You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

fortinet.fortios.fortios_firewall_vip6 module – Configure virtual IP for IPv6 in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_vip6.

New in version 2.0.0: of fortinet.fortios

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and vip6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

• ansible>=2.9.0

Parameters

Parameter	Comments
access_token string	Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean	Enable/Disable logging for task. Choices: no ← (default) yes
firewall_vip6 dictionary	Configure virtual IP for IPv6.
add_nat64_route string	Enable/disable adding NAT64 route. Choices: disable enable
arp_reply string	Enable to respond to ARP requests for this virtual IP address. Enabled by default. Choices: disable enable
color integer	Color of icon on the GUI.
comment string	Comment.
embedded_ipv4_address string	Enable/disable use of the lower 32 bits of the external IPv6 address as mapped IPv4 address. Choices: disable enable
extip string	IPv6 address or address range on the external interface that you want to map to an address or address range on the destination network.
extport string	Incoming port number range that you want to map to a port number range on the destination network.
http_cookie_age integer	Time in minutes that client web browsers should keep a cookie. Default is 60 minutes. 0 = no time limit.
http_cookie_domain string	Domain that HTTP cookie persistence should apply to.
http_cookie_domain_from_host string	Enable/disable use of HTTP cookie domain from host field in HTTP. Choices: disable enable
http_cookie_generation integer	Generation of HTTP cookie to be accepted. Changing invalidates all existing cookies.
http_cookie_path string	Limit HTTP cookie persistence to the specified path.
http_cookie_share string	Control sharing of cookies across virtual servers. Use of same-ip means a cookie from one virtual server can be used by another. Disable stops cookie sharing. Choices: disable same-ip
http_ip_header string	For HTTP multiplexing, enable to add the original client IP address in the XForwarded-For HTTP header. Choices: enable disable
http_ip_header_name string	For HTTP multiplexing, enter a custom HTTPS header name. The original client IP address is added to this header. If empty, X-Forwarded-For is used.
http_multiplex string	Enable/disable HTTP multiplexing. Choices: enable disable
http_redirect string	Enable/disable redirection of HTTP to HTTPS. Choices: enable disable
https_cookie_secure string	Enable/disable verification that inserted HTTPS cookies are secure. Choices: disable enable
id integer	Custom defined ID.
ipv4_mappedip string	Range of mapped IP addresses. Specify the start IP address followed by a space and the end IP address.
ipv4_mappedport string	IPv4 port number range on the destination network to which the external port number range is mapped.
ldb_method string	Method used to distribute sessions to real servers. Choices: static round-robin weighted least-session least-rtt first-alive http-host
mappedip string	Mapped IPv6 address range in the format startIP-endIP.
mappedport string	Port number range on the destination network to which the external port number range is mapped.
max_embryonic_connections integer	Maximum number of incomplete connections.
monitor list / elements=dictionary	Name of the health check monitor to use when polling to determine a virtual server”s connectivity status.
name string / required	Health monitor name. Source firewall.ldb-monitor.name.
name string / required	Virtual ip6 name.
nat64 string	Enable/disable DNAT64. Choices: disable enable
nat66 string	Enable/disable DNAT66. Choices: disable enable
nat_source_vip string	Enable to perform SNAT on traffic from mappedip to the extip for all egress interfaces. Choices: disable enable
outlook_web_access string	Enable to add the Front-End-Https header for Microsoft Outlook Web Access. Choices: disable enable
persistence string	Configure how to make sure that clients connect to the same server every time they make a request that is part of the same session. Choices: none http-cookie ssl-session-id
portforward string	Enable port forwarding. Choices: disable enable
protocol string	Protocol to use when forwarding packets. Choices: tcp udp sctp
realservers list / elements=dictionary	Select the real servers that this server load balancing VIP will distribute traffic to.
client_ip string	Only clients in this IP range can connect to this real server.
healthcheck string	Enable to check the responsiveness of the real server before forwarding traffic. Choices: disable enable vip
holddown_interval integer	Time in seconds that the health check monitor continues to monitor an unresponsive server that should be active.
http_host string	HTTP server domain name in HTTP header.
id integer / required	Real server ID.
ip string	IP address of the real server.
max_connections integer	Max number of active connections that can directed to the real server. When reached, sessions are sent to other real servers.
monitor string	Name of the health check monitor to use when polling to determine a virtual server”s connectivity status. Source firewall .ldb-monitor.name.
name string / required	Health monitor name. Source firewall.ldb-monitor.name.
port integer	Port for communicating with the real server. Required if port forwarding is enabled.
status string	Set the status of the real server to active so that it can accept traffic, or on standby or disabled so no traffic is sent. Choices: active standby disable
weight integer	Weight of the real server. If weighted load balancing is enabled, the server with the highest weight gets more connections.
server_type string	Protocol to be load balanced by the virtual server (also called the server load balance virtual IP). Choices: http https imaps pop3s smtps ssl tcp udp ip
src_filter list / elements=dictionary	Source IP6 filter (x:x:x:x:x:x:x:x/x). Separate addresses with spaces.
range string / required	Source-filter range.
ssl_accept_ffdhe_groups string	Enable/disable FFDHE cipher suite for SSL key exchange. Choices: enable disable
ssl_algorithm string	Permitted encryption algorithms for SSL sessions according to encryption strength. Choices: high medium low custom
ssl_certificate string	The name of the certificate to use for SSL handshake. Source vpn.certificate.local.name.
ssl_cipher_suites list / elements=dictionary	SSL/TLS cipher suites acceptable from a client, ordered by priority.
cipher string	Cipher suite name. Choices: TLS-AES-128-GCM-SHA256 TLS-AES-256-GCM-SHA384 TLS-CHACHA20-POLY1305-SHA256 TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-AES-128-CBC-SHA TLS-DHE-RSA-WITH-AES-256-CBC-SHA TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 TLS-DHE-DSS-WITH-AES-128-CBC-SHA TLS-DHE-DSS-WITH-AES-256-CBC-SHA TLS-DHE-DSS-WITH-AES-128-CBC-SHA256 TLS-DHE-DSS-WITH-AES-128-GCM-SHA256 TLS-DHE-DSS-WITH-AES-256-CBC-SHA256 TLS-DHE-DSS-WITH-AES-256-GCM-SHA384 TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-AES-128-CBC-SHA TLS-RSA-WITH-AES-256-CBC-SHA TLS-RSA-WITH-AES-128-CBC-SHA256 TLS-RSA-WITH-AES-128-GCM-SHA256 TLS-RSA-WITH-AES-256-CBC-SHA256 TLS-RSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-SEED-CBC-SHA TLS-DHE-DSS-WITH-SEED-CBC-SHA TLS-DHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-DHE-DSS-WITH-ARIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-ARIA-256-CBC-SHA384 TLS-RSA-WITH-SEED-CBC-SHA TLS-RSA-WITH-ARIA-128-CBC-SHA256 TLS-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-RC4-128-SHA TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-DSS-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-RC4-128-MD5 TLS-RSA-WITH-RC4-128-SHA TLS-DHE-RSA-WITH-DES-CBC-SHA TLS-DHE-DSS-WITH-DES-CBC-SHA TLS-RSA-WITH-DES-CBC-SHA
priority integer / required	SSL/TLS cipher suites priority.
versions string	SSL/TLS versions that the cipher suite can be used with. Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3
ssl_client_fallback string	Enable/disable support for preventing Downgrade Attacks on client connections (RFC 7507). Choices: disable enable
ssl_client_rekey_count integer	Maximum length of data in MB before triggering a client rekey (0 = disable).
ssl_client_renegotiation string	Allow, deny, or require secure renegotiation of client sessions to comply with RFC 5746. Choices: allow deny secure
ssl_client_session_state_max integer	Maximum number of client to FortiGate SSL session states to keep.
ssl_client_session_state_timeout integer	Number of minutes to keep client to FortiGate SSL session state.
ssl_client_session_state_type string	How to expire SSL sessions for the segment of the SSL connection between the client and the FortiGate. Choices: disable time count both
ssl_dh_bits string	Number of bits to use in the Diffie-Hellman exchange for RSA encryption of SSL sessions. Choices: 768 1024 1536 2048 3072 4096
ssl_hpkp string	Enable/disable including HPKP header in response. Choices: disable enable report-only
ssl_hpkp_age integer	Number of minutes the web browser should keep HPKP.
ssl_hpkp_backup string	Certificate to generate backup HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name.
ssl_hpkp_include_subdomains string	Indicate that HPKP header applies to all subdomains. Choices: disable enable
ssl_hpkp_primary string	Certificate to generate primary HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name.
ssl_hpkp_report_uri string	URL to report HPKP violations to.
ssl_hsts string	Enable/disable including HSTS header in response. Choices: disable enable
ssl_hsts_age integer	Number of seconds the client should honor the HSTS setting.
ssl_hsts_include_subdomains string	Indicate that HSTS header applies to all subdomains. Choices: disable enable
ssl_http_location_conversion string	Enable to replace HTTP with HTTPS in the reply”s Location HTTP header field. Choices: enable disable
ssl_http_match_host string	Enable/disable HTTP host matching for location conversion. Choices: enable disable
ssl_max_version string	Highest SSL/TLS version acceptable from a client. Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3
ssl_min_version string	Lowest SSL/TLS version acceptable from a client. Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3
ssl_mode string	Apply SSL offloading between the client and the FortiGate (half) or from the client to the FortiGate and from the FortiGate to the server (full). Choices: half full
ssl_pfs string	Select the cipher suites that can be used for SSL perfect forward secrecy (PFS). Applies to both client and server sessions. Choices: require deny allow
ssl_send_empty_frags string	Enable/disable sending empty fragments to avoid CBC IV attacks (SSL 3.0 & TLS 1.0 only). May need to be disabled for compatibility with older systems. Choices: enable disable
ssl_server_algorithm string	Permitted encryption algorithms for the server side of SSL full mode sessions according to encryption strength. Choices: high medium low custom client
ssl_server_cipher_suites list / elements=dictionary	SSL/TLS cipher suites to offer to a server, ordered by priority.
cipher string	Cipher suite name. Choices: TLS-AES-128-GCM-SHA256 TLS-AES-256-GCM-SHA384 TLS-CHACHA20-POLY1305-SHA256 TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-AES-128-CBC-SHA TLS-DHE-RSA-WITH-AES-256-CBC-SHA TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 TLS-DHE-DSS-WITH-AES-128-CBC-SHA TLS-DHE-DSS-WITH-AES-256-CBC-SHA TLS-DHE-DSS-WITH-AES-128-CBC-SHA256 TLS-DHE-DSS-WITH-AES-128-GCM-SHA256 TLS-DHE-DSS-WITH-AES-256-CBC-SHA256 TLS-DHE-DSS-WITH-AES-256-GCM-SHA384 TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-AES-128-CBC-SHA TLS-RSA-WITH-AES-256-CBC-SHA TLS-RSA-WITH-AES-128-CBC-SHA256 TLS-RSA-WITH-AES-128-GCM-SHA256 TLS-RSA-WITH-AES-256-CBC-SHA256 TLS-RSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-SEED-CBC-SHA TLS-DHE-DSS-WITH-SEED-CBC-SHA TLS-DHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-DHE-DSS-WITH-ARIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-ARIA-256-CBC-SHA384 TLS-RSA-WITH-SEED-CBC-SHA TLS-RSA-WITH-ARIA-128-CBC-SHA256 TLS-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-RC4-128-SHA TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-DSS-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-RC4-128-MD5 TLS-RSA-WITH-RC4-128-SHA TLS-DHE-RSA-WITH-DES-CBC-SHA TLS-DHE-DSS-WITH-DES-CBC-SHA TLS-RSA-WITH-DES-CBC-SHA
priority integer / required	SSL/TLS cipher suites priority.
versions string	SSL/TLS versions that the cipher suite can be used with. Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3
ssl_server_max_version string	Highest SSL/TLS version acceptable from a server. Use the client setting by default. Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3 client
ssl_server_min_version string	Lowest SSL/TLS version acceptable from a server. Use the client setting by default. Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3 client
ssl_server_session_state_max integer	Maximum number of FortiGate to Server SSL session states to keep.
ssl_server_session_state_timeout integer	Number of minutes to keep FortiGate to Server SSL session state.
ssl_server_session_state_type string	How to expire SSL sessions for the segment of the SSL connection between the server and the FortiGate. Choices: disable time count both
type string	Configure a static NAT server load balance VIP or access proxy. Choices: static-nat server-load-balance access-proxy
uuid string	Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
weblogic_server string	Enable to add an HTTP header to indicate SSL offloading for a WebLogic server. Choices: disable enable
websphere_server string	Enable to add an HTTP header to indicate SSL offloading for a WebSphere server. Choices: disable enable
member_path string	Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation.
member_state string	Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices: present absent
state string / required	Indicates whether to create or remove the object. Choices: present absent
vdom string	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: “root”

Notes

Note

• Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure virtual IP for IPv6.
    fortios_firewall_vip6:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_vip6:
        add_nat64_route: "disable"
        arp_reply: "disable"
        color: "5"
        comment: "Comment."
        embedded_ipv4_address: "disable"
        extip: "<your_own_value>"
        extport: "<your_own_value>"
        http_cookie_age: "10"
        http_cookie_domain: "<your_own_value>"
        http_cookie_domain_from_host: "disable"
        http_cookie_generation: "13"
        http_cookie_path: "<your_own_value>"
        http_cookie_share: "disable"
        http_ip_header: "enable"
        http_ip_header_name: "<your_own_value>"
        http_multiplex: "enable"
        http_redirect: "enable"
        https_cookie_secure: "disable"
        id:  "21"
        ipv4_mappedip: "<your_own_value>"
        ipv4_mappedport: "<your_own_value>"
        ldb_method: "static"
        mappedip: "<your_own_value>"
        mappedport: "<your_own_value>"
        max_embryonic_connections: "27"
        monitor:
         -
            name: "default_name_29 (source firewall.ldb-monitor.name)"
        name: "default_name_30"
        nat_source_vip: "disable"
        nat64: "disable"
        nat66: "disable"
        outlook_web_access: "disable"
        persistence: "none"
        portforward: "disable"
        protocol: "tcp"
        realservers:
         -
            client_ip: "<your_own_value>"
            healthcheck: "disable"
            holddown_interval: "41"
            http_host: "myhostname"
            id:  "43"
            ip: "<your_own_value>"
            max_connections: "45"
            monitor:
             -
                name: "default_name_47 (source firewall.ldb-monitor.name)"
            port: "48"
            status: "active"
            weight: "50"
        server_type: "http"
        src_filter:
         -
            range: "<your_own_value>"
        ssl_accept_ffdhe_groups: "enable"
        ssl_algorithm: "high"
        ssl_certificate: "<your_own_value> (source vpn.certificate.local.name)"
        ssl_cipher_suites:
         -
            cipher: "TLS-AES-128-GCM-SHA256"
            priority: "59"
            versions: "ssl-3.0"
        ssl_client_fallback: "disable"
        ssl_client_rekey_count: "62"
        ssl_client_renegotiation: "allow"
        ssl_client_session_state_max: "64"
        ssl_client_session_state_timeout: "65"
        ssl_client_session_state_type: "disable"
        ssl_dh_bits: "768"
        ssl_hpkp: "disable"
        ssl_hpkp_age: "69"
        ssl_hpkp_backup: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)"
        ssl_hpkp_include_subdomains: "disable"
        ssl_hpkp_primary: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)"
        ssl_hpkp_report_uri: "<your_own_value>"
        ssl_hsts: "disable"
        ssl_hsts_age: "75"
        ssl_hsts_include_subdomains: "disable"
        ssl_http_location_conversion: "enable"
        ssl_http_match_host: "enable"
        ssl_max_version: "ssl-3.0"
        ssl_min_version: "ssl-3.0"
        ssl_mode: "half"
        ssl_pfs: "require"
        ssl_send_empty_frags: "enable"
        ssl_server_algorithm: "high"
        ssl_server_cipher_suites:
         -
            cipher: "TLS-AES-128-GCM-SHA256"
            priority: "87"
            versions: "ssl-3.0"
        ssl_server_max_version: "ssl-3.0"
        ssl_server_min_version: "ssl-3.0"
        ssl_server_session_state_max: "91"
        ssl_server_session_state_timeout: "92"
        ssl_server_session_state_type: "disable"
        type: "static-nat"
        uuid: "<your_own_value>"
        weblogic_server: "disable"
        websphere_server: "disable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
build string	Build number of the fortigate image Returned: always Sample: “1547”
http_method string	Last method used to provision the content into FortiGate Returned: always Sample: “PUT”
http_status string	Last result given by FortiGate on last operation applied Returned: always Sample: “200”
mkey string	Master key (id) used in the last call to FortiGate Returned: success Sample: “id”
name string	Name of the table used to fulfill the request Returned: always Sample: “urlfilter”
path string	Path of the table used to fulfill the request Returned: always Sample: “webfilter”
revision string	Internal revision number Returned: always Sample: “17.0.2.10658”
serial string	Serial number of the unit Returned: always Sample: “FGVMEVYYQT3AB5352”
status string	Indication of the operation’s result Returned: always Sample: “success”
vdom string	Virtual domain used Returned: always Sample: “root”
version string	Version of the FortiGate Returned: always Sample: “v5.6.3”

Authors

• Link Zheng (@chillancezen)

• Jie Xue (@JieX19)

• Hongbin Lu (@fgtdev-hblu)

• Frank Shen (@frankshen01)

• Miguel Angel Munoz (@mamunozgonzalez)

• Nicolas Thomas (@thomnico)

Collection links

Issue Tracker Homepage Repository (Sources)