You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

infoblox.nios_modules.nios_fixed_address module – Configure Infoblox NIOS DHCP Fixed Address

Note

This module is part of the infoblox.nios_modules collection (version 1.2.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install infoblox.nios_modules.

To use it in a playbook, specify: infoblox.nios_modules.nios_fixed_address.

New in version 1.0.0: of infoblox.nios_modules

Synopsis
Requirements
Parameters
Notes
Examples

Synopsis 

A fixed address is a specific IP address that a DHCP server always assigns when a lease request comes from a particular MAC address of the client.
A fix address reservation is a specific IP address that a DHCP server reserves and never assigns to a client.
Supports both IPV4 and IPV6 internet protocols.

Requirements 

The below requirements are needed on the host that executes this module.

infoblox-client

Parameters 

Parameter	Comments
comment string	Configures a text string comment to be associated with the instance of this object. The provided text string will be configured on the object instance.
duid string	The DUID address of the IPv6 interface.
extattrs dictionary	Allows for the configuration of Extensible Attributes on the instance of the object. This argument accepts a set of key / value pairs for configuration.
ipaddr string / required	IPV4/V6 address of the fixed address.
mac string	The MAC address of the IPv4 interface. For a fix address reservation specify mac address as 00:00:00:00:00:00
name string / required	Specifies the hostname with which fixed DHCP ip-address is stored for respective mac.
network aliases: network string	Specifies the network range in which ipaddr exists.
network_view string	Configures the name of the network view to associate with this configured instance. Default: “default”
options list / elements=dictionary	Configures the set of DHCP options to be included as part of the configured network instance. This argument accepts a list of values (see suboptions). When configuring suboptions at least one of `name` or `num` must be specified.
name string	The name of the DHCP option to configure
num integer	The number of the DHCP option to configure
use_option boolean	Only applies to a subset of options (see NIOS API documentation) Choices: no yes ← (default)
value string / required	The value of the DHCP option specified by `name`
vendor_class string	The name of the space this DHCP option is associated to Default: “DHCP”
provider dictionary	A dict object containing connection details.
host string	Specifies the DNS host name or address for connecting to the remote instance of NIOS WAPI over REST Value can also be specified using `INFOBLOX_HOST` environment variable.
http_pool_connections integer	Insert decription here Default: 10
http_pool_maxsize integer	Insert description here Default: 10
http_request_timeout integer	The amount of time before to wait before receiving a response Value can also be specified using `INFOBLOX_HTTP_REQUEST_TIMEOUT` environment variable. Default: 10
max_results integer	Specifies the maximum number of objects to be returned, if set to a negative number the appliance will return an error when the number of returned objects would exceed the setting. Value can also be specified using `INFOBLOX_MAX_RESULTS` environment variable. Default: 1000
max_retries integer	Configures the number of attempted retries before the connection is declared usable Value can also be specified using `INFOBLOX_MAX_RETRIES` environment variable. Default: 3
password string	Specifies the password to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using `INFOBLOX_PASSWORD` environment variable.
silent_ssl_warnings boolean	Insert description here Choices: no yes ← (default)
username string	Configures the username to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using `INFOBLOX_USERNAME` environment variable.
validate_certs aliases: ssl_verify boolean	Boolean value to enable or disable verifying SSL certificates Value can also be specified using `INFOBLOX_SSL_VERIFY` environment variable. Choices: no ← (default) yes
wapi_version string	Specifies the version of WAPI to use Value can also be specified using `INFOBLOX_WAP_VERSION` environment variable. Until ansible 2.8 the default WAPI was 1.4 Default: “2.1”
state string	Configures the intended state of the instance of the object on the NIOS server. When this value is set to `present`, the object is configured on the device and when this value is set to `absent` the value is removed (if necessary) from the device. Choices: present ← (default) absent

Notes 

Note

The “mac” field is mandatory for all CRUD operations relating to IPv4 Fixed address.
The “duid” field is mandatory for all CRUD operations relating to IPv6 Fixed address.
This module supports check_mode.
This module must be run locally, which can be achieved by specifying connection: local.
Please read the Infoblox Guide for more detailed information on how to use Infoblox with Ansible.

Examples 

- name: Configure an ipv4 dhcp fixed address
  infoblox.nios_modules.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 08:6d:41:e8:fd:e8
    network: 192.168.10.0/24
    network_view: default
    comment: this is a test comment
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

- name: Configure an ipv4 dhcp fixed address reservation
  infoblox.nios_modules.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 00:00:00:00:00:00
    network: 192.168.10.0/24
    network_view: default
    comment: this is a test comment
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

- name: Configure an ipv6 dhcp fixed address
  infoblox.nios_modules.nios_fixed_address:
    name: ipv6_fixed
    ipaddr: fe80::1/10
    mac: 08:6d:41:e8:fd:e8
    network: fe80::/64
    network_view: default
    comment: this is a test comment
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

- name: Set dhcp options for an ipv4 fixed address
  infoblox.nios_modules.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 08:6d:41:e8:fd:e8
    network: 192.168.10.0/24
    network_view: default
    comment: this is a test comment
    options:
      - name: domain-name
        value: ansible.com
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

- name: Remove an ipv4 dhcp fixed address
  infoblox.nios_modules.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 08:6d:41:e8:fd:e8
    network: 192.168.10.0/24
    network_view: default
    state: absent
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

Authors

Sumit Jaiswal (@sjaiswal)

Collection links

Issue Tracker Homepage Repository (Sources)

infoblox.nios_modules.nios_fixed_address module – Configure Infoblox NIOS DHCP Fixed Address

Synopsis

Requirements

Parameters

Notes

Examples