fortinet.fortios.fortios_user_radius module – Configure RADIUS server entries in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_user_radius.

New in version 2.0.0: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify user feature and radius category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

state

string / required

Indicates whether to create or remove the object.

Choices:

  • present

  • absent

user_radius

dictionary

Configure RADIUS server entries.

accounting_server

list / elements=dictionary

Additional accounting servers.

id

integer / required

ID (0 - 4294967295).

interface

string

Specify outgoing interface to reach server. Source system.interface.name.

interface_select_method

string

Specify how to select outgoing interface to reach server.

Choices:

  • auto

  • sdwan

  • specify

port

integer

RADIUS accounting port number.

secret

string

Secret key.

server

string

Server CN domain name or IP address.

source_ip

string

Source IP address for communications to the RADIUS server.

status

string

Status.

Choices:

  • enable

  • disable

acct_all_servers

string

Enable/disable sending of accounting messages to all configured servers .

Choices:

  • enable

  • disable

acct_interim_interval

integer

Time in seconds between each accounting interim update message.

all_usergroup

string

Enable/disable automatically including this RADIUS server in all user groups.

Choices:

  • disable

  • enable

auth_type

string

Authentication methods/protocols permitted for this RADIUS server.

Choices:

  • auto

  • ms_chap_v2

  • ms_chap

  • chap

  • pap

class

list / elements=dictionary

Class attribute name(s).

name

string / required

Class name.

group_override_attr_type

string

RADIUS attribute type to override user group information.

Choices:

  • filter-Id

  • class

h3c_compatibility

string

Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication.

Choices:

  • enable

  • disable

interface

string

Specify outgoing interface to reach server. Source system.interface.name.

interface_select_method

string

Specify how to select outgoing interface to reach server.

Choices:

  • auto

  • sdwan

  • specify

name

string / required

RADIUS server entry name.

nas_ip

string

IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes.

password_encoding

string

Password encoding.

Choices:

  • auto

  • ISO-8859-1

password_renewal

string

Enable/disable password renewal.

Choices:

  • enable

  • disable

radius_coa

string

Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated.

Choices:

  • enable

  • disable

radius_port

integer

RADIUS service port number.

rsso

string

Enable/disable RADIUS based single sign on feature.

Choices:

  • enable

  • disable

rsso_context_timeout

integer

Time in seconds before the logged out user is removed from the “user context list” of logged on users.

rsso_endpoint_attribute

string

RADIUS attributes used to extract the user end point identifier from the RADIUS Start record.

Choices:

  • User-Name

  • NAS-IP-Address

  • Framed-IP-Address

  • Framed-IP-Netmask

  • Filter-Id

  • Login-IP-Host

  • Reply-Message

  • Callback-Number

  • Callback-Id

  • Framed-Route

  • Framed-IPX-Network

  • Class

  • Called-Station-Id

  • Calling-Station-Id

  • NAS-Identifier

  • Proxy-State

  • Login-LAT-Service

  • Login-LAT-Node

  • Login-LAT-Group

  • Framed-AppleTalk-Zone

  • Acct-Session-Id

  • Acct-Multi-Session-Id

rsso_endpoint_block_attribute

string

RADIUS attributes used to block a user.

Choices:

  • User-Name

  • NAS-IP-Address

  • Framed-IP-Address

  • Framed-IP-Netmask

  • Filter-Id

  • Login-IP-Host

  • Reply-Message

  • Callback-Number

  • Callback-Id

  • Framed-Route

  • Framed-IPX-Network

  • Class

  • Called-Station-Id

  • Calling-Station-Id

  • NAS-Identifier

  • Proxy-State

  • Login-LAT-Service

  • Login-LAT-Node

  • Login-LAT-Group

  • Framed-AppleTalk-Zone

  • Acct-Session-Id

  • Acct-Multi-Session-Id

rsso_ep_one_ip_only

string

Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages.

Choices:

  • enable

  • disable

rsso_flush_ip_session

string

Enable/disable flushing user IP sessions on RADIUS accounting Stop messages.

Choices:

  • enable

  • disable

rsso_log_flags

list / elements=string

Events to log.

Choices:

  • protocol-error

  • profile-missing

  • accounting-stop-missed

  • accounting-event

  • endpoint-block

  • radiusd-other

  • none

rsso_log_period

integer

Time interval in seconds that group event log messages will be generated for dynamic profile events.

rsso_radius_response

string

Enable/disable sending RADIUS response packets after receiving Start and Stop records.

Choices:

  • enable

  • disable

rsso_radius_server_port

integer

UDP port to listen on for RADIUS Start and Stop records.

rsso_secret

string

RADIUS secret used by the RADIUS accounting server.

rsso_validate_request_secret

string

Enable/disable validating the RADIUS request shared secret in the Start or End record.

Choices:

  • enable

  • disable

secondary_secret

string

Secret key to access the secondary server.

secondary_server

string

Secondary RADIUS CN domain name or IP address.

secret

string

Pre-shared secret key used to access the primary RADIUS server.

server

string

Primary RADIUS server CN domain name or IP address.

source_ip

string

Source IP address for communications to the RADIUS server.

sso_attribute

string

RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record.

Choices:

  • User-Name

  • NAS-IP-Address

  • Framed-IP-Address

  • Framed-IP-Netmask

  • Filter-Id

  • Login-IP-Host

  • Reply-Message

  • Callback-Number

  • Callback-Id

  • Framed-Route

  • Framed-IPX-Network

  • Class

  • Called-Station-Id

  • Calling-Station-Id

  • NAS-Identifier

  • Proxy-State

  • Login-LAT-Service

  • Login-LAT-Node

  • Login-LAT-Group

  • Framed-AppleTalk-Zone

  • Acct-Session-Id

  • Acct-Multi-Session-Id

sso_attribute_key

string

Key prefix for SSO group value in the SSO attribute.

sso_attribute_value_override

string

Enable/disable override old attribute value with new value for the same endpoint.

Choices:

  • enable

  • disable

switch_controller_acct_fast_framedip_detect

integer

Switch controller accounting message Framed-IP detection from DHCP snooping (seconds).

switch_controller_service_type

list / elements=string

RADIUS service type.

Choices:

  • login

  • framed

  • callback-login

  • callback-framed

  • outbound

  • administrative

  • nas-prompt

  • authenticate-only

  • callback-nas-prompt

  • call-check

  • callback-administrative

tertiary_secret

string

Secret key to access the tertiary server.

tertiary_server

string

Tertiary RADIUS CN domain name or IP address.

timeout

integer

Time in seconds between re-sending authentication requests.

use_management_vdom

string

Enable/disable using management VDOM to send requests.

Choices:

  • enable

  • disable

username_case_sensitive

string

Enable/disable case sensitive user names.

Choices:

  • enable

  • disable

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure RADIUS server entries.
    fortios_user_radius:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      user_radius:
        accounting_server:
         -
            id:  "4"
            interface: "<your_own_value> (source system.interface.name)"
            interface_select_method: "auto"
            port: "7"
            secret: "<your_own_value>"
            server: "192.168.100.40"
            source_ip: "84.230.14.43"
            status: "enable"
        acct_all_servers: "enable"
        acct_interim_interval: "13"
        all_usergroup: "disable"
        auth_type: "auto"
        class:
         -
            name: "default_name_17"
        group_override_attr_type: "filter-Id"
        h3c_compatibility: "enable"
        interface: "<your_own_value> (source system.interface.name)"
        interface_select_method: "auto"
        name: "default_name_22"
        nas_ip: "<your_own_value>"
        password_encoding: "auto"
        password_renewal: "enable"
        radius_coa: "enable"
        radius_port: "27"
        rsso: "enable"
        rsso_context_timeout: "29"
        rsso_endpoint_attribute: "User-Name"
        rsso_endpoint_block_attribute: "User-Name"
        rsso_ep_one_ip_only: "enable"
        rsso_flush_ip_session: "enable"
        rsso_log_flags: "protocol-error"
        rsso_log_period: "35"
        rsso_radius_response: "enable"
        rsso_radius_server_port: "37"
        rsso_secret: "<your_own_value>"
        rsso_validate_request_secret: "enable"
        secondary_secret: "<your_own_value>"
        secondary_server: "<your_own_value>"
        secret: "<your_own_value>"
        server: "192.168.100.40"
        source_ip: "84.230.14.43"
        sso_attribute: "User-Name"
        sso_attribute_key: "<your_own_value>"
        sso_attribute_value_override: "enable"
        switch_controller_acct_fast_framedip_detect: "48"
        switch_controller_service_type: "login"
        tertiary_secret: "<your_own_value>"
        tertiary_server: "<your_own_value>"
        timeout: "52"
        use_management_vdom: "enable"
        username_case_sensitive: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)