You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

fortinet.fortios.fortios_router_policy module – Configure IPv4 routing policies in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_policy.

New in version 2.0.0: of fortinet.fortios

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis 

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements 

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters 

Parameter	Comments
access_token string	Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean	Enable/Disable logging for task. Choices: no ← (default) yes
member_path string	Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation.
member_state string	Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices: present absent
router_policy dictionary	Configure IPv4 routing policies.
action string	Action of the policy route. Choices: deny permit
comments string	Optional comments.
dst list / elements=dictionary	Destination IP and mask (x.x.x.x/x).
subnet string / required	IP and mask.
dst_negate string	Enable/disable negating destination address match. Choices: enable disable
dstaddr list / elements=dictionary	Destination address name.
name string / required	Address/group name. Source firewall.address.name firewall.addrgrp.name.
end_port integer	End destination port number (0 - 65535).
end_source_port integer	End source port number (0 - 65535).
gateway string	IP address of the gateway.
input_device list / elements=dictionary	Incoming interface name.
name string / required	Interface name. Source system.interface.name.
input_device_negate string	Enable/disable negation of input device match. Choices: enable disable
internet_service_custom list / elements=dictionary	Custom Destination Internet Service name.
name string / required	Custom Destination Internet Service name. Source firewall.internet-service-custom.name.
internet_service_id list / elements=dictionary	Destination Internet Service ID.
id integer / required	Destination Internet Service ID. Source firewall.internet-service.id.
output_device string	Outgoing interface name. Source system.interface.name.
protocol integer	Protocol number (0 - 255).
seq_num integer	Sequence number(1-65535).
src list / elements=dictionary	Source IP and mask (x.x.x.x/x).
subnet string / required	IP and mask.
src_negate string	Enable/disable negating source address match. Choices: enable disable
srcaddr list / elements=dictionary	Source address name.
name string / required	Address/group name. Source firewall.address.name firewall.addrgrp.name.
start_port integer	Start destination port number (0 - 65535).
start_source_port integer	Start source port number (0 - 65535).
status string	Enable/disable this policy route. Choices: enable disable
tos string	Type of service bit pattern.
tos_mask string	Type of service evaluated bits.
state string / required	Indicates whether to create or remove the object. Choices: present absent
vdom string	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: “root”

Notes 

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples 

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv4 routing policies.
    fortios_router_policy:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      router_policy:
        action: "deny"
        comments: "<your_own_value>"
        dst:
         -
            subnet: "<your_own_value>"
        dst_negate: "enable"
        dstaddr:
         -
            name: "default_name_9 (source firewall.address.name firewall.addrgrp.name)"
        end_port: "10"
        end_source_port: "11"
        gateway: "<your_own_value>"
        input_device:
         -
            name: "default_name_14 (source system.interface.name)"
        input_device_negate: "enable"
        internet_service_custom:
         -
            name: "default_name_17 (source firewall.internet-service-custom.name)"
        internet_service_id:
         -
            id:  "19 (source firewall.internet-service.id)"
        output_device: "<your_own_value> (source system.interface.name)"
        protocol: "21"
        seq_num: "22"
        src:
         -
            subnet: "<your_own_value>"
        src_negate: "enable"
        srcaddr:
         -
            name: "default_name_27 (source firewall.address.name firewall.addrgrp.name)"
        start_port: "28"
        start_source_port: "29"
        status: "enable"
        tos: "<your_own_value>"
        tos_mask: "<your_own_value>"

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
build string	Build number of the fortigate image Returned: always Sample: “1547”
http_method string	Last method used to provision the content into FortiGate Returned: always Sample: “PUT”
http_status string	Last result given by FortiGate on last operation applied Returned: always Sample: “200”
mkey string	Master key (id) used in the last call to FortiGate Returned: success Sample: “id”
name string	Name of the table used to fulfill the request Returned: always Sample: “urlfilter”
path string	Path of the table used to fulfill the request Returned: always Sample: “webfilter”
revision string	Internal revision number Returned: always Sample: “17.0.2.10658”
serial string	Serial number of the unit Returned: always Sample: “FGVMEVYYQT3AB5352”
status string	Indication of the operation’s result Returned: always Sample: “success”
vdom string	Virtual domain used Returned: always Sample: “root”
version string	Version of the FortiGate Returned: always Sample: “v5.6.3”

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

Collection links

Issue Tracker Homepage Repository (Sources)

fortinet.fortios.fortios_router_policy module – Configure IPv4 routing policies in Fortinet’s FortiOS and FortiGate.

Synopsis

Requirements

Parameters

Notes

Examples

Return Values