised by BGP. The value is a string of 0 to 255 characters.

next_hop_sel_depend_type

string

Next hop select depend type.

Choices:

  • default ← (default)

  • dependTunnel

  • dependIp

nexthop_third_party

string

If the value is true, the third-party next hop function is enabled. If the value is false, the third-party next hop function is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

nhp_relay_route_policy_name

string

Specify the name of a route-policy for route iteration. The value is a string of 1 to 40 characters.

originator_prior

string

Originator prior.

Choices:

  • no_use ← (default)

  • true

  • false

policy_ext_comm_enable

string

If the value is true, modifying extended community attributes is allowed. If the value is false, modifying extended community attributes is not allowed.

Choices:

  • no_use ← (default)

  • true

  • false

policy_vpn_target

string

If the value is true, VPN-Target filtering function is performed for received VPN routes. If the value is false, VPN-Target filtering function is not performed for received VPN routes.

Choices:

  • no_use ← (default)

  • true

  • false

preference_external

string

Set the protocol priority of EBGP routes. The value is an integer ranging from 1 to 255.

preference_internal

string

Set the protocol priority of IBGP routes. The value is an integer ranging from 1 to 255.

preference_local

string

Set the protocol priority of a local BGP route. The value is an integer ranging from 1 to 255.

prefrence_policy_name

string

Set a routing policy to filter routes so that a configured priority is applied to the routes that match the specified policy. The value is a string of 1 to 40 characters.

reflect_between_client

string

If the value is true, route reflection is enabled between clients. If the value is false, route reflection is disabled between clients.

Choices:

  • no_use ← (default)

  • true

  • false

reflect_chg_path

string

If the value is true, the route reflector is enabled to modify route path attributes based on an export policy. If the value is false, the route reflector is disabled from modifying route path attributes based on an export policy.

Choices:

  • no_use ← (default)

  • true

  • false

reflector_cluster_id

string

Set a cluster ID. Configuring multiple RRs in a cluster can enhance the stability of the network. The value is an integer ranging from 1 to 4294967295.

reflector_cluster_ipv4

string

Set a cluster ipv4 address. The value is expressed in the format of an IPv4 address.

relay_delay_enable

string

If the value is true, relay delay enable. If the value is false, relay delay disable.

Choices:

  • no_use ← (default)

  • true

  • false

rib_only_enable

string

If the value is true, BGP routes cannot be advertised to the IP routing table. If the value is false, Routes preferred by BGP are advertised to the IP routing table.

Choices:

  • no_use ← (default)

  • true

  • false

rib_only_policy_name

string

Specify the name of a routing policy. The value is a string of 1 to 40 characters.

route_sel_delay

string

Route selection delay. The value is an integer ranging from 0 to 3600.

router_id

string

ID of a router that is in IPv4 address format. The value is a string of 0 to 255 characters. The value is in dotted decimal notation.

router_id_neglect

string

If the value is true, the router ID attribute is ignored when BGP selects the optimal route. If the value is false, the router ID attribute is not ignored when BGP selects the optimal route.

Choices:

  • no_use ← (default)

  • true

  • false

rr_filter_number

string

Set the number of the extended community filter supported by an RR group. The value is a string of 1 to 51 characters.

state

string

Specify desired state of the resource.

Choices:

  • present ← (default)

  • absent

summary_automatic

string

If the value is true, automatic aggregation is enabled for locally imported routes. If the value is false, automatic aggregation is disabled for locally imported routes.

Choices:

  • no_use ← (default)

  • true

  • false

supernet_label_adv

string

If the value is true, the function to advertise supernetwork label is enabled. If the value is false, the function to advertise supernetwork label is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

supernet_uni_adv

string

If the value is true, the function to advertise supernetwork unicast routes is enabled. If the value is false, the function to advertise supernetwork unicast routes is disabled.

Choices:

  • no_use ← (default)

  • true

  • false

vrf_name

string / required

Name of a BGP instance. The name is a case-sensitive string of characters. The BGP instance can be used only after the corresponding VPN instance is created. The value is a string of 1 to 31 case-sensitive characters.

vrf_rid_auto_sel

string

If the value is true, VPN BGP instances are enabled to automatically select router IDs. If the value is false, VPN BGP instances are disabled from automatically selecting router IDs.

Choices:

  • no_use ← (default)

  • true

  • false

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: CloudEngine BGP address family test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli
  tasks:
  - name: "Config BGP Address_Family"
    community.network.ce_bgp_af:
      state: present
      vrf_name: js
      af_type: ipv4uni
      provider: "{{ cli }}"
  - name: "Undo BGP Address_Family"
    community.network.ce_bgp_af:
      state: absent
      vrf_name: js
      af_type: ipv4uni
      provider: "{{ cli }}"
  - name: "Config import route"
    community.network.ce_bgp_af:
      state: present
      vrf_name: js
      af_type: ipv4uni
      import_protocol: ospf
      import_process_id: 123
      provider: "{{ cli }}"
  - name: "Undo import route"
    community.network.ce_bgp_af:
      state: absent
      vrf_name: js
      af_type: ipv4uni
      import_protocol: ospf
      import_process_id: 123
      provider: "{{ cli }}"
  - name: "Config network route"
    community.network.ce_bgp_af:
      state: present
      vrf_name: js
      af_type: ipv4uni
      network_address: 1.1.1.1
      mask_len: 24
      provider: "{{ cli }}"
  - name: "Undo network route"
    community.network.ce_bgp_af:
      state: absent
      vrf_name: js
      af_type: ipv4uni
      network_address: 1.1.1.1
      mask_len: 24
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of aaa params after module execution

Returned: always

Sample: {“af_type”: “ipv4uni”, “vrf_name”: “js”}

existing

dictionary

k/v pairs of existing aaa server

Returned: always

Sample: {}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {“af_type”: “ipv4uni”, “state”: “present”, “vrf_name”: “js”}

updates

list / elements=string

command sent to the device

Returned: always

Sample: [“ipv4-family vpn-instance js”]

Authors

  • wangdezhuang (@QijunPan)