community.vmware.vmware_guest_controller module – Manage disk or USB controllers related to virtual machine in given vCenter infrastructure
Note
This module is part of the community.vmware collection (version 1.18.2).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.vmware.
To use it in a playbook, specify: community.vmware.vmware_guest_controller.
Synopsis
This module can be used to add, remove disk controllers or USB controllers belonging to given virtual machine.
All parameters and VMware object names are case sensitive.
Requirements
The below requirements are needed on the host that executes this module.
python >= 2.7
PyVmomi
Parameters
Parameter |
Comments |
|---|---|
A list of disk or USB controllers to add or remove. Total 4 disk controllers with the same type are allowed per VM. Total 2 USB controllers are allowed per VM, 1 USB 2.0 and 1 USB 3.0 or 3.1. For specific guest OS, supported controller types please refer to VMware Compatibility Guide. |
|
Bus sharing type for SCSI controller. Choices:
|
|
Disk controller bus number. When When Choices:
|
|
Add new controller or remove specified existing controller. If If specified controller is removed or not exist, no action will be taken only warning message. If If the number of controller with specified controller type reaches it’s maximum, no action will be taken only warning message. Choices:
|
|
Type of disk or USB controller. From vSphere 6.5 and virtual machine with hardware version 13, Choices:
|
|
The datacenter name to which virtual machine belongs to. Default: “ha-datacenter” |
|
Destination folder, absolute or relative path to find an existing guest. This is a required parameter, only if multiple VMs are found with same name. The folder should include the datacenter. ESX’s datacenter is ha-datacenter Examples:
|
|
Whether to collect existing disk and USB controllers facts only. When this parameter is set to Choices:
|
|
The hostname or IP address of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable Environment variable support added in Ansible 2.6. |
|
Managed Object ID of the instance to manage if known, this is a unique identifier only within a single vCenter instance. This is required if |
|
Name of the virtual machine. This is a required parameter, if parameter |
|
The password of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable Environment variable support added in Ansible 2.6. |
|
The port number of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable Environment variable support added in Ansible 2.6. Default: 443 |
|
Address of a proxy that will receive all HTTPS requests and relay them. The format is a hostname or a IP. If the value is not specified in the task, the value of environment variable This feature depends on a version of pyvmomi greater than v6.7.1.2018.12 |
|
Port of the HTTP proxy that will receive all HTTPS requests and relay them. If the value is not specified in the task, the value of environment variable |
|
The sleep time in seconds after VM reconfigure task completes, used when not get the updated VM controller facts after VM reconfiguration. This parameter is not required. Maximum value is 600. Default: 10 |
|
Whether to use the VMware instance UUID rather than the BIOS UUID. Choices:
|
|
The username of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable Environment variable support added in Ansible 2.6. |
|
UUID of the instance to gather facts if known, this is VMware’s unique identifier. This is a required parameter, if parameter |
|
Allows connection when SSL certificates are not valid. Set to If the value is not specified in the task, the value of environment variable Environment variable support added in Ansible 2.6. If set to Choices:
|
Notes
Note
Tested on vSphere 6.0, 6.5 and 6.7
All modules requires API write access and hence is not supported on a free ESXi license.
Examples
- name: Add disk and USB 3.0 controllers for virtual machine located by name
community.vmware.vmware_guest_controller:
hostname: "{{ vcenter_hostname }}"
username: "{{ vcenter_username }}"
password: "{{ vcenter_password }}"
datacenter: "{{ datacenter_name }}"
name: test_VM
controllers:
- state: present
type: sata
- state: present
type: nvme
- state: present
type: usb3
delegate_to: localhost
register: disk_controller_facts
- name: Remove disk controllers and USB 2.0 from virtual machine located by moid
community.vmware.vmware_guest_controller:
hostname: "{{ vcenter_hostname }}"
username: "{{ vcenter_username }}"
password: "{{ vcenter_password }}"
datacenter: "{{ datacenter_name }}"
moid: vm-33
controllers:
- state: absent
controller_number: 1
type: sata
- state: absent
controller_number: 0
type: nvme
- state: absent
type: usb2
delegate_to: localhost
register: disk_controller_facts
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
metadata about the virtual machine’s existing disk controllers or after adding or removing operation Returned: always Sample: {“nvme”: {“0”: {“controller_busnumber”: 0, “controller_controllerkey”: 100, “controller_devicekey”: 31000, “controller_disks_devicekey”: [], “controller_label”: “NVME controller 0”, “controller_summary”: “NVME controller 0”, “controller_unitnumber”: 30}}, “sata”: {“0”: {“controller_busnumber”: 0, “controller_controllerkey”: 100, “controller_devicekey”: 15000, “controller_disks_devicekey”: [16000, 16001], “controller_label”: “SATA controller 0”, “controller_summary”: “AHCI”, “controller_unitnumber”: 24}}, “scsi”: {“0”: {“controller_bus_sharing”: “noSharing”, “controller_busnumber”: 0, “controller_controllerkey”: 100, “controller_devicekey”: 1000, “controller_disks_devicekey”: [2000], “controller_label”: “SCSI controller 0”, “controller_summary”: “LSI Logic SAS”, “controller_unitnumber”: 3}, “1”: {“controller_bus_sharing”: “physicalSharing”, “controller_busnumber”: 1, “controller_controllerkey”: 100, “controller_devicekey”: 1001, “controller_disks_devicekey”: [], “controller_label”: “SCSI controller 1”, “controller_summary”: “VMware paravirtual SCSI”, “controller_unitnumber”: 4}}, “usb2”: {“0”: {“controller_busnumber”: 0, “controller_controllerkey”: 100, “controller_devicekey”: 7000, “controller_disks_devicekey”: [], “controller_label”: “USB Controller”, “controller_summary”: “Auto connect Disabled”, “controller_unitnumber”: 22}}} |
Authors
Diane Wang (@Tomorrow9)