You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

f5networks.f5_modules.bigip_device_auth_ldap module – Manage LDAP device authentication settings on BIG-IP

Note

This module is part of the f5networks.f5_modules collection (version 1.17.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_device_auth_ldap.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

• Manage LDAP device authentication settings on BIG-IP.

Parameters

Parameter	Comments
bind_dn string	Specifies the distinguished name for the Active Directory or LDAP server user ID. The BIG-IP client authentication module does not support Active Directory or LDAP servers that do not perform bind referral when authenticating referred accounts. Therefore, if you plan to use Active Directory or LDAP as your authentication source and want to use referred accounts, make sure your servers perform bind referral.
bind_password string	Specifies a password for the Active Directory or LDAP server user ID.
ca_cert aliases: ssl_ca_cert string	Specifies the name of an SSL certificate from a certificate authority (CA). To remove this value, use the reserved value none.
check_member_attr boolean	Checks the member attribute of the user in the remote LDAP or AD group. Choices: no yes
client_cert aliases: ssl_client_cert string	Specifies the name of an SSL client certificate. To remove this value, use the reserved value none.
client_key aliases: ssl_client_key string	Specifies the name of an SSL client key. To remove this value, use the reserved value none.
fallback_to_local boolean	Specifies the system uses the Local authentication method if the remote authentication method is not available. Option only available on TMOS 13.0.0 and above. Choices: no yes
login_ldap_attr string	Specifies the LDAP directory attribute containing the local user name that is associated with the selected directory entry. If this parameter is not specified, when configuring LDAP device authentication for the first time, the default port is samaccountname.
port integer	Specifies the port the system uses for access to the remote host server. When configuring LDAP device authentication for the first time, the default port is 389 if this parameter is not specified.
provider dictionary added in 1.0.0 of f5networks.f5_modules	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If yes, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable F5_TELEMETRY_OFF. Previously used variable F5_TEEM is deprecated as its name was confusing. Choices: no ← (default) yes
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD.
server string / required	The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. Default: 443
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: rest ← (default)
user string / required	The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
validate_certs boolean	If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS. Choices: no yes ← (default)
remote_directory_tree string	Specifies the file location (tree) of the user authentication database on the server.
scope string	Specifies the level of the remote Active Directory or LDAP directory the system should search for the user authentication. Choices: sub one base
servers list / elements=string	Specifies the LDAP servers the system must use to obtain authentication information. You must specify a server when you create an LDAP configuration object.
source_type string added in 1.13.0 of f5networks.f5_modules	Specifies the auth source for user authentication, should be used with use_for_auth. Choices: ldap ← (default) active-directory
ssl string	Specifies whether the system uses an SSL port to communicate with the LDAP server. Choices: yes no start-tls
state string	When present, ensures the device authentication method exists. When absent, ensures the device authentication method does not exist. When state equal to (absent), before you can delete the LDAP configuration, the system must set auth to some alternative. The system ships with a system auth called local, therefore the system authentication type is set to that value on the device upon removal of LDAP configuration. Choices: present ← (default) absent
update_password string	always always updates the bind_password. on_create only sets the bind_password for newly created authentication mechanisms. Choices: always ← (default) on_create
use_for_auth boolean	Specifies whether or not this auth source is put in use on the system. If yes, the module sets the current system auth type to the value of ldap. If no, the module sets the authentication type to local, similar behavior to when state is absent, without removing the configured LDAP resource. Choices: no yes
user_template string	Specifies the distinguished name of the user who is logging on. You specify the template as a variable that the system replaces with user-specific information during the logon attempt. For example, you could specify a user template such as %s@siterequest.com or uxml:id=%s,ou=people,dc=siterequest,dc=com. When a user attempts to log on, the system replaces %s with the name the user specified in the Basic Authentication dialog box, and passes that as the distinguished name for the bind operation. The system passes the associated password as the password for the bind operation. This field can contain only one %s and cannot contain any other format specifiers.
validate_certs aliases: ssl_check_peer boolean	Specifies whether the system checks an SSL peer, as a result of which the system requires and verifies the server certificate. Choices: no yes

Notes

Note

• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

• Requires BIG-IP software version >= 12.

• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create an LDAP authentication object
  bigip_device_auth_ldap:
    name: foo
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
bind_dn string	The distinguished name for the Active Directory or LDAP server user ID. Returned: changed Sample: “user@foobar.local”
ca_cert string	The name of an SSL certificate from a certificate authority. Returned: changed Sample: “My-Trusted-CA-Bundle.crt”
check_member_attr boolean	The user’s member attribute in the remote LDAP or AD group. Returned: changed Sample: true
client_cert string	The name of an SSL client certificate. Returned: changed Sample: “MyCert.crt”
client_key string	The name of an SSL client key. Returned: changed Sample: “MyKey.key”
fallback_to_local boolean	Specifies the system uses the Local authentication method as fallback Returned: changed Sample: true
login_ldap_attr string	The LDAP directory attribute containing the local user name associated with the selected directory entry. Returned: changed Sample: “samaccountname”
port integer	The port the system uses for access to the remote LDAP server. Returned: changed Sample: 389
remote_directory_tree string	File location (tree) of the user authentication database on the server. Returned: changed Sample: “CN=Users,DC=FOOBAR,DC=LOCAL”
scope string	The level of the remote Active Directory or LDAP directory searched for user authentication. Returned: changed Sample: “base”
servers list / elements=string	LDAP servers used by the system to obtain authentication information. Returned: changed Sample: [“192.168.1.1”, “192.168.1.2”]
ssl string	Specifies whether the system uses an SSL port to communicate with the LDAP server. Returned: changed Sample: “start-tls”
user_template string	The distinguished name of the user who is logging on. Returned: changed Sample: “uid=%s,ou=people,dc=foobar,dc=local”
validate_certs boolean	Indicates if the system checks an SSL peer. Returned: changed Sample: true

Authors

• Tim Rupp (@caphrim007)

• Wojciech Wypior (@wojtek0806)

Collection links

Issue Tracker Homepage Repository (Sources)