You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

fortinet.fortios.fortios_router_ospf module – Configure OSPF in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_ospf.

New in version 2.0.0: of fortinet.fortios

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and ospf category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

• ansible>=2.9.0

Parameters

Parameter	Comments
access_token string	Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean	Enable/Disable logging for task. Choices: no ← (default) yes
member_path string	Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation.
member_state string	Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices: present absent
router_ospf dictionary	Configure OSPF.
abr_type string	Area border router type. Choices: cisco ibm shortcut standard
area list / elements=dictionary	OSPF area configuration.
authentication string	Authentication type. Choices: none text message-digest md5
comments string	Comment.
default_cost integer	Summary default cost of stub or NSSA area.
filter_list list / elements=dictionary	OSPF area filter-list configuration.
direction string	Direction. Choices: in out
id integer / required	Filter list entry ID.
list string	Access-list or prefix-list name. Source router.access-list.name router.prefix-list.name.
id string / required	Area entry IP address.
nssa_default_information_originate string	Redistribute, advertise, or do not originate Type-7 default route into NSSA area. Choices: enable always disable
nssa_default_information_originate_metric integer	OSPF default metric.
nssa_default_information_originate_metric_type string	OSPF metric type for default routes. Choices: 1 2
nssa_redistribution string	Enable/disable redistribute into NSSA area. Choices: enable disable
nssa_translator_role string	NSSA translator role type. Choices: candidate never always
range list / elements=dictionary	OSPF area range configuration.
advertise string	Enable/disable advertise status. Choices: disable enable
id integer / required	Range entry ID.
prefix string	Prefix.
substitute string	Substitute prefix.
substitute_status string	Enable/disable substitute status. Choices: enable disable
shortcut string	Enable/disable shortcut option. Choices: disable enable default
stub_type string	Stub summary setting. Choices: no-summary summary
type string	Area type setting. Choices: regular nssa stub
virtual_link list / elements=dictionary	OSPF virtual link configuration.
authentication string	Authentication type. Choices: none text message-digest md5
authentication_key string	Authentication key.
dead_interval integer	Dead interval.
hello_interval integer	Hello interval.
keychain string	Message-digest key-chain name. Source router.key-chain.name.
md5_key string	MD5 key.
md5_keychain string	Authentication MD5 key-chain name. Source router.key-chain.name.
md5_keys list / elements=dictionary	MD5 key.
id integer / required	Key ID (1 - 255).
key_string string	Password for the key.
name string / required	Virtual link entry name.
peer string	Peer IP.
retransmit_interval integer	Retransmit interval.
transmit_delay integer	Transmit delay.
auto_cost_ref_bandwidth integer	Reference bandwidth in terms of megabits per second.
bfd string	Bidirectional Forwarding Detection (BFD). Choices: enable disable
database_overflow string	Enable/disable database overflow. Choices: enable disable
database_overflow_max_lsas integer	Database overflow maximum LSAs.
database_overflow_time_to_recover integer	Database overflow time to recover (sec).
default_information_metric integer	Default information metric.
default_information_metric_type string	Default information metric type. Choices: 1 2
default_information_originate string	Enable/disable generation of default route. Choices: enable always disable
default_information_route_map string	Default information route map. Source router.route-map.name.
default_metric integer	Default metric of redistribute routes.
distance integer	Distance of the route.
distance_external integer	Administrative external distance.
distance_inter_area integer	Administrative inter-area distance.
distance_intra_area integer	Administrative intra-area distance.
distribute_list list / elements=dictionary	Distribute list configuration.
access_list string	Access list name. Source router.access-list.name.
id integer / required	Distribute list entry ID.
protocol string	Protocol type. Choices: connected static rip
distribute_list_in string	Filter incoming routes. Source router.access-list.name router.prefix-list.name.
distribute_route_map_in string	Filter incoming external routes by route-map. Source router.route-map.name.
log_neighbour_changes string	Log of OSPF neighbor changes. Choices: enable disable
neighbor list / elements=dictionary	OSPF neighbor configuration are used when OSPF runs on non-broadcast media.
cost integer	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.
id integer / required	Neighbor entry ID.
ip string	Interface IP address of the neighbor.
poll_interval integer	Poll interval time in seconds.
priority integer	Priority.
network list / elements=dictionary	OSPF network configuration.
area string	Attach the network to area.
comments string	Comment.
id integer / required	Network entry ID.
prefix string	Prefix.
ospf_interface list / elements=dictionary	OSPF interface configuration.
authentication string	Authentication type. Choices: none text message-digest md5
authentication_key string	Authentication key.
bfd string	Bidirectional Forwarding Detection (BFD). Choices: global enable disable
comments string	Comment.
cost integer	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.
database_filter_out string	Enable/disable control of flooding out LSAs. Choices: enable disable
dead_interval integer	Dead interval.
hello_interval integer	Hello interval.
hello_multiplier integer	Number of hello packets within dead interval.
interface string	Configuration interface name. Source system.interface.name.
ip string	IP address.
keychain string	Message-digest key-chain name. Source router.key-chain.name.
md5_key string	MD5 key.
md5_keychain string	Authentication MD5 key-chain name. Source router.key-chain.name.
md5_keys list / elements=dictionary	MD5 key.
id integer / required	Key ID (1 - 255).
key_string string	Password for the key.
mtu integer	MTU for database description packets.
mtu_ignore string	Enable/disable ignore MTU. Choices: enable disable
name string / required	Interface entry name.
network_type string	Network type. Choices: broadcast non-broadcast point-to-point point-to-multipoint point-to-multipoint-non-broadcast
prefix_length integer	Prefix length.
priority integer	Priority.
resync_timeout integer	Graceful restart neighbor resynchronization timeout.
retransmit_interval integer	Retransmit interval.
status string	Enable/disable status. Choices: disable enable
transmit_delay integer	Transmit delay.
passive_interface list / elements=dictionary	Passive interface configuration.
name string / required	Passive interface name. Source system.interface.name.
redistribute list / elements=dictionary	Redistribute configuration.
metric integer	Redistribute metric setting.
metric_type string	Metric type. Choices: 1 2
name string / required	Redistribute name.
routemap string	Route map name. Source router.route-map.name.
status string	Status. Choices: enable disable
tag integer	Tag value.
restart_mode string	OSPF restart mode (graceful or LLS). Choices: none lls graceful-restart
restart_period integer	Graceful restart period.
rfc1583_compatible string	Enable/disable RFC1583 compatibility. Choices: enable disable
router_id string	Router ID.
spf_timers string	SPF calculation frequency.
summary_address list / elements=dictionary	IP address summary configuration.
advertise string	Enable/disable advertise status. Choices: disable enable
id integer / required	Summary address entry ID.
prefix string	Prefix.
tag integer	Tag value.
vdom string	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: “root”

Notes

Note

• Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure OSPF.
    fortios_router_ospf:
      vdom:  "{{ vdom }}"
      router_ospf:
        abr_type: "cisco"
        area:
         -
            authentication: "none"
            comments: "<your_own_value>"
            default_cost: "7"
            filter_list:
             -
                direction: "in"
                id:  "10"
                list: "<your_own_value> (source router.access-list.name router.prefix-list.name)"
            id:  "12"
            nssa_default_information_originate: "enable"
            nssa_default_information_originate_metric: "14"
            nssa_default_information_originate_metric_type: "1"
            nssa_redistribution: "enable"
            nssa_translator_role: "candidate"
            range:
             -
                advertise: "disable"
                id:  "20"
                prefix: "<your_own_value>"
                substitute: "<your_own_value>"
                substitute_status: "enable"
            shortcut: "disable"
            stub_type: "no-summary"
            type: "regular"
            virtual_link:
             -
                authentication: "none"
                authentication_key: "<your_own_value>"
                dead_interval: "30"
                hello_interval: "31"
                keychain: "<your_own_value> (source router.key-chain.name)"
                md5_key: "<your_own_value>"
                md5_keychain: "<your_own_value> (source router.key-chain.name)"
                md5_keys:
                 -
                    id:  "36"
                    key_string: "<your_own_value>"
                name: "default_name_38"
                peer: "<your_own_value>"
                retransmit_interval: "40"
                transmit_delay: "41"
        auto_cost_ref_bandwidth: "42"
        bfd: "enable"
        database_overflow: "enable"
        database_overflow_max_lsas: "45"
        database_overflow_time_to_recover: "46"
        default_information_metric: "47"
        default_information_metric_type: "1"
        default_information_originate: "enable"
        default_information_route_map: "<your_own_value> (source router.route-map.name)"
        default_metric: "51"
        distance: "52"
        distance_external: "53"
        distance_inter_area: "54"
        distance_intra_area: "55"
        distribute_list:
         -
            access_list: "<your_own_value> (source router.access-list.name)"
            id:  "58"
            protocol: "connected"
        distribute_list_in: "<your_own_value> (source router.access-list.name router.prefix-list.name)"
        distribute_route_map_in: "<your_own_value> (source router.route-map.name)"
        log_neighbour_changes: "enable"
        neighbor:
         -
            cost: "64"
            id:  "65"
            ip: "<your_own_value>"
            poll_interval: "67"
            priority: "68"
        network:
         -
            area: "<your_own_value>"
            comments: "<your_own_value>"
            id:  "72"
            prefix: "<your_own_value>"
        ospf_interface:
         -
            authentication: "none"
            authentication_key: "<your_own_value>"
            bfd: "global"
            comments: "<your_own_value>"
            cost: "79"
            database_filter_out: "enable"
            dead_interval: "81"
            hello_interval: "82"
            hello_multiplier: "83"
            interface: "<your_own_value> (source system.interface.name)"
            ip: "<your_own_value>"
            keychain: "<your_own_value> (source router.key-chain.name)"
            md5_key: "<your_own_value>"
            md5_keychain: "<your_own_value> (source router.key-chain.name)"
            md5_keys:
             -
                id:  "90"
                key_string: "<your_own_value>"
            mtu: "92"
            mtu_ignore: "enable"
            name: "default_name_94"
            network_type: "broadcast"
            prefix_length: "96"
            priority: "97"
            resync_timeout: "98"
            retransmit_interval: "99"
            status: "disable"
            transmit_delay: "101"
        passive_interface:
         -
            name: "default_name_103 (source system.interface.name)"
        redistribute:
         -
            metric: "105"
            metric_type: "1"
            name: "default_name_107"
            routemap: "<your_own_value> (source router.route-map.name)"
            status: "enable"
            tag: "110"
        restart_mode: "none"
        restart_period: "112"
        rfc1583_compatible: "enable"
        router_id: "<your_own_value>"
        spf_timers: "<your_own_value>"
        summary_address:
         -
            advertise: "disable"
            id:  "118"
            prefix: "<your_own_value>"
            tag: "120"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
build string	Build number of the fortigate image Returned: always Sample: “1547”
http_method string	Last method used to provision the content into FortiGate Returned: always Sample: “PUT”
http_status string	Last result given by FortiGate on last operation applied Returned: always Sample: “200”
mkey string	Master key (id) used in the last call to FortiGate Returned: success Sample: “id”
name string	Name of the table used to fulfill the request Returned: always Sample: “urlfilter”
path string	Path of the table used to fulfill the request Returned: always Sample: “webfilter”
revision string	Internal revision number Returned: always Sample: “17.0.2.10658”
serial string	Serial number of the unit Returned: always Sample: “FGVMEVYYQT3AB5352”
status string	Indication of the operation’s result Returned: always Sample: “success”
vdom string	Virtual domain used Returned: always Sample: “root”
version string	Version of the FortiGate Returned: always Sample: “v5.6.3”

Authors

• Link Zheng (@chillancezen)

• Jie Xue (@JieX19)

• Hongbin Lu (@fgtdev-hblu)

• Frank Shen (@frankshen01)

• Miguel Angel Munoz (@mamunozgonzalez)

• Nicolas Thomas (@thomnico)

Collection links

Issue Tracker Homepage Repository (Sources)