fortinet.fortios.fortios_router_isis module – Configure IS-IS in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_isis.

New in version 2.0.0: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and isis category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

router_isis

dictionary

Configure IS-IS.

adjacency_check

string

Enable/disable adjacency check.

Choices:

  • enable

  • disable

adjacency_check6

string

Enable/disable IPv6 adjacency check.

Choices:

  • enable

  • disable

adv_passive_only

string

Enable/disable IS-IS advertisement of passive interfaces only.

Choices:

  • enable

  • disable

adv_passive_only6

string

Enable/disable IPv6 IS-IS advertisement of passive interfaces only.

Choices:

  • enable

  • disable

auth_keychain_l1

string

Authentication key-chain for level 1 PDUs. Source router.key-chain.name.

auth_keychain_l2

string

Authentication key-chain for level 2 PDUs. Source router.key-chain.name.

auth_mode_l1

string

Level 1 authentication mode.

Choices:

  • password

  • md5

auth_mode_l2

string

Level 2 authentication mode.

Choices:

  • password

  • md5

auth_password_l1

string

Authentication password for level 1 PDUs.

auth_password_l2

string

Authentication password for level 2 PDUs.

auth_sendonly_l1

string

Enable/disable level 1 authentication send-only.

Choices:

  • enable

  • disable

auth_sendonly_l2

string

Enable/disable level 2 authentication send-only.

Choices:

  • enable

  • disable

default_originate

string

Enable/disable distribution of default route information.

Choices:

  • enable

  • disable

default_originate6

string

Enable/disable distribution of default IPv6 route information.

Choices:

  • enable

  • disable

dynamic_hostname

string

Enable/disable dynamic hostname.

Choices:

  • enable

  • disable

ignore_lsp_errors

string

Enable/disable ignoring of LSP errors with bad checksums.

Choices:

  • enable

  • disable

is_type

string

IS type.

Choices:

  • level-1-2

  • level-1

  • level-2-only

isis_interface

list / elements=dictionary

IS-IS interface configuration.

auth_keychain_l1

string

Authentication key-chain for level 1 PDUs. Source router.key-chain.name.

auth_keychain_l2

string

Authentication key-chain for level 2 PDUs. Source router.key-chain.name.

auth_mode_l1

string

Level 1 authentication mode.

Choices:

  • md5

  • password

auth_mode_l2

string

Level 2 authentication mode.

Choices:

  • md5

  • password

auth_password_l1

string

Authentication password for level 1 PDUs.

auth_password_l2

string

Authentication password for level 2 PDUs.

auth_send_only_l1

string

Enable/disable authentication send-only for level 1 PDUs.

Choices:

  • enable

  • disable

auth_send_only_l2

string

Enable/disable authentication send-only for level 2 PDUs.

Choices:

  • enable

  • disable

circuit_type

string

IS-IS interface”s circuit type.

Choices:

  • level-1-2

  • level-1

  • level-2

csnp_interval_l1

integer

Level 1 CSNP interval.

csnp_interval_l2

integer

Level 2 CSNP interval.

hello_interval_l1

integer

Level 1 hello interval.

hello_interval_l2

integer

Level 2 hello interval.

hello_multiplier_l1

integer

Level 1 multiplier for Hello holding time.

hello_multiplier_l2

integer

Level 2 multiplier for Hello holding time.

hello_padding

string

Enable/disable padding to IS-IS hello packets.

Choices:

  • enable

  • disable

lsp_interval

integer

LSP transmission interval (milliseconds).

lsp_retransmit_interval

integer

LSP retransmission interval (sec).

mesh_group

string

Enable/disable IS-IS mesh group.

Choices:

  • enable

  • disable

mesh_group_id

integer

Mesh group ID <0-4294967295>, 0: mesh-group blocked.

metric_l1

integer

Level 1 metric for interface.

metric_l2

integer

Level 2 metric for interface.

name

string / required

IS-IS interface name. Source system.interface.name.

network_type

string

IS-IS interface”s network type.

Choices:

  • broadcast

  • point-to-point

  • loopback

priority_l1

integer

Level 1 priority.

priority_l2

integer

Level 2 priority.

status

string

Enable/disable interface for IS-IS.

Choices:

  • enable

  • disable

status6

string

Enable/disable IPv6 interface for IS-IS.

Choices:

  • enable

  • disable

wide_metric_l1

integer

Level 1 wide metric for interface.

wide_metric_l2

integer

Level 2 wide metric for interface.

isis_net

list / elements=dictionary

IS-IS net configuration.

id

integer / required

ISIS network ID.

net

string

IS-IS networks (format = xx.xxxx. .xxxx.xx.).

lsp_gen_interval_l1

integer

Minimum interval for level 1 LSP regenerating.

lsp_gen_interval_l2

integer

Minimum interval for level 2 LSP regenerating.

lsp_refresh_interval

integer

LSP refresh time in seconds.

max_lsp_lifetime

integer

Maximum LSP lifetime in seconds.

metric_style

string

Use old-style (ISO 10589) or new-style packet formats.

Choices:

  • narrow

  • wide

  • transition

  • narrow-transition

  • narrow-transition-l1

  • narrow-transition-l2

  • wide-l1

  • wide-l2

  • wide-transition

  • wide-transition-l1

  • wide-transition-l2

  • transition-l1

  • transition-l2

overload_bit

string

Enable/disable signal other routers not to use us in SPF.

Choices:

  • enable

  • disable

overload_bit_on_startup

integer

Overload-bit only temporarily after reboot.

overload_bit_suppress

list / elements=string

Suppress overload-bit for the specific prefixes.

Choices:

  • external

  • interlevel

redistribute

list / elements=dictionary

IS-IS redistribute protocols.

level

string

Level.

Choices:

  • level-1-2

  • level-1

  • level-2

metric

integer

Metric.

metric_type

string

Metric type.

Choices:

  • external

  • internal

protocol

string / required

Protocol name.

routemap

string

Route map name. Source router.route-map.name.

status

string

Status.

Choices:

  • enable

  • disable

redistribute6

list / elements=dictionary

IS-IS IPv6 redistribution for routing protocols.

level

string

Level.

Choices:

  • level-1-2

  • level-1

  • level-2

metric

integer

Metric.

metric_type

string

Metric type.

Choices:

  • external

  • internal

protocol

string / required

Protocol name.

routemap

string

Route map name. Source router.route-map.name.

status

string

Enable/disable redistribution.

Choices:

  • enable

  • disable

redistribute6_l1

string

Enable/disable redistribution of level 1 IPv6 routes into level 2.

Choices:

  • enable

  • disable

redistribute6_l1_list

string

Access-list for IPv6 route redistribution from l1 to l2. Source router.access-list6.name.

redistribute6_l2

string

Enable/disable redistribution of level 2 IPv6 routes into level 1.

Choices:

  • enable

  • disable

redistribute6_l2_list

string

Access-list for IPv6 route redistribution from l2 to l1. Source router.access-list6.name.

redistribute_l1

string

Enable/disable redistribution of level 1 routes into level 2.

Choices:

  • enable

  • disable

redistribute_l1_list

string

Access-list for route redistribution from l1 to l2. Source router.access-list.name.

redistribute_l2

string

Enable/disable redistribution of level 2 routes into level 1.

Choices:

  • enable

  • disable

redistribute_l2_list

string

Access-list for route redistribution from l2 to l1. Source router.access-list.name.

spf_interval_exp_l1

string

Level 1 SPF calculation delay.

spf_interval_exp_l2

string

Level 2 SPF calculation delay.

summary_address

list / elements=dictionary

IS-IS summary addresses.

id

integer / required

Summary address entry ID.

level

string

Level.

Choices:

  • level-1-2

  • level-1

  • level-2

prefix

string

Prefix.

summary_address6

list / elements=dictionary

IS-IS IPv6 summary address.

id

integer / required

Prefix entry ID.

level

string

Level.

Choices:

  • level-1-2

  • level-1

  • level-2

prefix6

string

IPv6 prefix.

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IS-IS.
    fortios_router_isis:
      vdom:  "{{ vdom }}"
      router_isis:
        adjacency_check: "enable"
        adjacency_check6: "enable"
        adv_passive_only: "enable"
        adv_passive_only6: "enable"
        auth_keychain_l1: "<your_own_value> (source router.key-chain.name)"
        auth_keychain_l2: "<your_own_value> (source router.key-chain.name)"
        auth_mode_l1: "password"
        auth_mode_l2: "password"
        auth_password_l1: "<your_own_value>"
        auth_password_l2: "<your_own_value>"
        auth_sendonly_l1: "enable"
        auth_sendonly_l2: "enable"
        default_originate: "enable"
        default_originate6: "enable"
        dynamic_hostname: "enable"
        ignore_lsp_errors: "enable"
        is_type: "level-1-2"
        isis_interface:
         -
            auth_keychain_l1: "<your_own_value> (source router.key-chain.name)"
            auth_keychain_l2: "<your_own_value> (source router.key-chain.name)"
            auth_mode_l1: "md5"
            auth_mode_l2: "md5"
            auth_password_l1: "<your_own_value>"
            auth_password_l2: "<your_own_value>"
            auth_send_only_l1: "enable"
            auth_send_only_l2: "enable"
            circuit_type: "level-1-2"
            csnp_interval_l1: "30"
            csnp_interval_l2: "31"
            hello_interval_l1: "32"
            hello_interval_l2: "33"
            hello_multiplier_l1: "34"
            hello_multiplier_l2: "35"
            hello_padding: "enable"
            lsp_interval: "37"
            lsp_retransmit_interval: "38"
            mesh_group: "enable"
            mesh_group_id: "40"
            metric_l1: "41"
            metric_l2: "42"
            name: "default_name_43 (source system.interface.name)"
            network_type: "broadcast"
            priority_l1: "45"
            priority_l2: "46"
            status: "enable"
            status6: "enable"
            wide_metric_l1: "49"
            wide_metric_l2: "50"
        isis_net:
         -
            id:  "52"
            net: "<your_own_value>"
        lsp_gen_interval_l1: "54"
        lsp_gen_interval_l2: "55"
        lsp_refresh_interval: "56"
        max_lsp_lifetime: "57"
        metric_style: "narrow"
        overload_bit: "enable"
        overload_bit_on_startup: "60"
        overload_bit_suppress: "external"
        redistribute:
         -
            level: "level-1-2"
            metric: "64"
            metric_type: "external"
            protocol: "<your_own_value>"
            routemap: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        redistribute_l1: "enable"
        redistribute_l1_list: "<your_own_value> (source router.access-list.name)"
        redistribute_l2: "enable"
        redistribute_l2_list: "<your_own_value> (source router.access-list.name)"
        redistribute6:
         -
            level: "level-1-2"
            metric: "75"
            metric_type: "external"
            protocol: "<your_own_value>"
            routemap: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        redistribute6_l1: "enable"
        redistribute6_l1_list: "<your_own_value> (source router.access-list6.name)"
        redistribute6_l2: "enable"
        redistribute6_l2_list: "<your_own_value> (source router.access-list6.name)"
        spf_interval_exp_l1: "<your_own_value>"
        spf_interval_exp_l2: "<your_own_value>"
        summary_address:
         -
            id:  "87"
            level: "level-1-2"
            prefix: "<your_own_value>"
        summary_address6:
         -
            id:  "91"
            level: "level-1-2"
            prefix6: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)