fortinet.fortios.fortios_firewall_policy module – Configure IPv4/IPv6 policies in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_policy.

New in version 2.0.0: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

action

string

the action indiactor to move an object in the list

Choices:

  • move

after

string

mkey of target identifier

before

string

mkey of target identifier

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

firewall_policy

dictionary

Configure IPv4/IPv6 policies.

action

string

Policy action (accept/deny/ipsec).

Choices:

  • accept

  • deny

  • ipsec

anti_replay

string

Enable/disable anti-replay check.

Choices:

  • enable

  • disable

app_category

list / elements=dictionary

Application category ID list.

id

integer / required

Category IDs.

app_group

list / elements=dictionary

Application group names.

name

string / required

Application group names. Source application.group.name.

application

list / elements=dictionary

Application ID list.

id

integer / required

Application IDs.

application_list

string

Name of an existing Application list. Source application.list.name.

auth_cert

string

HTTPS server certificate for policy authentication. Source vpn.certificate.local.name.

auth_path

string

Enable/disable authentication-based routing.

Choices:

  • enable

  • disable

auth_redirect_addr

string

HTTP-to-HTTPS redirect address for firewall authentication.

auto_asic_offload

string

Enable/disable policy traffic ASIC offloading.

Choices:

  • enable

  • disable

av_profile

string

Name of an existing Antivirus profile. Source antivirus.profile.name.

block_notification

string

Enable/disable block notification.

Choices:

  • enable

  • disable

captive_portal_exempt

string

Enable to exempt some users from the captive portal.

Choices:

  • enable

  • disable

capture_packet

string

Enable/disable capture packets.

Choices:

  • enable

  • disable

cifs_profile

string

Name of an existing CIFS profile. Source cifs.profile.name.

comments

string

Comment.

custom_log_fields

list / elements=dictionary

Custom fields to append to log messages for this policy.

field_id

string

Custom log field. Source log.custom-field.id.

decrypted_traffic_mirror

string

Decrypted traffic mirror. Source firewall.decrypted-traffic-mirror.name.

delay_tcp_npu_session

string

Enable TCP NPU session delay to guarantee packet order of 3-way handshake.

Choices:

  • enable

  • disable

devices

list / elements=dictionary

Names of devices or device groups that can be matched by the policy.

name

string / required

Device or group name. Source user.device.alias user.device-group.name user.device-category.name.

diffserv_forward

string

Enable to change packet”s DiffServ values to the specified diffservcode-forward value.

Choices:

  • enable

  • disable

diffserv_reverse

string

Enable to change packet”s reverse (reply) DiffServ values to the specified diffservcode-rev value.

Choices:

  • enable

  • disable

diffservcode_forward

string

Change packet”s DiffServ to this value.

diffservcode_rev

string

Change packet”s reverse (reply) DiffServ to this value.

disclaimer

string

Enable/disable user authentication disclaimer.

Choices:

  • enable

  • disable

dlp_sensor

string

Name of an existing DLP sensor. Source dlp.sensor.name.

dnsfilter_profile

string

Name of an existing DNS filter profile. Source dnsfilter.profile.name.

dscp_match

string

Enable DSCP check.

Choices:

  • enable

  • disable

dscp_negate

string

Enable negated DSCP match.

Choices:

  • enable

  • disable

dscp_value

string

DSCP value.

dsri

string

Enable DSRI to ignore HTTP server responses.

Choices:

  • enable

  • disable

dstaddr

list / elements=dictionary

Destination IPv4 address and address group names.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource .name.

dstaddr6

list / elements=dictionary

Destination IPv6 address name and address group names.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vipgrp6.name firewall.vip6.name system .external-resource.name.

dstaddr_negate

string

When enabled dstaddr/dstaddr6 specifies what the destination address must NOT be.

Choices:

  • enable

  • disable

dstintf

list / elements=dictionary

Outgoing (egress) interface.

name

string / required

Interface name. Source system.interface.name system.zone.name system.sdwan.zone.name.

dynamic_shaping

string

Enable/disable dynamic RADIUS defined traffic shaping.

Choices:

  • enable

  • disable

email_collect

string

Enable/disable email collection.

Choices:

  • enable

  • disable

emailfilter_profile

string

Name of an existing email filter profile. Source emailfilter.profile.name.

fec

string

Enable/disable Forward Error Correction on traffic matching this policy on a FEC device.

Choices:

  • enable

  • disable

file_filter_profile

string

Name of an existing file-filter profile. Source file-filter.profile.name.

firewall_session_dirty

string

How to handle sessions if the configuration of this firewall policy changes.

Choices:

  • check-all

  • check-new

fixedport

string

Enable to prevent source NAT from changing a session”s source port.

Choices:

  • enable

  • disable

fsso

string

Enable/disable Fortinet Single Sign-On.

Choices:

  • enable

  • disable

fsso_agent_for_ntlm

string

FSSO agent to use for NTLM authentication. Source user.fsso.name.

fsso_groups

list / elements=dictionary

Names of FSSO groups.

name

string / required

Names of FSSO groups. Source user.adgrp.name.

geoip_anycast

string

Enable/disable recognition of anycast IP addresses using the geography IP database.

Choices:

  • enable

  • disable

geoip_match

string

Match geography address based either on its physical location or registered location.

Choices:

  • physical-location

  • registered-location

global_label

string

Label for the policy that appears when the GUI is in Global View mode.

groups

list / elements=dictionary

Names of user groups that can authenticate with this policy.

name

string / required

Group name. Source user.group.name.

gtp_profile

string

GTP profile. Source firewall.gtp.name.

http_policy_redirect

string

Redirect HTTP(S) traffic to matching transparent web proxy policy.

Choices:

  • enable

  • disable

icap_profile

string

Name of an existing ICAP profile. Source icap.profile.name.

identity_based_route

string

Name of identity-based routing rule. Source firewall.identity-based-route.name.

inbound

string

Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN.

Choices:

  • enable

  • disable

inspection_mode

string

Policy inspection mode (Flow/proxy). Default is Flow mode.

Choices:

  • proxy

  • flow

internet_service

string

Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.

Choices:

  • enable

  • disable

internet_service_custom

list / elements=dictionary

Custom Internet Service name.

name

string / required

Custom Internet Service name. Source firewall.internet-service-custom.name.

internet_service_custom_group

list / elements=dictionary

Custom Internet Service group name.

name

string / required

Custom Internet Service group name. Source firewall.internet-service-custom-group.name.

internet_service_group

list / elements=dictionary

Internet Service group name.

name

string / required

Internet Service group name. Source firewall.internet-service-group.name.

internet_service_id

list / elements=dictionary

Internet Service ID.

id

integer / required

Internet Service ID. Source firewall.internet-service.id.

internet_service_name

list / elements=dictionary

Internet Service name.

name

string / required

Internet Service name. Source firewall.internet-service-name.name.

internet_service_negate

string

When enabled internet-service specifies what the service must NOT be.

Choices:

  • enable

  • disable

internet_service_src

string

Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used.

Choices:

  • enable

  • disable

internet_service_src_custom

list / elements=dictionary

Custom Internet Service source name.

name

string / required

Custom Internet Service name. Source firewall.internet-service-custom.name.

internet_service_src_custom_group

list / elements=dictionary

Custom Internet Service source group name.

name

string / required

Custom Internet Service group name. Source firewall.internet-service-custom-group.name.

internet_service_src_group

list / elements=dictionary

Internet Service source group name.

name

string / required

Internet Service group name. Source firewall.internet-service-group.name.

internet_service_src_id

list / elements=dictionary

Internet Service source ID.

id

integer / required

Internet Service ID. Source firewall.internet-service.id.

internet_service_src_name

list / elements=dictionary

Internet Service source name.

name

string / required

Internet Service name. Source firewall.internet-service-name.name.

internet_service_src_negate

string

When enabled internet-service-src specifies what the service must NOT be.

Choices:

  • enable

  • disable

ippool

string

Enable to use IP Pools for source NAT.

Choices:

  • enable

  • disable

ips_sensor

string

Name of an existing IPS sensor. Source ips.sensor.name.

label

string

Label for the policy that appears when the GUI is in Section View mode.

learning_mode

string

Enable to allow everything, but log all of the meaningful data for security information gathering. A learning report will be generated.

Choices:

  • enable

  • disable

logtraffic

string

Enable or disable logging. Log all sessions or security profile sessions.

Choices:

  • all

  • utm

  • disable

logtraffic_start

string

Record logs when a session starts.

Choices:

  • enable

  • disable

match_vip

string

Enable to match packets that have had their destination addresses changed by a VIP.

Choices:

  • enable

  • disable

match_vip_only

string

Enable/disable matching of only those packets that have had their destination addresses changed by a VIP.

Choices:

  • enable

  • disable

mms_profile

string

Name of an existing MMS profile. Source firewall.mms-profile.name.

name

string

Policy name.

nat

string

Enable/disable source NAT.

Choices:

  • enable

  • disable

nat46

string

Enable/disable NAT46.

Choices:

  • enable

  • disable

nat64

string

Enable/disable NAT64.

Choices:

  • enable

  • disable

natinbound

string

Policy-based IPsec VPN: apply destination NAT to inbound traffic.

Choices:

  • enable

  • disable

natip

string

Policy-based IPsec VPN: source NAT IP address for outgoing traffic.

natoutbound

string

Policy-based IPsec VPN: apply source NAT to outbound traffic.

Choices:

  • enable

  • disable

np_acceleration

string

Enable/disable UTM Network Processor acceleration.

Choices:

  • enable

  • disable

ntlm

string

Enable/disable NTLM authentication.

Choices:

  • enable

  • disable

ntlm_enabled_browsers

list / elements=dictionary

HTTP-User-Agent value of supported browsers.

user_agent_string

string

User agent string.

ntlm_guest

string

Enable/disable NTLM guest user access.

Choices:

  • enable

  • disable

outbound

string

Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN.

Choices:

  • enable

  • disable

passive_wan_health_measurement

string

Enable/disable passive WAN health measurement. When enabled, auto-asic-offload is disabled.

Choices:

  • enable

  • disable

per_ip_shaper

string

Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name.

permit_any_host

string

Accept UDP packets from any host.

Choices:

  • enable

  • disable

permit_stun_host

string

Accept UDP packets from any Session Traversal Utilities for NAT (STUN) host.

Choices:

  • enable

  • disable

pfcp_profile

string

PFCP profile. Source firewall.pfcp.name.

policyid

integer / required

Policy ID (0 - 4294967294).

poolname

list / elements=dictionary

IP Pool names.

name

string / required

IP pool name. Source firewall.ippool.name.

poolname6

list / elements=dictionary

IPv6 pool names.

name

string / required

IPv6 pool name. Source firewall.ippool6.name.

profile_group

string

Name of profile group. Source firewall.profile-group.name.

profile_protocol_options

string

Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name.

profile_type

string

Determine whether the firewall policy allows security profile groups or single profiles only.

Choices:

  • single

  • group

radius_mac_auth_bypass

string

Enable MAC authentication bypass. The bypassed MAC address must be received from RADIUS server.

Choices:

  • enable

  • disable

redirect_url

string

URL users are directed to after seeing and accepting the disclaimer or authenticating.

replacemsg_override_group

string

Override the default replacement message group for this policy. Source system.replacemsg-group.name.

reputation_direction

string

Direction of the initial traffic for reputation to take effect.

Choices:

  • source

  • destination

reputation_minimum

integer

Minimum Reputation to take action. Source firewall.internet-service-reputation.id.

rsso

string

Enable/disable RADIUS single sign-on (RSSO).

Choices:

  • enable

  • disable

rtp_addr

list / elements=dictionary

Address names if this is an RTP NAT policy.

name

string / required

Address name. Source firewall.internet-service-custom-group.name firewall.addrgrp.name.

rtp_nat

string

Enable Real Time Protocol (RTP) NAT.

Choices:

  • disable

  • enable

scan_botnet_connections

string

Block or monitor connections to Botnet servers or disable Botnet scanning.

Choices:

  • disable

  • block

  • monitor

schedule

string

Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.

schedule_timeout

string

Enable to force current sessions to end when the schedule object times out. Disable allows them to end from inactivity.

Choices:

  • enable

  • disable

sctp_filter_profile

string

Name of an existing SCTP filter profile. Source sctp-filter.profile.name.

send_deny_packet

string

Enable to send a reply when a session is denied or blocked by a firewall policy.

Choices:

  • disable

  • enable

service

list / elements=dictionary

Service and service group names.

name

string / required

Service and service group names. Source firewall.service.custom.name firewall.service.group.name.

service_negate

string

When enabled service specifies what the service must NOT be.

Choices:

  • enable

  • disable

session_ttl

string

TTL in seconds for sessions accepted by this policy (0 means use the system ).

sgt

list / elements=dictionary

Security group tags.

id

integer / required

Security group tag (1 - 65535).

sgt_check

string

Enable/disable security group tags (SGT) check.

Choices:

  • enable

  • disable

spamfilter_profile

string

Name of an existing Spam filter profile. Source spamfilter.profile.name.

src_vendor_mac

list / elements=dictionary

Vendor MAC source ID.

id

integer / required

Vendor MAC ID. Source firewall.vendor-mac.id.

srcaddr

list / elements=dictionary

Source IPv4 address and address group names.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name system.external-resource.name.

srcaddr6

list / elements=dictionary

Source IPv6 address name and address group names.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.

srcaddr_negate

string

When enabled srcaddr/srcaddr6 specifies what the source address must NOT be.

Choices:

  • enable

  • disable

srcintf

list / elements=dictionary

Incoming (ingress) interface.

name

string / required

Interface name. Source system.interface.name system.zone.name system.sdwan.zone.name.

ssh_filter_profile

string

Name of an existing SSH filter profile. Source ssh-filter.profile.name.

ssh_policy_redirect

string

Redirect SSH traffic to matching transparent proxy policy.

Choices:

  • enable

  • disable

ssl_mirror

string

Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring).

Choices:

  • enable

  • disable

ssl_mirror_intf

list / elements=dictionary

SSL mirror interface name.

name

string / required

Mirror Interface name. Source system.interface.name system.zone.name.

ssl_ssh_profile

string

Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name.

status

string

Enable or disable this policy.

Choices:

  • enable

  • disable

tcp_mss_receiver

integer

Receiver TCP maximum segment size (MSS).

tcp_mss_sender

integer

Sender TCP maximum segment size (MSS).

tcp_session_without_syn

string

Enable/disable creation of TCP session without SYN flag.

Choices:

  • all

  • data-only

  • disable

timeout_send_rst

string

Enable/disable sending RST packets when TCP sessions expire.

Choices:

  • enable

  • disable

tos

string

ToS (Type of Service) value used for comparison.

tos_mask

string

Non-zero bit positions are used for comparison while zero bit positions are ignored.

tos_negate

string

Enable negated TOS match.

Choices:

  • enable

  • disable

traffic_shaper

string

Traffic shaper. Source firewall.shaper.traffic-shaper.name.

traffic_shaper_reverse

string

Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.

url_category

list / elements=dictionary

URL category ID list.

id

integer / required

URL category ID.

users

list / elements=dictionary

Names of individual users that can authenticate with this policy.

name

string / required

Names of individual users that can authenticate with this policy. Source user.local.name.

utm_status

string

Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy.

Choices:

  • enable

  • disable

uuid

string

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

videofilter_profile

string

Name of an existing VideoFilter profile. Source videofilter.profile.name.

vlan_cos_fwd

integer

VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest.

vlan_cos_rev

integer

VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest.

vlan_filter

string

Set VLAN filters.

voip_profile

string

Name of an existing VoIP profile. Source voip.profile.name.

vpntunnel

string

Policy-based IPsec VPN: name of the IPsec VPN Phase 1. Source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name.

waf_profile

string

Name of an existing Web application firewall profile. Source waf.profile.name.

wanopt

string

Enable/disable WAN optimization.

Choices:

  • enable

  • disable

wanopt_detection

string

WAN optimization auto-detection mode.

Choices:

  • active

  • passive

  • False

wanopt_passive_opt

string

WAN optimization passive mode options. This option decides what IP address will be used to connect server.

Choices:

  • default

  • transparent

  • non-transparent

wanopt_peer

string

WAN optimization peer. Source wanopt.peer.peer-host-id.

wanopt_profile

string

WAN optimization profile. Source wanopt.profile.name.

wccp

string

Enable/disable forwarding traffic matching this policy to a configured WCCP server.

Choices:

  • enable

  • disable

webcache

string

Enable/disable web cache.

Choices:

  • enable

  • disable

webcache_https

string

Enable/disable web cache for HTTPS.

Choices:

  • disable

  • enable

webfilter_profile

string

Name of an existing Web filter profile. Source webfilter.profile.name.

webproxy_forward_server

string

Webproxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name.

webproxy_profile

string

Webproxy profile name. Source web-proxy.profile.name.

wsso

string

Enable/disable WiFi Single Sign On (WSSO).

Choices:

  • enable

  • disable

ztna_ems_tag

list / elements=dictionary

Source ztna-ems-tag names.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name.

ztna_geo_tag

list / elements=dictionary

Source ztna-geo-tag names.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name.

ztna_status

string

Enable/disable zero trust access.

Choices:

  • enable

  • disable

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

self

string

mkey of self identifier

state

string / required

Indicates whether to create or remove the object.

Choices:

  • present

  • absent

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

  • Adjust object order by moving self after(before) another.

  • Only one of [after, before] must be specified when action is moving an object.

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv4/IPv6 policies.
    fortios_firewall_policy:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_policy:
        action: "accept"
        anti_replay: "enable"
        app_category:
         -
            id:  "6"
        app_group:
         -
            name: "default_name_8 (source application.group.name)"
        application:
         -
            id:  "10"
        application_list: "<your_own_value> (source application.list.name)"
        auth_cert: "<your_own_value> (source vpn.certificate.local.name)"
        auth_path: "enable"
        auth_redirect_addr: "<your_own_value>"
        auto_asic_offload: "enable"
        av_profile: "<your_own_value> (source antivirus.profile.name)"
        block_notification: "enable"
        captive_portal_exempt: "enable"
        capture_packet: "enable"
        cifs_profile: "<your_own_value> (source cifs.profile.name)"
        comments: "<your_own_value>"
        custom_log_fields:
         -
            field_id: "<your_own_value> (source log.custom-field.id)"
        decrypted_traffic_mirror: "<your_own_value> (source firewall.decrypted-traffic-mirror.name)"
        delay_tcp_npu_session: "enable"
        devices:
         -
            name: "default_name_27 (source user.device.alias user.device-group.name user.device-category.name)"
        diffserv_forward: "enable"
        diffserv_reverse: "enable"
        diffservcode_forward: "<your_own_value>"
        diffservcode_rev: "<your_own_value>"
        disclaimer: "enable"
        dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
        dnsfilter_profile: "<your_own_value> (source dnsfilter.profile.name)"
        dscp_match: "enable"
        dscp_negate: "enable"
        dscp_value: "<your_own_value>"
        dsri: "enable"
        dstaddr:
         -
            name: "default_name_40 (source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource.name)"
        dstaddr_negate: "enable"
        dstaddr6:
         -
            name: "default_name_43 (source firewall.address6.name firewall.addrgrp6.name firewall.vipgrp6.name firewall.vip6.name system.external-resource
              .name)"
        dstintf:
         -
            name: "default_name_45 (source system.interface.name system.zone.name system.sdwan.zone.name)"
        dynamic_shaping: "enable"
        email_collect: "enable"
        emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
        fec: "enable"
        file_filter_profile: "<your_own_value> (source file-filter.profile.name)"
        firewall_session_dirty: "check-all"
        fixedport: "enable"
        fsso: "enable"
        fsso_agent_for_ntlm: "<your_own_value> (source user.fsso.name)"
        fsso_groups:
         -
            name: "default_name_56 (source user.adgrp.name)"
        geoip_anycast: "enable"
        geoip_match: "physical-location"
        global_label: "<your_own_value>"
        groups:
         -
            name: "default_name_61 (source user.group.name)"
        gtp_profile: "<your_own_value> (source firewall.gtp.name)"
        http_policy_redirect: "enable"
        icap_profile: "<your_own_value> (source icap.profile.name)"
        identity_based_route: "<your_own_value> (source firewall.identity-based-route.name)"
        inbound: "enable"
        inspection_mode: "proxy"
        internet_service: "enable"
        internet_service_custom:
         -
            name: "default_name_70 (source firewall.internet-service-custom.name)"
        internet_service_custom_group:
         -
            name: "default_name_72 (source firewall.internet-service-custom-group.name)"
        internet_service_group:
         -
            name: "default_name_74 (source firewall.internet-service-group.name)"
        internet_service_id:
         -
            id:  "76 (source firewall.internet-service.id)"
        internet_service_name:
         -
            name: "default_name_78 (source firewall.internet-service-name.name)"
        internet_service_negate: "enable"
        internet_service_src: "enable"
        internet_service_src_custom:
         -
            name: "default_name_82 (source firewall.internet-service-custom.name)"
        internet_service_src_custom_group:
         -
            name: "default_name_84 (source firewall.internet-service-custom-group.name)"
        internet_service_src_group:
         -
            name: "default_name_86 (source firewall.internet-service-group.name)"
        internet_service_src_id:
         -
            id:  "88 (source firewall.internet-service.id)"
        internet_service_src_name:
         -
            name: "default_name_90 (source firewall.internet-service-name.name)"
        internet_service_src_negate: "enable"
        ippool: "enable"
        ips_sensor: "<your_own_value> (source ips.sensor.name)"
        label: "<your_own_value>"
        learning_mode: "enable"
        logtraffic: "all"
        logtraffic_start: "enable"
        match_vip: "enable"
        match_vip_only: "enable"
        mms_profile: "<your_own_value> (source firewall.mms-profile.name)"
        name: "default_name_101"
        nat: "enable"
        nat46: "enable"
        nat64: "enable"
        natinbound: "enable"
        natip: "<your_own_value>"
        natoutbound: "enable"
        np_acceleration: "enable"
        ntlm: "enable"
        ntlm_enabled_browsers:
         -
            user_agent_string: "<your_own_value>"
        ntlm_guest: "enable"
        outbound: "enable"
        passive_wan_health_measurement: "enable"
        per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
        permit_any_host: "enable"
        permit_stun_host: "enable"
        pfcp_profile: "<your_own_value> (source firewall.pfcp.name)"
        policyid: "119"
        poolname:
         -
            name: "default_name_121 (source firewall.ippool.name)"
        poolname6:
         -
            name: "default_name_123 (source firewall.ippool6.name)"
        profile_group: "<your_own_value> (source firewall.profile-group.name)"
        profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
        profile_type: "single"
        radius_mac_auth_bypass: "enable"
        redirect_url: "<your_own_value>"
        replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)"
        reputation_direction: "source"
        reputation_minimum: "131 (source firewall.internet-service-reputation.id)"
        rsso: "enable"
        rtp_addr:
         -
            name: "default_name_134 (source firewall.internet-service-custom-group.name firewall.addrgrp.name)"
        rtp_nat: "disable"
        scan_botnet_connections: "disable"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        schedule_timeout: "enable"
        sctp_filter_profile: "<your_own_value> (source sctp-filter.profile.name)"
        send_deny_packet: "disable"
        service:
         -
            name: "default_name_142 (source firewall.service.custom.name firewall.service.group.name)"
        service_negate: "enable"
        session_ttl: "<your_own_value>"
        sgt:
         -
            id:  "146"
        sgt_check: "enable"
        spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
        src_vendor_mac:
         -
            id:  "150 (source firewall.vendor-mac.id)"
        srcaddr:
         -
            name: "default_name_152 (source firewall.address.name firewall.addrgrp.name system.external-resource.name)"
        srcaddr_negate: "enable"
        srcaddr6:
         -
            name: "default_name_155 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
        srcintf:
         -
            name: "default_name_157 (source system.interface.name system.zone.name system.sdwan.zone.name)"
        ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
        ssh_policy_redirect: "enable"
        ssl_mirror: "enable"
        ssl_mirror_intf:
         -
            name: "default_name_162 (source system.interface.name system.zone.name)"
        ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
        status: "enable"
        tcp_mss_receiver: "165"
        tcp_mss_sender: "166"
        tcp_session_without_syn: "all"
        timeout_send_rst: "enable"
        tos: "<your_own_value>"
        tos_mask: "<your_own_value>"
        tos_negate: "enable"
        traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        url_category:
         -
            id:  "175"
        users:
         -
            name: "default_name_177 (source user.local.name)"
        utm_status: "enable"
        uuid: "<your_own_value>"
        videofilter_profile: "<your_own_value> (source videofilter.profile.name)"
        vlan_cos_fwd: "181"
        vlan_cos_rev: "182"
        vlan_filter: "<your_own_value>"
        voip_profile: "<your_own_value> (source voip.profile.name)"
        vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)"
        waf_profile: "<your_own_value> (source waf.profile.name)"
        wanopt: "enable"
        wanopt_detection: "active"
        wanopt_passive_opt: "default"
        wanopt_peer: "<your_own_value> (source wanopt.peer.peer-host-id)"
        wanopt_profile: "<your_own_value> (source wanopt.profile.name)"
        wccp: "enable"
        webcache: "enable"
        webcache_https: "disable"
        webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
        webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
        webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"
        wsso: "enable"
        ztna_ems_tag:
         -
            name: "default_name_200 (source firewall.address.name firewall.addrgrp.name)"
        ztna_geo_tag:
         -
            name: "default_name_202 (source firewall.address.name firewall.addrgrp.name)"
        ztna_status: "enable"

  - name: move firewall.policy
    fortios_firewall_policy:
      vdom:  "root"
      action: "move"
      self: "<mkey of self identifier>"
      after: "<mkey of target identifier>"
     #before: "<mkey of target identifier>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)