community.network.ce_dldp_interface module – Manages interface DLDP configuration on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 3.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_dldp_interface.

Synopsis

  • Manages interface DLDP configuration on HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

enable

string

Set interface DLDP enable state.

Choices:

  • enable

  • disable

interface

string / required

Must be fully qualified interface name, i.e. GE1/0/1, 10GE1/0/1, 40GE1/0/22, 100GE1/0/1.

local_mac

string

Set the source MAC address for DLDP packets sent in the DLDP-compatible mode. The value of MAC address is in H-H-H format. H contains 1 to 4 hexadecimal digits.

mode_enable

string

Set DLDP compatible-mode enable state.

Choices:

  • enable

  • disable

reset

string

Specify whether reseting interface DLDP state.

Choices:

  • enable

  • disable

state

string

Manage the state of the resource.

Choices:

  • present ← (default)

  • absent

Notes

Note

  • If state=present, enable=disable, interface DLDP enable will be turned off and related interface DLDP configuration will be cleared.

  • If state=absent, only local_mac is supported to configure.

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: DLDP interface test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Configure interface DLDP enable state and ensure global dldp enable is turned on"
    community.network.ce_dldp_interface:
      interface: 40GE2/0/1
      enable: enable
      provider: "{{ cli }}"

  - name: "Configuire interface DLDP compatible-mode enable state  and ensure interface DLDP state is already enabled"
    community.network.ce_dldp_interface:
      interface: 40GE2/0/1
      enable: enable
      mode_enable: enable
      provider: "{{ cli }}"

  - name: "Configuire the source MAC address for DLDP packets sent in the DLDP-compatible mode  and
           ensure interface DLDP state and compatible-mode enable state  is already enabled"
    community.network.ce_dldp_interface:
      interface: 40GE2/0/1
      enable: enable
      mode_enable: enable
      local_mac: aa-aa-aa
      provider: "{{ cli }}"

  - name: "Reset DLDP state of specified interface and ensure interface DLDP state is already enabled"
    community.network.ce_dldp_interface:
      interface: 40GE2/0/1
      enable: enable
      reset: enable
      provider: "{{ cli }}"

  - name: "Unconfigure interface DLDP local mac address when C(state=absent)"
    community.network.ce_dldp_interface:
      interface: 40GE2/0/1
      state: absent
      local_mac: aa-aa-aa
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of interface DLDP configuration after module execution

Returned: always

Sample: {“enable”: “enable”, “interface”: “40GE2/0/22”, “local_mac”: “00aa-00aa-00aa”, “mode_enable”: “enable”, “reset”: “enable”}

existing

dictionary

k/v pairs of existing interface DLDP configuration

Returned: always

Sample: {“enable”: “disable”, “interface”: “40GE2/0/22”, “local_mac”: null, “mode_enable”: null, “reset”: “disable”}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {“enable”: “enalbe”, “interface”: “40GE2/0/22”, “local_mac”: “aa-aa-aa”, “mode_enable”: “enable”, “reset”: “enable”}

updates

list / elements=string

command sent to the device

Returned: always

Sample: [“dldp enable”, “dldp compatible-mode enable”, “dldp compatible-mode local-mac aa-aa-aa”, “dldp reset”]

Authors

  • Zhou Zhijin (@QijunPan)