You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

f5networks.f5_modules.bigip_device_auth_radius_server module – Manages the RADIUS server configuration of the device

Note

This module is part of the f5networks.f5_modules collection (version 1.17.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_device_auth_radius_server.

New in version 1.3.0: of f5networks.f5_modules

Synopsis

• Manages a device’s RADIUS server configuration.

• Used in tandem with the bigip_device_auth_radius module.

Parameters

Parameter	Comments
description string	The description of the RADIUS server.
ip string	The IP address of the server. This parameter is mandatory when creating a new resource.
name string / required	Specifies the name of the RADIUS server to manage.
partition string	Device partition to manage resources on. Default: “Common”
port integer	The port of the server. Valid range of values is between 0 and 65535 inclusive.
provider dictionary added in 1.0.0 of f5networks.f5_modules	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If yes, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable F5_TELEMETRY_OFF. Previously used variable F5_TEEM is deprecated as its name was confusing. Choices: no ← (default) yes
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD.
server string / required	The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. Default: 443
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: rest ← (default)
user string / required	The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
validate_certs boolean	If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS. Choices: no yes ← (default)
secret string	Specifies the secret used for accessing RADIUS server. This parameter is mandatory when creating a new resource.
state string	When state is present, ensures the RADIUS server exists. When state is absent, ensures the RADIUS server is removed. Choices: present ← (default) absent
timeout integer	Specifies the timeout value in seconds. Valid range of values is between 1 and 60 inclusive.
update_secret string	always will update passwords if the secret is specified. on_create will only set the password for newly created servers. Choices: always ← (default) on_create

Notes

Note

• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

• Requires BIG-IP software version >= 12.

• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a RADIUS server configuration
  bigip_device_auth_radius_server:
    name: "ansible_test"
    ip: "1.1.1.1"
    port: 1812
    secret: "secret"
    timeout: 5
    update_secret: on_create
    state: present
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Update RADIUS server configuration
  bigip_device_auth_radius_server:
    name: "ansible_test"
    ip: "10.10.10.1"
    description: "this is a test"
    port: 1813
    timeout: 10
    state: present
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove RADIUS server configuration
  bigip_device_auth_radius_server:
    name: "ansible_test"
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
description string	User defined description of the RADIUS server. Returned: changed Sample: “this is my server”
ip string	IP address of the RADIUS Server. Returned: changed Sample: “1.1.1.1”
port integer	RADIUS service port. Returned: changed Sample: 1812
timeout integer	Timeout value. Returned: changed Sample: 3

Authors

• Wojciech Wypior (@wojtek0806)

Collection links

Issue Tracker Homepage Repository (Sources)