community.network.pn_port_cos_rate_setting module – CLI command to modify port-cos-rate-setting

Note

This module is part of the community.network collection (version 3.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_port_cos_rate_setting.

Synopsis

  • This modules can be used to update the port cos rate limit.

Parameters

Parameter

Comments

pn_cliswitch

string

Target switch to run the CLI on.

pn_cos0_rate

string

cos0 rate limit (pps) unlimited or 0 to 10000000.

pn_cos1_rate

string

cos1 rate limit (pps) unlimited or 0 to 10000000.

pn_cos2_rate

string

cos2 rate limit (pps) unlimited or 0 to 10000000.

pn_cos3_rate

string

cos3 rate limit (pps) unlimited or 0 to 10000000.

pn_cos4_rate

string

cos4 rate limit (pps) unlimited or 0 to 10000000.

pn_cos5_rate

string

cos5 rate limit (pps) unlimited or 0 to 10000000.

pn_cos6_rate

string

cos6 rate limit (pps) unlimited or 0 to 10000000.

pn_cos7_rate

string

cos7 rate limit (pps) unlimited or 0 to 10000000.

pn_port

string

port.

Choices:

  • control-port

  • data-port

  • span-ports

state

string / required

State the action to perform. Use update to modify the port-cos-rate-setting.

Choices:

  • update

Examples

- name: Port cos rate modify
  community.network.pn_port_cos_rate_setting:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "control-port"
    pn_cos1_rate: "1000"
    pn_cos5_rate: "1000"
    pn_cos2_rate: "1000"
    pn_cos0_rate: "1000"

- name: Port cos rate modify
  community.network.pn_port_cos_rate_setting:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "data-port"
    pn_cos1_rate: "2000"
    pn_cos5_rate: "2000"
    pn_cos2_rate: "2000"
    pn_cos0_rate: "2000"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

indicates whether the CLI caused changes on the target.

Returned: always

command

string

the CLI command run on the target node.

Returned: always

stderr

list / elements=string

set of error responses from the port-cos-rate-setting command.

Returned: on error

stdout

list / elements=string

set of responses from the port-cos-rate-setting command.

Returned: always

Authors

  • Pluribus Networks (@rajaspachipulusu17)