fortinet.fortimanager.fmgr_wanprof_system_sdwan module – Configure redundant internet connections using SD-WAN

Note

This module is part of the fortinet.fortimanager collection (version 2.1.5).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortimanager.

To use it in a playbook, specify: fortinet.fortimanager.fmgr_wanprof_system_sdwan.

New in version 2.10: of fortinet.fortimanager

Synopsis

  • This module is able to configure a FortiManager device.

  • Examples include all parameters and values which need to be adjusted to data sources before usage.

Parameters

Parameter

Comments

adom

string / required

the parameter (adom) in requested url

bypass_validation

boolean

only set to True when module schema diffs with FortiManager API structure, module continues to execute without validating parameters

Choices:

  • no ← (default)

  • yes

enable_log

boolean

Enable/Disable logging for task

Choices:

  • no ← (default)

  • yes

proposed_method

string

The overridden method for the underlying Json RPC request

Choices:

  • update

  • set

  • add

rc_failed

list / elements=string

the rc codes list with which the conditions to fail will be overriden

rc_succeeded

list / elements=string

the rc codes list with which the conditions to succeed will be overriden

state

string / required

the directive to create, update or delete an object

Choices:

  • present

  • absent

wanprof

string / required

the parameter (wanprof) in requested url

wanprof_system_sdwan

dictionary

the top level parameters set

duplication

list / elements=string

no description

dstaddr

string

Destination address or address group names.

dstaddr6

string

Destination address6 or address6 group names.

dstintf

string

Outgoing (egress) interfaces or zones.

id

integer

Duplication rule ID (1 - 255).

packet-de-duplication

string

Enable/disable discarding of packets that have been duplicated.

Choices:

  • disable

  • enable

packet-duplication

string

Configure packet duplication method.

Choices:

  • disable

  • force

  • on-demand

service

string

Service and service group name.

service-id

string

SD-WAN service rule ID list.

srcaddr

string

Source address or address group names.

srcaddr6

string

Source address6 or address6 group names.

srcintf

string

Incoming (ingress) interfaces or zones.

duplication-max-num

integer

Maximum number of interface members a packet is duplicated in the SD-WAN zone (2 - 4, default = 2; if set to 3, the original p…

fail-detect

string

Enable/disable SD-WAN Internet connection status checking (failure detection).

Choices:

  • disable

  • enable

health-check

list / elements=string

no description

_dynamic-server

string

no description

addr-mode

string

Address mode (IPv4 or IPv6).

Choices:

  • ipv4

  • ipv6

detect-mode

string

The mode determining how to detect the server.

Choices:

  • active

  • passive

  • prefer-passive

diffservcode

string

Differentiated services code point (DSCP) in the IP header of the probe packet.

dns-match-ip

string

Response IP expected from DNS server if the protocol is DNS.

dns-request-domain

string

Fully qualified domain name to resolve for the DNS probe.

failtime

integer

Number of failures before server is considered lost (1 - 3600, default = 5).

ftp-file

string

Full path and file name on the FTP server to download for FTP health-check to probe.

ftp-mode

string

FTP mode.

Choices:

  • passive

  • port

ha-priority

integer

HA election priority (1 - 50).

http-agent

string

String in the http-agent field in the HTTP header.

http-get

string

URL used to communicate with the server if the protocol if the protocol is HTTP.

http-match

string

Response string expected from the server if the protocol is HTTP.

interval

integer

Status check interval in milliseconds, or the time between attempting to connect to the server (500 - 3600*1000 msec, …

members

string

Member sequence number list.

name

string

Status check or health check name.

packet-size

integer

Packet size of a twamp test session,

password

string

no description

port

integer

Port number used to communicate with the server over the selected protocol (0-65535, default = 0, auto select. http, t…

probe-count

integer

Number of most recent probes that should be used to calculate latency and jitter (5 - 30, default = 30).

probe-packets

string

Enable/disable transmission of probe packets.

Choices:

  • disable

  • enable

probe-timeout

integer

Time to wait before a probe packet is considered lost (500 - 3600*1000 msec, default = 500).

protocol

string

Protocol used to determine if the FortiGate can communicate with the server.

Choices:

  • ping

  • tcp-echo

  • udp-echo

  • http

  • twamp

  • ping6

  • dns

  • tcp-connect

  • ftp

quality-measured-method

string

Method to measure the quality of tcp-connect.

Choices:

  • half-close

  • half-open

recoverytime

integer

Number of successful responses received before server is considered recovered (1 - 3600, default = 5).

security-mode

string

Twamp controller security mode.

Choices:

  • none

  • authentication

server

string

no description

sla

list / elements=string

no description

id

integer

SLA ID.

jitter-threshold

integer

Jitter for SLA to make decision in milliseconds. (0 - 10000000, default = 5).

latency-threshold

integer

Latency for SLA to make decision in milliseconds. (0 - 10000000, default = 5).

list / elements=string

no description

Choices:

  • latency

  • jitter

  • packet-loss

packetloss-threshold

integer

Packet loss for SLA to make decision in percentage. (0 - 100, default = 0).

sla-fail-log-period

integer

Time interval in seconds that SLA fail log messages will be generated (0 - 3600, default = 0).

sla-pass-log-period

integer

Time interval in seconds that SLA pass log messages will be generated (0 - 3600, default = 0).

system-dns

string

Enable/disable system DNS as the probe server.

Choices:

  • disable

  • enable

threshold-alert-jitter

integer

Alert threshold for jitter (ms, default = 0).

threshold-alert-latency

integer

Alert threshold for latency (ms, default = 0).

threshold-alert-packetloss

integer

Alert threshold for packet loss (percentage, default = 0).

threshold-warning-jitter

integer

Warning threshold for jitter (ms, default = 0).

threshold-warning-latency

integer

Warning threshold for latency (ms, default = 0).

threshold-warning-packetloss

integer

Warning threshold for packet loss (percentage, default = 0).

update-cascade-interface

string

Enable/disable update cascade interface.

Choices:

  • disable

  • enable

update-static-route

string

Enable/disable updating the static route.

Choices:

  • disable

  • enable

user

string

The user name to access probe server.

load-balance-mode

string

Algorithm or mode to use for load balancing Internet traffic to SD-WAN members.

Choices:

  • source-ip-based

  • weight-based

  • usage-based

  • source-dest-ip-based

  • measured-volume-based

members

list / elements=string

no description

_dynamic-member

string

no description

comment

string

Comments.

cost

integer

Cost of this interface for services in SLA mode (0 - 4294967295, default = 0).

gateway

string

The default gateway for this interface. Usually the default gateway of the Internet service provider that this interfa…

gateway6

string

IPv6 gateway.

ingress-spillover-threshold

integer

Ingress spillover threshold for this interface (0 - 16776000 kbit/s). When this traffic volume threshold is reached, n…

interface

string

Interface name.

priority

integer

Priority of the interface (0 - 65535). Used for SD-WAN rules or priority rules.

priority6

integer

Priority of the interface for IPv6 (1 - 65535, default = 1024). Used for SD-WAN rules or priority rules.

seq-num

integer

Sequence number(1-512).

source

string

Source IP address used in the health-check packet to the server.

source6

string

Source IPv6 address used in the health-check packet to the server.

spillover-threshold

integer

Egress spillover threshold for this interface (0 - 16776000 kbit/s). When this traffic volume threshold is reached, ne…

status

string

Enable/disable this interface in the SD-WAN.

Choices:

  • disable

  • enable

volume-ratio

integer

Measured volume ratio (this value / sum of all values = percentage of link volume, 1 - 255).

weight

integer

Weight of this interface for weighted load balancing. (1 - 255) More traffic is directed to interfaces with higher wei…

zone

string

Zone name.

neighbor

list / elements=string

no description

health-check

string

SD-WAN health-check name.

ip

string

IP/IPv6 address of neighbor.

member

string

Member sequence number.

role

string

Role of neighbor.

Choices:

  • primary

  • secondary

  • standalone

sla-id

integer

SLA ID.

neighbor-hold-boot-time

integer

Waiting period in seconds when switching from the primary neighbor to the secondary neighbor from the neighbor start. (0 - 100…

neighbor-hold-down

string

Enable/disable hold switching from the secondary neighbor to the primary neighbor.

Choices:

  • disable

  • enable

neighbor-hold-down-time

integer

Waiting period in seconds when switching from the secondary neighbor to the primary neighbor when hold-down is disabled. (0 - …

service

list / elements=string

no description

addr-mode

string

Address mode (IPv4 or IPv6).

Choices:

  • ipv4

  • ipv6

bandwidth-weight

integer

Coefficient of reciprocal of available bidirectional bandwidth in the formula of custom-profile-1.

default

string

Enable/disable use of SD-WAN as default service.

Choices:

  • disable

  • enable

dscp-forward

string

Enable/disable forward traffic DSCP tag.

Choices:

  • disable

  • enable

dscp-forward-tag

string

Forward traffic DSCP tag.

dscp-reverse

string

Enable/disable reverse traffic DSCP tag.

Choices:

  • disable

  • enable

dscp-reverse-tag

string

Reverse traffic DSCP tag.

dst

string

Destination address name.

dst-negate

string

Enable/disable negation of destination address match.

Choices:

  • disable

  • enable

dst6

string

Destination address6 name.

end-port

integer

End destination port number.

gateway

string

Enable/disable SD-WAN service gateway.

Choices:

  • disable

  • enable

groups

string

User groups.

hash-mode

string

Hash algorithm for selected priority members for load balance mode.

Choices:

  • round-robin

  • source-ip-based

  • source-dest-ip-based

  • inbandwidth

  • outbandwidth

  • bibandwidth

health-check

string

Health check list.

hold-down-time

integer

Waiting period in seconds when switching from the back-up member to the primary member (0 - 10000000, default = 0).

id

integer

SD-WAN rule ID (1 - 4000).

input-device

string

Source interface name.

input-device-negate

string

Enable/disable negation of input device match.

Choices:

  • disable

  • enable

internet-service

string

Enable/disable use of Internet service for application-based load balancing.

Choices:

  • disable

  • enable

internet-service-app-ctrl

integer

no description

internet-service-app-ctrl-group

string

Application control based Internet Service group list.

internet-service-custom

string

Custom Internet service name list.

internet-service-custom-group

string

Custom Internet Service group list.

internet-service-group

string

Internet Service group list.

internet-service-name

string

Internet service name list.

jitter-weight

integer

Coefficient of jitter in the formula of custom-profile-1.

latency-weight

integer

Coefficient of latency in the formula of custom-profile-1.

string

Link cost factor.

Choices:

  • latency

  • jitter

  • packet-loss

  • inbandwidth

  • outbandwidth

  • bibandwidth

  • custom-profile-1

integer

Percentage threshold change of link cost values that will result in policy route regeneration (0 - 10000000, default =…

minimum-sla-meet-members

integer

Minimum number of members which meet SLA.

mode

string

Control how the SD-WAN rule sets the priority of interfaces in the SD-WAN.

Choices:

  • auto

  • manual

  • priority

  • sla

  • load-balance

name

string

SD-WAN rule name.

packet-loss-weight

integer

Coefficient of packet-loss in the formula of custom-profile-1.

priority-members

string

Member sequence number list.

protocol

integer

Protocol number.

integer

Quality grade.

role

string

Service role to work with neighbor.

Choices:

  • primary

  • secondary

  • standalone

route-tag

integer

IPv4 route map route-tag.

sla

list / elements=string

no description

health-check

string

SD-WAN health-check.

id

integer

SLA ID.

sla-compare-method

string

Method to compare SLA value for SLA mode.

Choices:

  • order

  • number

src

string

Source address name.

src-negate

string

Enable/disable negation of source address match.

Choices:

  • disable

  • enable

src6

string

Source address6 name.

standalone-action

string

Enable/disable service when selected neighbor role is standalone while service role is not standalone.

Choices:

  • disable

  • enable

start-port

integer

Start destination port number.

status

string

Enable/disable SD-WAN service.

Choices:

  • disable

  • enable

tie-break

string

Method of selecting member if more than one meets the SLA.

Choices:

  • zone

  • cfg-order

  • fib-best-match

tos

string

Type of service bit pattern.

tos-mask

string

Type of service evaluated bits.

use-shortcut-sla

string

Enable/disable use of ADVPN shortcut for quality comparison.

Choices:

  • disable

  • enable

users

string

User name.

status

string

Enable/disable SD-WAN.

Choices:

  • disable

  • enable

zone

list / elements=string

no description

name

string

Zone name.

service-sla-tie-break

string

Method of selecting member if more than one meets the SLA.

Choices:

  • cfg-order

  • fib-best-match

workspace_locking_adom

string

the adom to lock for FortiManager running in workspace mode, the value can be global and others including root

workspace_locking_timeout

integer

the maximum time in seconds to wait for other user to release the workspace lock

Default: 300

Notes

Note

  • Running in workspace locking mode is supported in this FortiManager module, the top level parameters workspace_locking_adom and workspace_locking_timeout help do the work.

  • To create or update an object, use state present directive.

  • To delete an object, use state absent directive.

  • Normally, running one module can fail when a non-zero rc is returned. you can also override the conditions to fail or succeed with parameters rc_failed and rc_succeeded

Examples

- hosts: fortimanager-inventory
  collections:
    - fortinet.fortimanager
  connection: httpapi
  vars:
     ansible_httpapi_use_ssl: True
     ansible_httpapi_validate_certs: False
     ansible_httpapi_port: 443
  tasks:
   - name: Configure redundant internet connections using SD-WAN
     fmgr_wanprof_system_sdwan:
        bypass_validation: False
        workspace_locking_adom: <value in [global, custom adom including root]>
        workspace_locking_timeout: 300
        rc_succeeded: [0, -2, -3, ...]
        rc_failed: [-2, -3, ...]
        adom: <your own value>
        wanprof: <your own value>
        wanprof_system_sdwan:
           duplication:
             -
                 dstaddr: <value of string>
                 dstaddr6: <value of string>
                 dstintf: <value of string>
                 id: <value of integer>
                 packet-de-duplication: <value in [disable, enable]>
                 packet-duplication: <value in [disable, force, on-demand]>
                 service: <value of string>
                 srcaddr: <value of string>
                 srcaddr6: <value of string>
                 srcintf: <value of string>
                 service-id: <value of string>
           duplication-max-num: <value of integer>
           fail-detect: <value in [disable, enable]>
           health-check:
             -
                 _dynamic-server: <value of string>
                 addr-mode: <value in [ipv4, ipv6]>
                 diffservcode: <value of string>
                 dns-match-ip: <value of string>
                 dns-request-domain: <value of string>
                 failtime: <value of integer>
                 ftp-file: <value of string>
                 ftp-mode: <value in [passive, port]>
                 ha-priority: <value of integer>
                 http-agent: <value of string>
                 http-get: <value of string>
                 http-match: <value of string>
                 interval: <value of integer>
                 members: <value of string>
                 name: <value of string>
                 packet-size: <value of integer>
                 password: <value of string>
                 port: <value of integer>
                 probe-count: <value of integer>
                 probe-packets: <value in [disable, enable]>
                 probe-timeout: <value of integer>
                 protocol: <value in [ping, tcp-echo, udp-echo, ...]>
                 quality-measured-method: <value in [half-close, half-open]>
                 recoverytime: <value of integer>
                 security-mode: <value in [none, authentication]>
                 server: <value of string>
                 sla:
                   -
                       id: <value of integer>
                       jitter-threshold: <value of integer>
                       latency-threshold: <value of integer>
                       link-cost-factor:
                         - latency
                         - jitter
                         - packet-loss
                       packetloss-threshold: <value of integer>
                 sla-fail-log-period: <value of integer>
                 sla-pass-log-period: <value of integer>
                 system-dns: <value in [disable, enable]>
                 threshold-alert-jitter: <value of integer>
                 threshold-alert-latency: <value of integer>
                 threshold-alert-packetloss: <value of integer>
                 threshold-warning-jitter: <value of integer>
                 threshold-warning-latency: <value of integer>
                 threshold-warning-packetloss: <value of integer>
                 update-cascade-interface: <value in [disable, enable]>
                 update-static-route: <value in [disable, enable]>
                 user: <value of string>
                 detect-mode: <value in [active, passive, prefer-passive]>
           load-balance-mode: <value in [source-ip-based, weight-based, usage-based, ...]>
           members:
             -
                 _dynamic-member: <value of string>
                 comment: <value of string>
                 cost: <value of integer>
                 gateway: <value of string>
                 gateway6: <value of string>
                 ingress-spillover-threshold: <value of integer>
                 interface: <value of string>
                 priority: <value of integer>
                 seq-num: <value of integer>
                 source: <value of string>
                 source6: <value of string>
                 spillover-threshold: <value of integer>
                 status: <value in [disable, enable]>
                 volume-ratio: <value of integer>
                 weight: <value of integer>
                 zone: <value of string>
                 priority6: <value of integer>
           neighbor:
             -
                 health-check: <value of string>
                 ip: <value of string>
                 member: <value of string>
                 role: <value in [primary, secondary, standalone]>
                 sla-id: <value of integer>
           neighbor-hold-boot-time: <value of integer>
           neighbor-hold-down: <value in [disable, enable]>
           neighbor-hold-down-time: <value of integer>
           service:
             -
                 addr-mode: <value in [ipv4, ipv6]>
                 bandwidth-weight: <value of integer>
                 default: <value in [disable, enable]>
                 dscp-forward: <value in [disable, enable]>
                 dscp-forward-tag: <value of string>
                 dscp-reverse: <value in [disable, enable]>
                 dscp-reverse-tag: <value of string>
                 dst: <value of string>
                 dst-negate: <value in [disable, enable]>
                 dst6: <value of string>
                 end-port: <value of integer>
                 gateway: <value in [disable, enable]>
                 groups: <value of string>
                 hash-mode: <value in [round-robin, source-ip-based, source-dest-ip-based, ...]>
                 health-check: <value of string>
                 hold-down-time: <value of integer>
                 id: <value of integer>
                 input-device: <value of string>
                 input-device-negate: <value in [disable, enable]>
                 internet-service: <value in [disable, enable]>
                 internet-service-app-ctrl: <value of integer>
                 internet-service-app-ctrl-group: <value of string>
                 internet-service-custom: <value of string>
                 internet-service-custom-group: <value of string>
                 internet-service-group: <value of string>
                 internet-service-name: <value of string>
                 jitter-weight: <value of integer>
                 latency-weight: <value of integer>
                 link-cost-factor: <value in [latency, jitter, packet-loss, ...]>
                 link-cost-threshold: <value of integer>
                 minimum-sla-meet-members: <value of integer>
                 mode: <value in [auto, manual, priority, ...]>
                 name: <value of string>
                 packet-loss-weight: <value of integer>
                 priority-members: <value of string>
                 protocol: <value of integer>
                 quality-link: <value of integer>
                 role: <value in [primary, secondary, standalone]>
                 route-tag: <value of integer>
                 sla:
                   -
                       health-check: <value of string>
                       id: <value of integer>
                 sla-compare-method: <value in [order, number]>
                 src: <value of string>
                 src-negate: <value in [disable, enable]>
                 src6: <value of string>
                 standalone-action: <value in [disable, enable]>
                 start-port: <value of integer>
                 status: <value in [disable, enable]>
                 tos: <value of string>
                 tos-mask: <value of string>
                 users: <value of string>
                 tie-break: <value in [zone, cfg-order, fib-best-match]>
                 use-shortcut-sla: <value in [disable, enable]>
           status: <value in [disable, enable]>
           zone:
             -
                 name: <value of string>
                 service-sla-tie-break: <value in [cfg-order, fib-best-match]>

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

request_url

string

The full url requested

Returned: always

Sample: “/sys/login/user”

response_code

integer

The status of api request

Returned: always

Sample: 0

response_message

string

The descriptive message of the api response

Returned: always

Sample: “OK.”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Frank Shen (@fshen01)

  • Hongbin Lu (@fgtdev-hblu)