fortinet.fortios.fortios_vpn_ssl_settings module – Configure SSL-VPN in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.6).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ssl_settings.

New in version 2.0.0: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ssl feature and settings category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

vpn_ssl_settings

dictionary

Configure SSL-VPN.

algorithm

string

Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any.

Choices:

  • high

  • medium

  • default

  • low

auth_session_check_source_ip

string

Enable/disable checking of source IP for authentication session.

Choices:

  • enable

  • disable

auth_timeout

integer

SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).

authentication_rule

list / elements=dictionary

Authentication rule for SSL-VPN.

auth

string

SSL-VPN authentication method restriction.

Choices:

  • any

  • local

  • radius

  • tacacs+

  • ldap

  • peer

cipher

string

SSL-VPN cipher strength.

Choices:

  • any

  • high

  • medium

client_cert

string

Enable/disable SSL-VPN client certificate restrictive.

Choices:

  • enable

  • disable

groups

list / elements=dictionary

User groups.

name

string / required

Group name. Source user.group.name.

id

integer / required

ID (0 - 4294967295).

portal

string

SSL-VPN portal. Source vpn.ssl.web.portal.name.

realm

string

SSL-VPN realm. Source vpn.ssl.web.realm.url-path.

source_address

list / elements=dictionary

Source address of incoming traffic.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name system.external-resource.name.

source_address6

list / elements=dictionary

IPv6 source address of incoming traffic.

name

string / required

IPv6 address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.

source_address6_negate

string

Enable/disable negated source IPv6 address match.

Choices:

  • enable

  • disable

source_address_negate

string

Enable/disable negated source address match.

Choices:

  • enable

  • disable

source_interface

list / elements=dictionary

SSL-VPN source interface of incoming traffic.

name

string / required

Interface name. Source system.interface.name system.zone.name.

user_peer

string

Name of user peer. Source user.peer.name.

users

list / elements=dictionary

User name.

name

string / required

User name. Source user.local.name.

auto_tunnel_static_route

string

Enable/disable to auto-create static routes for the SSL-VPN tunnel IP addresses.

Choices:

  • enable

  • disable

banned_cipher

list / elements=string

Select one or more cipher technologies that cannot be used in SSL-VPN negotiations. Only applies to TLS 1.2 and below.

Choices:

  • RSA

  • DHE

  • ECDHE

  • DSS

  • ECDSA

  • AES

  • AESGCM

  • CAMELLIA

  • 3DES

  • SHA1

  • SHA256

  • SHA384

  • STATIC

  • CHACHA20

  • ARIA

  • AESCCM

  • DH

  • ECDH

check_referer

string

Enable/disable verification of referer field in HTTP request header.

Choices:

  • enable

  • disable

ciphersuite

list / elements=string

Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below.

Choices:

  • TLS-AES-128-GCM-SHA256

  • TLS-AES-256-GCM-SHA384

  • TLS-CHACHA20-POLY1305-SHA256

  • TLS-AES-128-CCM-SHA256

  • TLS-AES-128-CCM-8-SHA256

client_sigalgs

string

Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only.

Choices:

  • no-rsa-pss

  • all

default_portal

string

Default SSL-VPN portal. Source vpn.ssl.web.portal.name.

deflate_compression_level

integer

Compression level (0~9).

deflate_min_data_size

integer

Minimum amount of data that triggers compression (200 - 65535 bytes).

dns_server1

string

DNS server 1.

dns_server2

string

DNS server 2.

dns_suffix

string

DNS suffix used for SSL-VPN clients.

dtls_hello_timeout

integer

SSLVPN maximum DTLS hello timeout (10 - 60 sec).

dtls_max_proto_ver

string

DTLS maximum protocol version.

Choices:

  • dtls1-0

  • dtls1-2

dtls_min_proto_ver

string

DTLS minimum protocol version.

Choices:

  • dtls1-0

  • dtls1-2

dtls_tunnel

string

Enable/disable DTLS to prevent eavesdropping, tampering, or message forgery.

Choices:

  • enable

  • disable

dual_stack_mode

string

Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal.

Choices:

  • enable

  • disable

encode_2f_sequence

string

Encode 2F sequence to forward slash in URLs.

Choices:

  • enable

  • disable

encrypt_and_store_password

string

Encrypt and store user passwords for SSL-VPN web sessions.

Choices:

  • enable

  • disable

force_two_factor_auth

string

Enable/disable only PKI users with two-factor authentication for SSL-VPNs.

Choices:

  • enable

  • disable

header_x_forwarded_for

string

Forward the same, add, or remove HTTP header.

Choices:

  • pass

  • add

  • remove

hsts_include_subdomains

string

Add HSTS includeSubDomains response header.

Choices:

  • enable

  • disable

http_compression

string

Enable/disable to allow HTTP compression over SSL-VPN tunnels.

Choices:

  • enable

  • disable

string

Enable/disable SSL-VPN support for HttpOnly cookies.

Choices:

  • enable

  • disable

http_request_body_timeout

integer

SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec).

http_request_header_timeout

integer

SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec).

https_redirect

string

Enable/disable redirect of port 80 to SSL-VPN port.

Choices:

  • enable

  • disable

idle_timeout

integer

SSL-VPN disconnects if idle for specified time in seconds.

ipv6_dns_server1

string

IPv6 DNS server 1.

ipv6_dns_server2

string

IPv6 DNS server 2.

ipv6_wins_server1

string

IPv6 WINS server 1.

ipv6_wins_server2

string

IPv6 WINS server 2.

login_attempt_limit

integer

SSL-VPN maximum login attempt times before block (0 - 10).

login_block_time

integer

Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec).

login_timeout

integer

SSLVPN maximum login timeout (10 - 180 sec).

port

integer

SSL-VPN access port (1 - 65535).

port_precedence

string

Enable/disable, Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface.

Choices:

  • enable

  • disable

reqclientcert

string

Enable/disable to require client certificates for all SSL-VPN users.

Choices:

  • enable

  • disable

route_source_interface

string

Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface.

Choices:

  • enable

  • disable

saml_redirect_port

integer

SAML local redirect port in the machine running FortiClient (0 - 65535). 0 is to disable redirection on FGT side.

servercert

string

Name of the server certificate to be used for SSL-VPNs. Source vpn.certificate.local.name.

source_address

list / elements=dictionary

Source address of incoming traffic.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name system.external-resource.name.

source_address6

list / elements=dictionary

IPv6 source address of incoming traffic.

name

string / required

IPv6 address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.

source_address6_negate

string

Enable/disable negated source IPv6 address match.

Choices:

  • enable

  • disable

source_address_negate

string

Enable/disable negated source address match.

Choices:

  • enable

  • disable

source_interface

list / elements=dictionary

SSL-VPN source interface of incoming traffic.

name

string / required

Interface name. Source system.interface.name system.zone.name.

ssl_client_renegotiation

string

Enable/disable to allow client renegotiation by the server if the tunnel goes down.

Choices:

  • disable

  • enable

ssl_insert_empty_fragment

string

Enable/disable insertion of empty fragment.

Choices:

  • enable

  • disable

ssl_max_proto_ver

string

SSL maximum protocol version.

Choices:

  • tls1-0

  • tls1-1

  • tls1-2

  • tls1-3

ssl_min_proto_ver

string

SSL minimum protocol version.

Choices:

  • tls1-0

  • tls1-1

  • tls1-2

  • tls1-3

status

string

Enable/disable SSL-VPN.

Choices:

  • enable

  • disable

tlsv1_0

string

tlsv1-0

Choices:

  • enable

  • disable

tlsv1_1

string

tlsv1-1

Choices:

  • enable

  • disable

tlsv1_2

string

tlsv1-2

Choices:

  • enable

  • disable

tlsv1_3

string

tlsv1-3

Choices:

  • enable

  • disable

transform_backward_slashes

string

Transform backward slashes to forward slashes in URLs.

Choices:

  • enable

  • disable

tunnel_addr_assigned_method

string

Method used for assigning address for tunnel.

Choices:

  • first-available

  • round-robin

tunnel_connect_without_reauth

string

Enable/disable tunnel connection without re-authorization if previous connection dropped.

Choices:

  • enable

  • disable

tunnel_ip_pools

list / elements=dictionary

Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name.

tunnel_ipv6_pools

list / elements=dictionary

Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name.

tunnel_user_session_timeout

integer

Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec).

unsafe_legacy_renegotiation

string

Enable/disable unsafe legacy re-negotiation.

Choices:

  • enable

  • disable

url_obscuration

string

Enable/disable to obscure the host name of the URL of the web browser display.

Choices:

  • enable

  • disable

user_peer

string

Name of user peer. Source user.peer.name.

wins_server1

string

WINS server 1.

wins_server2

string

WINS server 2.

x_content_type_options

string

Add HTTP X-Content-Type-Options header.

Choices:

  • enable

  • disable

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure SSL-VPN.
    fortios_vpn_ssl_settings:
      vdom:  "{{ vdom }}"
      vpn_ssl_settings:
        algorithm: "high"
        auth_session_check_source_ip: "enable"
        auth_timeout: "5"
        authentication_rule:
         -
            auth: "any"
            cipher: "any"
            client_cert: "enable"
            groups:
             -
                name: "default_name_11 (source user.group.name)"
            id:  "12"
            portal: "<your_own_value> (source vpn.ssl.web.portal.name)"
            realm: "<your_own_value> (source vpn.ssl.web.realm.url-path)"
            source_address:
             -
                name: "default_name_16 (source firewall.address.name firewall.addrgrp.name system.external-resource.name)"
            source_address_negate: "enable"
            source_address6:
             -
                name: "default_name_19 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
            source_address6_negate: "enable"
            source_interface:
             -
                name: "default_name_22 (source system.interface.name system.zone.name)"
            user_peer: "<your_own_value> (source user.peer.name)"
            users:
             -
                name: "default_name_25 (source user.local.name)"
        auto_tunnel_static_route: "enable"
        banned_cipher: "RSA"
        check_referer: "enable"
        ciphersuite: "TLS-AES-128-GCM-SHA256"
        client_sigalgs: "no-rsa-pss"
        default_portal: "<your_own_value> (source vpn.ssl.web.portal.name)"
        deflate_compression_level: "32"
        deflate_min_data_size: "33"
        dns_server1: "<your_own_value>"
        dns_server2: "<your_own_value>"
        dns_suffix: "<your_own_value>"
        dtls_hello_timeout: "37"
        dtls_max_proto_ver: "dtls1-0"
        dtls_min_proto_ver: "dtls1-0"
        dtls_tunnel: "enable"
        dual_stack_mode: "enable"
        encode_2f_sequence: "enable"
        encrypt_and_store_password: "enable"
        force_two_factor_auth: "enable"
        header_x_forwarded_for: "pass"
        hsts_include_subdomains: "enable"
        http_compression: "enable"
        http_only_cookie: "enable"
        http_request_body_timeout: "49"
        http_request_header_timeout: "50"
        https_redirect: "enable"
        idle_timeout: "52"
        ipv6_dns_server1: "<your_own_value>"
        ipv6_dns_server2: "<your_own_value>"
        ipv6_wins_server1: "<your_own_value>"
        ipv6_wins_server2: "<your_own_value>"
        login_attempt_limit: "57"
        login_block_time: "58"
        login_timeout: "59"
        port: "60"
        port_precedence: "enable"
        reqclientcert: "enable"
        route_source_interface: "enable"
        saml_redirect_port: "64"
        servercert: "<your_own_value> (source vpn.certificate.local.name)"
        source_address:
         -
            name: "default_name_67 (source firewall.address.name firewall.addrgrp.name system.external-resource.name)"
        source_address_negate: "enable"
        source_address6:
         -
            name: "default_name_70 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
        source_address6_negate: "enable"
        source_interface:
         -
            name: "default_name_73 (source system.interface.name system.zone.name)"
        ssl_client_renegotiation: "disable"
        ssl_insert_empty_fragment: "enable"
        ssl_max_proto_ver: "tls1-0"
        ssl_min_proto_ver: "tls1-0"
        status: "enable"
        tlsv1_0: "enable"
        tlsv1_1: "enable"
        tlsv1_2: "enable"
        tlsv1_3: "enable"
        transform_backward_slashes: "enable"
        tunnel_addr_assigned_method: "first-available"
        tunnel_connect_without_reauth: "enable"
        tunnel_ip_pools:
         -
            name: "default_name_87 (source firewall.address.name firewall.addrgrp.name)"
        tunnel_ipv6_pools:
         -
            name: "default_name_89 (source firewall.address6.name firewall.addrgrp6.name)"
        tunnel_user_session_timeout: "90"
        unsafe_legacy_renegotiation: "enable"
        url_obscuration: "enable"
        user_peer: "<your_own_value> (source user.peer.name)"
        wins_server1: "<your_own_value>"
        wins_server2: "<your_own_value>"
        x_content_type_options: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)