fortinet.fortios.fortios_router_multicast module – Configure router multicast in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_multicast.

New in version 2.0.0: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and multicast category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

router_multicast

dictionary

Configure router multicast.

interface

list / elements=dictionary

PIM interfaces.

bfd

string

Enable/disable Protocol Independent Multicast (PIM) Bidirectional Forwarding Detection (BFD).

Choices:

  • enable

  • disable

cisco_exclude_genid

string

Exclude GenID from hello packets (compatibility with old Cisco IOS).

Choices:

  • enable

  • disable

dr_priority

integer

DR election priority.

hello_holdtime

integer

Time before old neighbor information expires (0 - 65535 sec).

hello_interval

integer

Interval between sending PIM hello messages (0 - 65535 sec).

igmp

dictionary

IGMP configuration options.

access_group

string

Groups IGMP hosts are allowed to join. Source router.access-list.name.

immediate_leave_group

string

Groups to drop membership for immediately after receiving IGMPv2 leave. Source router.access-list.name.

last_member_query_count

integer

Number of group specific queries before removing group (2 - 7).

last_member_query_interval

integer

Timeout between IGMPv2 leave and removing group (1 - 65535 msec).

query_interval

integer

Interval between queries to IGMP hosts (1 - 65535 sec).

query_max_response_time

integer

Maximum time to wait for a IGMP query response (1 - 25 sec).

query_timeout

integer

Timeout between queries before becoming querying unit for network (60 - 900).

router_alert_check

string

Enable/disable require IGMP packets contain router alert option.

Choices:

  • enable

  • disable

version

string

Maximum version of IGMP to support.

Choices:

  • 3

  • 2

  • 1

join_group

list / elements=dictionary

Join multicast groups.

address

string / required

Multicast group IP address.

multicast_flow

string

Acceptable source for multicast group. Source router.multicast-flow.name.

name

string / required

Interface name. Source system.interface.name.

neighbour_filter

string

Routers acknowledged as neighbor routers. Source router.access-list.name.

passive

string

Enable/disable listening to IGMP but not participating in PIM.

Choices:

  • enable

  • disable

pim_mode

string

PIM operation mode.

Choices:

  • sparse-mode

  • dense-mode

propagation_delay

integer

Delay flooding packets on this interface (100 - 5000 msec).

rp_candidate

string

Enable/disable compete to become RP in elections.

Choices:

  • enable

  • disable

rp_candidate_group

string

Multicast groups managed by this RP. Source router.access-list.name.

rp_candidate_interval

integer

RP candidate advertisement interval (1 - 16383 sec).

rp_candidate_priority

integer

Router”s priority as RP.

rpf_nbr_fail_back

string

Enable/disable fail back for RPF neighbor query.

Choices:

  • enable

  • disable

rpf_nbr_fail_back_filter

string

Filter for fail back RPF neighbors. Source router.access-list.name.

state_refresh_interval

integer

Interval between sending state-refresh packets (1 - 100 sec).

static_group

string

Statically set multicast groups to forward out. Source router.multicast-flow.name.

ttl_threshold

integer

Minimum TTL of multicast packets that will be forwarded (applied only to new multicast routes) (1 - 255).

multicast_routing

string

Enable/disable IP multicast routing.

Choices:

  • enable

  • disable

pim_sm_global

dictionary

PIM sparse-mode global settings.

accept_register_list

string

Sources allowed to register packets with this Rendezvous Point (RP). Source router.access-list.name.

accept_source_list

string

Sources allowed to send multicast traffic. Source router.access-list.name.

bsr_allow_quick_refresh

string

Enable/disable accept BSR quick refresh packets from neighbors.

Choices:

  • enable

  • disable

bsr_candidate

string

Enable/disable allowing this router to become a bootstrap router (BSR).

Choices:

  • enable

  • disable

bsr_hash

integer

BSR hash length (0 - 32).

bsr_interface

string

Interface to advertise as candidate BSR. Source system.interface.name.

bsr_priority

integer

BSR priority (0 - 255).

cisco_crp_prefix

string

Enable/disable making candidate RP compatible with old Cisco IOS.

Choices:

  • enable

  • disable

cisco_ignore_rp_set_priority

string

Use only hash for RP selection (compatibility with old Cisco IOS).

Choices:

  • enable

  • disable

cisco_register_checksum

string

Checksum entire register packet(for old Cisco IOS compatibility).

Choices:

  • enable

  • disable

cisco_register_checksum_group

string

Cisco register checksum only these groups. Source router.access-list.name.

join_prune_holdtime

integer

Join/prune holdtime (1 - 65535).

message_interval

integer

Period of time between sending periodic PIM join/prune messages in seconds (1 - 65535).

null_register_retries

integer

Maximum retries of null register (1 - 20).

register_rate_limit

integer

Limit of packets/sec per source registered through this RP (0 - 65535).

register_rp_reachability

string

Enable/disable check RP is reachable before registering packets.

Choices:

  • enable

  • disable

register_source

string

Override source address in register packets.

Choices:

  • disable

  • interface

  • ip-address

register_source_interface

string

Override with primary interface address. Source system.interface.name.

register_source_ip

string

Override with local IP address.

register_supression

integer

Period of time to honor register-stop message (1 - 65535 sec).

rp_address

list / elements=dictionary

Statically configure RP addresses.

group

string

Groups to use this RP. Source router.access-list.name.

id

integer / required

ID.

ip_address

string

RP router address.

rp_register_keepalive

integer

Timeout for RP receiving data on (S,G) tree (1 - 65535 sec).

spt_threshold

string

Enable/disable switching to source specific trees.

Choices:

  • enable

  • disable

spt_threshold_group

string

Groups allowed to switch to source tree. Source router.access-list.name.

ssm

string

Enable/disable source specific multicast.

Choices:

  • enable

  • disable

ssm_range

string

Groups allowed to source specific multicast. Source router.access-list.name.

route_limit

integer

Maximum number of multicast routes.

route_threshold

integer

Generate warnings when the number of multicast routes exceeds this number, must not be greater than route-limit.

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure router multicast.
    fortios_router_multicast:
      vdom:  "{{ vdom }}"
      router_multicast:
        interface:
         -
            bfd: "enable"
            cisco_exclude_genid: "enable"
            dr_priority: "6"
            hello_holdtime: "7"
            hello_interval: "8"
            igmp:
                access_group: "<your_own_value> (source router.access-list.name)"
                immediate_leave_group: "<your_own_value> (source router.access-list.name)"
                last_member_query_count: "12"
                last_member_query_interval: "13"
                query_interval: "14"
                query_max_response_time: "15"
                query_timeout: "16"
                router_alert_check: "enable"
                version: "3"
            join_group:
             -
                address: "<your_own_value>"
            multicast_flow: "<your_own_value> (source router.multicast-flow.name)"
            name: "default_name_22 (source system.interface.name)"
            neighbour_filter: "<your_own_value> (source router.access-list.name)"
            passive: "enable"
            pim_mode: "sparse-mode"
            propagation_delay: "26"
            rp_candidate: "enable"
            rp_candidate_group: "<your_own_value> (source router.access-list.name)"
            rp_candidate_interval: "29"
            rp_candidate_priority: "30"
            rpf_nbr_fail_back: "enable"
            rpf_nbr_fail_back_filter: "<your_own_value> (source router.access-list.name)"
            state_refresh_interval: "33"
            static_group: "<your_own_value> (source router.multicast-flow.name)"
            ttl_threshold: "35"
        multicast_routing: "enable"
        pim_sm_global:
            accept_register_list: "<your_own_value> (source router.access-list.name)"
            accept_source_list: "<your_own_value> (source router.access-list.name)"
            bsr_allow_quick_refresh: "enable"
            bsr_candidate: "enable"
            bsr_hash: "42"
            bsr_interface: "<your_own_value> (source system.interface.name)"
            bsr_priority: "44"
            cisco_crp_prefix: "enable"
            cisco_ignore_rp_set_priority: "enable"
            cisco_register_checksum: "enable"
            cisco_register_checksum_group: "<your_own_value> (source router.access-list.name)"
            join_prune_holdtime: "49"
            message_interval: "50"
            null_register_retries: "51"
            register_rate_limit: "52"
            register_rp_reachability: "enable"
            register_source: "disable"
            register_source_interface: "<your_own_value> (source system.interface.name)"
            register_source_ip: "<your_own_value>"
            register_supression: "57"
            rp_address:
             -
                group: "<your_own_value> (source router.access-list.name)"
                id:  "60"
                ip_address: "<your_own_value>"
            rp_register_keepalive: "62"
            spt_threshold: "enable"
            spt_threshold_group: "<your_own_value> (source router.access-list.name)"
            ssm: "enable"
            ssm_range: "<your_own_value> (source router.access-list.name)"
        route_limit: "67"
        route_threshold: "68"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)