You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

junipernetworks.junos.junos_bgp_global module – Manages BGP Global configuration on devices running Juniper JUNOS.

Note

This module is part of the junipernetworks.junos collection (version 2.10.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_bgp_global.

New in version 1.3.0: of junipernetworks.junos

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis 

This module manages global bgp configuration on devices running Juniper JUNOS.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)
xmltodict (>=0.12.0)

Parameters 

Parameter	Comments
config dictionary	A list of BGP process configuration.
accept_remote_nexthop boolean	Allow import policy to specify a non-directly connected next-hop. Choices: no yes
add_path_display_ipv4_address boolean	Display add-path path-id in IPv4 address format. Choices: no yes
advertise_bgp_static dictionary	Advertise bgp-static routes.
policy string	Specify static route advertisement policy.
set boolean	Set Advertise bgp-static routes. Choices: no yes
advertise_external dictionary	Advertise best external routes.
conditional boolean	Route matches active route upto med-comparison rule. Choices: no yes
set boolean	Set Advertise best external routes. Choices: no yes
advertise_from_main_vpn_tables boolean	Advertise VPN routes from bgp.Xvpn.0 tables in master instance. Choices: no yes
advertise_inactive boolean	Advertise inactive routes. Choices: no yes
advertise_peer_as boolean	Advertise routes received from the same autonomous system. Choices: no yes
as_number string	Specify Autonomous system number.
asdot_notation boolean	Enable AS-Dot notation to display true 4 byte AS numbers. Choices: no yes
authentication_algorithm string	Specify authentication algorithm name. Choices: aes-128-cmac-96 hmac-sha-1-96 md5
authentication_key string	Specify MD5 authentication key.
authentication_key_chain string	Specify authentication key chain name.
bfd_liveness_detection dictionary	Bidirectional Forwarding Detection (BFD) options.
authentication dictionary	Authentication options.
algorithm string	Specify algorithm name. Choices: keyed-md5 keyed-sha-1 meticulous-keyed-md5 meticulous-keyed-sha-1 simple-password
key_chain string	Specify Key chain name.
loose_check boolean	Verify authentication only if authentication is negotiated. Choices: no yes
detection_time dictionary	Specify Detection-time optionss.
threshold integer	Specify high detection-time triggering a trap (milliseconds).
holddown_interval integer	Specify time to hold the session-UP notification to the client.
minimum_interval integer	Specify minimum transmit and receive interval.
minimum_receive_interval integer	Specify minimum receive interval.
multiplier integer	Specify detection time multiplier.
no_adaptation boolean	Disable adaptation. Choices: no yes
session_mode string	BFD single-hop or multihop session-mode. Choices: automatic multihop single-hop
transmit_interval dictionary	Transmit-interval options.
minimum_interval integer	Specify Minimum transmit interval.
threshold integer	Specify high transmit interval triggering a trap.
version string	Specify BFD protocol version number. Choices: 0 1 automatic
bgp_error_tolerance dictionary	Handle BGP malformed updates softly.
malformed_route_limit integer	Maximum number of malformed routes from a peer.
malformed_update_log_interval integer	Time used when logging malformed update.
no_malformed_route_limit boolean	Specify no malformed route limit. Choices: no yes
set boolean	Set BGP malformed updates softly. Choices: no yes
bmp dictionary	Specific settings to override the routing-options settings.
monitor boolean	Enable/Disable monitoring. Choices: no yes
route_monitoring dictionary	Control route monitoring settings.
none boolean	Do not send route montoring messages. Choices: no yes
post_policy boolean	Send post policy route montoring messages. Choices: no yes
post_policy_exclude_non_eligible boolean	Send post policy route montoring messages and exclude unresolved routes, etc. Choices: no yes
post_policy_exclude_non_feasible boolean	Send pre policy route montoring messages and exclude looped routes, etc. Choices: no yes
pre_policy boolean	Send pre policy route montoring messages. Choices: no yes
cluster_id string	Specify cluster identifier.
damping boolean	Enable route flap damping. Choices: no yes
description string	Specify text description.
disable boolean	Disable BGP. Choices: no yes
egress_te dictionary	Use Egress Peering traffic engineering.
backup_path string	The ‘egress-te-backup-paths template’ to use for this peer.
set boolean	Set the attribute. Choices: no yes
egress_te_backup_paths dictionary	Backup-path for Egress-TE peer interface failure.
templates list / elements=dictionary	Specify Backup-path template.
ip_forward dictionary	Use IP-forward backup path for Egress TE.
rti_name string	Routing-instance to use as IP forward backup-path.
set boolean	Set use IP-forward backup path for Egress TE. Choices: no yes
path_name string / required	Name of Egress-TE backup path.
peers list / elements=string	Specify address of BGP peer to use as backup next-hop.
remote_nexthop string	Specify address of remote-nexthop to use as backup path.
egress_te_set_segment list / elements=dictionary	Configure BGP-Peer-Set segment.
egress_te_backup_segment_label integer	BGP-Peer-Set SID label value from static label pool.
label integer	Backup segment label value from static label pool.
name string / required	The BGP-Peer-Set segment name.
egress_te_sid_stats boolean	Create BGP-Peer-SID sensor. Choices: no yes
enforce_first_as boolean	Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP). Choices: no yes
export string	Specify export policy.
forwarding_context string	Specify routing-instance used for data-forwarding and transport-session.
graceful_restart dictionary	BGP graceful restart options.
disable boolean	Disable graceful restart. Choices: no yes
dont_help_shared_fate_bfd_down boolean	Honor BFD-Down(C=0) if GR-restart not in progress. Choices: no yes
forwarding_state_bit dictionary	Control forwarding-state flag negotiation.
as_rr_client boolean	As for a route reflector client. Choices: no yes
from_fib boolean	Always use state of associated FIB(s). Choices: no yes
long_lived dictionary	Long-lived graceful restart options.
advertise_to_non_llgr_neighbor dictionary	Advertise stale routes to non-LLGR neighbors.
omit_no_export boolean	Set Advertise stale routes to non-LLGR neighbors. Choices: no yes
set boolean	Set Advertise stale routes to non-LLGR neighbors. Choices: no yes
receiver_disable boolean	Disable receiver (helper) functionality. Choices: no yes
restart_time integer	Restart time used when negotiating with a peer.
set boolean	Set BGP graceful restart options. Choices: no yes
stale_routes_time integer	Maximum time for which stale routes are kept.
groups list / elements=dictionary	Specify name of the group.
accept_remote_nexthop boolean	Allow import policy to specify a non-directly connected next-hop. Choices: no yes
add_path_display_ipv4_address boolean	Display add-path path-id in IPv4 address format. Choices: no yes
advertise_bgp_static dictionary	Advertise bgp-static routes.
policy string	Specify static route advertisement policy.
set boolean	Set Advertise bgp-static routes. Choices: no yes
advertise_external dictionary	Advertise best external routes.
conditional boolean	Route matches active route upto med-comparison rule. Choices: no yes
set boolean	Set Advertise best external routes. Choices: no yes
advertise_inactive boolean	Advertise inactive routes. Choices: no yes
advertise_peer_as boolean	Advertise routes received from the same autonomous system. Choices: no yes
allow list / elements=string	Configure peer connections for specific networks.
as_override boolean	Replace neighbor AS number with our AS number Choices: no yes
authentication_algorithm string	Specify authentication algorithm name. Choices: aes-128-cmac-96 hmac-sha-1-96 md5
authentication_key string	Specify MD5 authentication key.
authentication_key_chain string	Specify authentication key chain name.
bfd_liveness_detection dictionary	Bidirectional Forwarding Detection (BFD) options.
authentication dictionary	Authentication options.
algorithm string	Specify algorithm name. Choices: keyed-md5 keyed-sha-1 meticulous-keyed-md5 meticulous-keyed-sha-1 simple-password
key_chain string	Specify Key chain name.
loose_check boolean	Verify authentication only if authentication is negotiated. Choices: no yes
detection_time dictionary	Specify Detection-time optionss.
threshold integer	Specify high detection-time triggering a trap (milliseconds).
holddown_interval integer	Specify time to hold the session-UP notification to the client.
minimum_interval integer	Specify minimum transmit and receive interval.
minimum_receive_interval integer	Specify minimum receive interval.
multiplier integer	Specify detection time multiplier.
no_adaptation boolean	Disable adaptation. Choices: no yes
session_mode string	BFD single-hop or multihop session-mode. Choices: automatic multihop single-hop
transmit_interval dictionary	Transmit-interval options.
minimum_interval integer	Specify Minimum transmit interval.
threshold integer	Specify high transmit interval triggering a trap.
version string	Specify BFD protocol version number. Choices: 0 1 automatic
bgp_error_tolerance dictionary	Handle BGP malformed updates softly.
malformed_route_limit integer	Maximum number of malformed routes from a peer.
malformed_update_log_interval integer	Time used when logging malformed update.
no_malformed_route_limit boolean	Specify no malformed route limit. Choices: no yes
set boolean	Set BGP malformed updates softly. Choices: no yes
bmp dictionary	Specific settings to override the routing-options settings.
monitor boolean	Enable/Disable monitoring. Choices: no yes
route_monitoring dictionary	Control route monitoring settings.
none boolean	Do not send route montoring messages. Choices: no yes
post_policy boolean	Send post policy route montoring messages. Choices: no yes
post_policy_exclude_non_eligible boolean	Send post policy route montoring messages and exclude unresolved routes, etc. Choices: no yes
post_policy_exclude_non_feasible boolean	Send pre policy route montoring messages and exclude looped routes, etc. Choices: no yes
pre_policy boolean	Send pre policy route montoring messages. Choices: no yes
cluster_id string	Specify cluster identifier.
damping boolean	Enable route flap damping. Choices: no yes
description string	Specify text description.
egress_te dictionary	Use Egress Peering traffic engineering.
backup_path string	The ‘egress-te-backup-paths template’ to use for this peer.
set boolean	Set the attribute. Choices: no yes
enforce_first_as boolean	Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP). Choices: no yes
export string	Specify export policy.
forwarding_context string	Specify routing-instance used for data-forwarding and transport-session.
graceful_restart dictionary	BGP graceful restart options.
disable boolean	Disable graceful restart. Choices: no yes
dont_help_shared_fate_bfd_down boolean	Honor BFD-Down(C=0) if GR-restart not in progress. Choices: no yes
forwarding_state_bit dictionary	Control forwarding-state flag negotiation.
as_rr_client boolean	As for a route reflector client. Choices: no yes
from_fib boolean	Always use state of associated FIB(s). Choices: no yes
long_lived dictionary	Long-lived graceful restart options.
advertise_to_non_llgr_neighbor dictionary	Advertise stale routes to non-LLGR neighbors.
omit_no_export boolean	Set Advertise stale routes to non-LLGR neighbors. Choices: no yes
set boolean	Set Advertise stale routes to non-LLGR neighbors. Choices: no yes
receiver_disable boolean	Disable receiver (helper) functionality. Choices: no yes
restart_time integer	Restart time used when negotiating with a peer.
set boolean	Set BGP graceful restart options. Choices: no yes
stale_routes_time integer	Maximum time for which stale routes are kept.
hold_time integer	Specify hold time used when negotiating with a peer.
idle_after_switch_over dictionary	Stop peer session from coming up after nonstop-routing switch-over.
forever boolean	Idle the peer until the user intervenes. Choices: no yes
timeout integer	Specify timeout value, in seconds, for starting peer after switch over.
import list / elements=string	Specify import policy.
include_mp_next_hop boolean	Include NEXT-HOP attribute in multiprotocol updates. Choices: no yes
ipsec_sa string	Specify IPSec SA name.
keep string	Specify how to retain routes in the routing table. Choices: all none
local_address string	Specify Address of local end of BGP session.
local_as dictionary	Local autonomous system number.
alias boolean	Treat this AS as an alias to the system AS. Choices: no yes
as_num string / required	Autonomous system number in plain number or (asdot notation) format.
loops integer	Maximum number of times this AS can be in an AS path.
no_prepend_global_as boolean	Maximum number of times this AS can be in an AS path. Choices: no yes
private boolean	Hide this local AS in paths learned from this peering. Choices: no yes
local_interface string	Specify Local interface for IPv6 link local EBGP peering.
local_preference string	Specify value of LOCAL_PREF path attribute.
log_updown boolean	Enable log a message for peer state transitions. Choices: no yes
metric_out dictionary	Specify route metric sent in MED.
igp dictionary	Track the IGP metric.
delay_med_update boolean	Delay updating MED when IGP metric increases. Choices: no yes
metric_offset integer	Specify metric offset for MED.
set boolean	Set track the IGP metric. Choices: no yes
metric_value integer	Specify metric value.
minimum_igp dictionary	Track the minimum IGP metric.
metric_offset integer	Specify metric offset for MED.
set boolean	Set track the minimum IGP metric. Choices: no yes
mtu_discovery boolean	Enable TCP path MTU discovery. Choices: no yes
multihop dictionary	Configure an EBGP multihop session.
no_nexthop_change boolean	Do not change next hop to self in advertisements. Choices: no yes
set boolean	Set an EBGP multihop session. Choices: no yes
ttl integer	TTL value for the session.
multipath dictionary	Allow load sharing among multiple BGP paths.
disable boolean	Disable Multipath. Choices: no yes
multiple_as boolean	Use paths received from different ASs. Choices: no yes
multiple_as_disable boolean	Disable multipath. Choices: no yes
set boolean	Set allow load sharing among multiple BGP paths. Choices: no yes
name string	Specify the name of the group
neighbors list / elements=dictionary	Specify list of neighbors.
accept_remote_nexthop boolean	Allow import policy to specify a non-directly connected next-hop. Choices: no yes
add_path_display_ipv4_address boolean	Display add-path path-id in IPv4 address format. Choices: no yes
advertise_bgp_static dictionary	Advertise bgp-static routes.
policy string	Specify static route advertisement policy.
set boolean	Set Advertise bgp-static routes. Choices: no yes
advertise_external dictionary	Advertise best external routes.
conditional boolean	Route matches active route upto med-comparison rule. Choices: no yes
set boolean	Set Advertise best external routes. Choices: no yes
advertise_inactive boolean	Advertise inactive routes. Choices: no yes
advertise_peer_as boolean	Advertise routes received from the same autonomous system. Choices: no yes
as_override boolean	Replace neighbor AS number with our AS number Choices: no yes
authentication_algorithm string	Specify authentication algorithm name. Choices: aes-128-cmac-96 hmac-sha-1-96 md5
authentication_key string	Specify MD5 authentication key.
authentication_key_chain string	Specify authentication key chain name.
bfd_liveness_detection dictionary	Bidirectional Forwarding Detection (BFD) options.
authentication dictionary	Authentication options.
algorithm string	Specify algorithm name. Choices: keyed-md5 keyed-sha-1 meticulous-keyed-md5 meticulous-keyed-sha-1 simple-password
key_chain string	Specify Key chain name.
loose_check boolean	Verify authentication only if authentication is negotiated. Choices: no yes
detection_time dictionary	Specify Detection-time optionss.
threshold integer	Specify high detection-time triggering a trap (milliseconds).
holddown_interval integer	Specify time to hold the session-UP notification to the client.
minimum_interval integer	Specify minimum transmit and receive interval.
minimum_receive_interval integer	Specify minimum receive interval.
multiplier integer	Specify detection time multiplier.
no_adaptation boolean	Disable adaptation. Choices: no yes
session_mode string	BFD single-hop or multihop session-mode. Choices: automatic multihop single-hop
transmit_interval dictionary	Transmit-interval options.
minimum_interval integer	Specify Minimum transmit interval.
threshold integer	Specify high transmit interval triggering a trap.
version string	Specify BFD protocol version number. Choices: 0 1 automatic
bgp_error_tolerance dictionary	Handle BGP malformed updates softly.
malformed_route_limit integer	Maximum number of malformed routes from a peer.
malformed_update_log_interval integer	Time used when logging malformed update.
no_malformed_route_limit boolean	Specify no malformed route limit. Choices: no yes
set boolean	Set BGP malformed updates softly. Choices: no yes
bmp dictionary	Specific settings to override the routing-options settings.
monitor boolean	Enable/Disable monitoring. Choices: no yes
route_monitoring dictionary	Control route monitoring settings.
none boolean	Do not send route montoring messages. Choices: no yes
post_policy boolean	Send post policy route montoring messages. Choices: no yes
post_policy_exclude_non_eligible boolean	Send post policy route montoring messages and exclude unresolved routes, etc. Choices: no yes
post_policy_exclude_non_feasible boolean	Send pre policy route montoring messages and exclude looped routes, etc. Choices: no yes
pre_policy boolean	Send pre policy route montoring messages. Choices: no yes
cluster_id string	Specify cluster identifier.
damping boolean	Enable route flap damping. Choices: no yes
description string	Specify neighbor description.
egress_te dictionary	Use Egress Peering traffic engineering.
backup_path string	The ‘egress-te-backup-paths template’ to use for this peer.
set boolean	Set the attribute. Choices: no yes
enforce_first_as boolean	Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP). Choices: no yes
export string	Specify export policy.
forwarding_context string	Specify routing-instance used for data-forwarding and transport-session.
graceful_restart dictionary	BGP graceful restart options.
disable boolean	Disable graceful restart. Choices: no yes
dont_help_shared_fate_bfd_down boolean	Honor BFD-Down(C=0) if GR-restart not in progress. Choices: no yes
forwarding_state_bit dictionary	Control forwarding-state flag negotiation.
as_rr_client boolean	As for a route reflector client. Choices: no yes
from_fib boolean	Always use state of associated FIB(s). Choices: no yes
long_lived dictionary	Long-lived graceful restart options.
advertise_to_non_llgr_neighbor dictionary	Advertise stale routes to non-LLGR neighbors.
omit_no_export boolean	Set Advertise stale routes to non-LLGR neighbors. Choices: no yes
set boolean	Set Advertise stale routes to non-LLGR neighbors. Choices: no yes
receiver_disable boolean	Disable receiver (helper) functionality. Choices: no yes
restart_time integer	Restart time used when negotiating with a peer.
set boolean	Set BGP graceful restart options. Choices: no yes
stale_routes_time integer	Maximum time for which stale routes are kept.
hold_time integer	Specify hold time used when negotiating with a peer.
idle_after_switch_over dictionary	Stop peer session from coming up after nonstop-routing switch-over.
forever boolean	Idle the peer until the user intervenes. Choices: no yes
timeout integer	Specify timeout value, in seconds, for starting peer after switch over.
import list / elements=string	Specify import policy.
include_mp_next_hop boolean	Include NEXT-HOP attribute in multiprotocol updates. Choices: no yes
ipsec_sa string	Specify IPSec SA name.
keep string	Specify how to retain routes in the routing table. Choices: all none
local_address string	Specify Address of local end of BGP session.
local_as dictionary	Local autonomous system number.
alias boolean	Treat this AS as an alias to the system AS. Choices: no yes
as_num string / required	Autonomous system number in plain number or (asdot notation) format.
loops integer	Maximum number of times this AS can be in an AS path.
no_prepend_global_as boolean	Maximum number of times this AS can be in an AS path. Choices: no yes
private boolean	Hide this local AS in paths learned from this peering. Choices: no yes
local_interface string	Specify Local interface for IPv6 link local EBGP peering.
local_preference string	Specify value of LOCAL_PREF path attribute.
log_updown boolean	Enable log a message for peer state transitions. Choices: no yes
metric_out dictionary	Specify route metric sent in MED.
igp dictionary	Track the IGP metric.
delay_med_update boolean	Delay updating MED when IGP metric increases. Choices: no yes
metric_offset integer	Specify metric offset for MED.
set boolean	Set track the IGP metric. Choices: no yes
metric_value integer	Specify metric value.
minimum_igp dictionary	Track the minimum IGP metric.
metric_offset integer	Specify metric offset for MED.
set boolean	Set track the minimum IGP metric. Choices: no yes
mtu_discovery boolean	Enable TCP path MTU discovery. Choices: no yes
multihop dictionary	Configure an EBGP multihop session.
no_nexthop_change boolean	Do not change next hop to self in advertisements. Choices: no yes
set boolean	Set an EBGP multihop session. Choices: no yes
ttl integer	TTL value for the session.
multipath dictionary	Allow load sharing among multiple BGP paths.
disable boolean	Disable Multipath. Choices: no yes
multiple_as boolean	Use paths received from different ASs. Choices: no yes
multiple_as_disable boolean	Disable multipath. Choices: no yes
set boolean	Set allow load sharing among multiple BGP paths. Choices: no yes
neighbor_address string	Specify neighbor address.
no_advertise_peer_as boolean	Allows to not advertise routes received from the same autonomous system. Choices: no yes
no_aggregator_id boolean	Set router ID in aggregator path attribute to 0. Choices: no yes
no_client_reflect boolean	Disable intracluster route redistribution. Choices: no yes
out_delay integer	Specify how long before exporting routes from routing table.
outbound_route_filter dictionary	Dynamically negotiated cooperative route filtering.
bgp_orf_cisco_mode boolean	Using BGP ORF capability code 130 and Prefix ORF type 128. Choices: no yes
prefix_based dictionary	Prefix-based outbound route filtering.
accept dictionary	Honor Prefix-based ORFs from remote peers.
inet boolean	Honor IPv4 prefix filters. Choices: no yes
inet6 boolean	Honor IPv6 prefix filters. Choices: no yes
set boolean	Set honor Prefix-based ORFs from remote peers. Choices: no yes
set boolean	Set prefix-based outbound route filtering. Choices: no yes
passive boolean	Specify to not send open messages to a peer. Choices: no yes
peer_as string	Specify Autonomous system number in plain number or ‘higher 16bits’.’Lower 16 bits’ format.
preference string	Specify preference value.
remove_private dictionary	Remove well-known private AS numbers.
all boolean	Remove all private AS numbers and do not stop at the first public AS number. Choices: no yes
all_replace boolean	Specify private AS replacement. Choices: no yes
all_replace_nearest boolean	Use closest public AS number to replace a private AS number. Choices: no yes
no_peer_loop_check boolean	Remove peer loop-check. Choices: no yes
set boolean	Remove well-known private AS numbers. Choices: no yes
rfc6514_compliant_safi129 boolean	Specify Compliance with RFC6514 SAFI129 format. Choices: no yes
route_server_client boolean	Enable route server client behavior. Choices: no yes
tcp_aggressive_transmission boolean	Enable aggressive transmission of pure TCP ACKs and retransmissions. Choices: no yes
tcp_mss integer	Specify maximum TCP segment size.
traceoptions dictionary	Configure trace options for BGP.
file dictionary	Specify trace file options.
filename string / required	Specify name of file in which to write trace information.
files integer	Specify maximum number of trace files.
no_world_readable boolean	Don’t allow any user to read the log file. Choices: no yes
size integer	Specify maximum trace file size.
world_readable boolean	Allow any user to read the log file. Choices: no yes
flag list / elements=dictionary	Specify tracing parameters.
detail boolean	Trace detailed information. Choices: no yes
disable boolean	Disable this trace flag. Choices: no yes
filter dictionary	Filter to apply to this flag.
match_on_prefix boolean	Specify filter based on prefix. Choices: no yes
policy string	Specify filter policy.
set boolean	Set filter to apply to this flag. Choices: no yes
name string / required	specify event name Choices: 4byte-as add-path all bfd damping egress-te general graceful-restart keepalive normal nsr-synchronization open packets policy refresh route state task thread-io thread-update-io timer update
receive boolean	Trace received packets. Choices: no yes
send boolean	Trace transmitted packets. Choices: no yes
ttl integer	Specify TTL value for the single-hop peer.
unconfigured_peer_graceful_restart boolean	Specify BGP unconfigured peer graceful restart options. Choices: no yes
vpn_apply_export boolean	Apply BGP export policy when exporting VPN routes. Choices: no yes
no_advertise_peer_as boolean	Allows to not advertise routes received from the same autonomous system. Choices: no yes
no_aggregator_id boolean	Set router ID in aggregator path attribute to 0. Choices: no yes
no_client_reflect boolean	Disable intracluster route redistribution. Choices: no yes
optimal_route_reflection dictionary	Enable optimal route reflection for this client group.
igp_backup string	Backup node identifier for this client group.
igp_primary string	Primary node identifier for this client group.
out_delay integer	Specify how long before exporting routes from routing table.
outbound_route_filter dictionary	Dynamically negotiated cooperative route filtering.
bgp_orf_cisco_mode boolean	Using BGP ORF capability code 130 and Prefix ORF type 128. Choices: no yes
prefix_based dictionary	Prefix-based outbound route filtering.
accept dictionary	Honor Prefix-based ORFs from remote peers.
inet boolean	Honor IPv4 prefix filters. Choices: no yes
inet6 boolean	Honor IPv6 prefix filters. Choices: no yes
set boolean	Set honor Prefix-based ORFs from remote peers. Choices: no yes
set boolean	Set prefix-based outbound route filtering. Choices: no yes
passive boolean	Specify to not send open messages to a peer. Choices: no yes
peer_as string	Specify Autonomous system number in plain number or ‘higher 16bits’.’Lower 16 bits’ format.
preference string	Specify preference value.
remove_private dictionary	Remove well-known private AS numbers.
all boolean	Remove all private AS numbers and do not stop at the first public AS number. Choices: no yes
all_replace boolean	Specify private AS replacement. Choices: no yes
all_replace_nearest boolean	Use closest public AS number to replace a private AS number. Choices: no yes
no_peer_loop_check boolean	Remove peer loop-check. Choices: no yes
set boolean	Remove well-known private AS numbers. Choices: no yes
rfc6514_compliant_safi129 boolean	Specify Compliance with RFC6514 SAFI129 format. Choices: no yes
route_server_client boolean	Enable route server client behavior. Choices: no yes
tcp_aggressive_transmission boolean	Enable aggressive transmission of pure TCP ACKs and retransmissions. Choices: no yes
tcp_mss integer	Specify maximum TCP segment size.
traceoptions dictionary	Configure trace options for BGP.
file dictionary	Specify trace file options.
filename string / required	Specify name of file in which to write trace information.
files integer	Specify maximum number of trace files.
no_world_readable boolean	Don’t allow any user to read the log file. Choices: no yes
size integer	Specify maximum trace file size.
world_readable boolean	Allow any user to read the log file. Choices: no yes
flag list / elements=dictionary	Specify tracing parameters.
detail boolean	Trace detailed information. Choices: no yes
disable boolean	Disable this trace flag. Choices: no yes
filter dictionary	Filter to apply to this flag.
match_on_prefix boolean	Specify filter based on prefix. Choices: no yes
policy string	Specify filter policy.
set boolean	Set filter to apply to this flag. Choices: no yes
name string / required	specify event name Choices: 4byte-as add-path all bfd damping egress-te general graceful-restart keepalive normal nsr-synchronization open packets policy refresh route state task thread-io thread-update-io timer update
receive boolean	Trace received packets. Choices: no yes
send boolean	Trace transmitted packets. Choices: no yes
ttl integer	Specify TTL value for the single-hop peer.
type string	Specify BGP group type. Choices: external internal
unconfigured_peer_graceful_restart boolean	Specify BGP unconfigured peer graceful restart options. Choices: no yes
vpn_apply_export boolean	Apply BGP export policy when exporting VPN routes. Choices: no yes
hold_time integer	Specify hold time used when negotiating with a peer.
holddown_all_stale_labels boolean	Hold all BGP stale-labels, facilating make-before-break for new label advertisements. Choices: no yes
idle_after_switch_over dictionary	Stop peer session from coming up after nonstop-routing switch-over.
forever boolean	Idle the peer until the user intervenes. Choices: no yes
timeout integer	Specify timeout value, in seconds, for starting peer after switch over.
import list / elements=string	Specify import policy.
include_mp_next_hop boolean	Include NEXT-HOP attribute in multiprotocol updates. Choices: no yes
ipsec_sa string	Specify IPSec SA name.
keep string	Specify how to retain routes in the routing table. Choices: all none
local_address string	Specify Address of local end of BGP session.
local_as dictionary	Local autonomous system number.
alias boolean	Treat this AS as an alias to the system AS. Choices: no yes
as_num string / required	Autonomous system number in plain number or (asdot notation) format.
loops integer	Maximum number of times this AS can be in an AS path.
no_prepend_global_as boolean	Maximum number of times this AS can be in an AS path. Choices: no yes
private boolean	Hide this local AS in paths learned from this peering. Choices: no yes
local_interface string	Specify Local interface for IPv6 link local EBGP peering.
local_preference string	Specify value of LOCAL_PREF path attribute.
log_updown boolean	Enable log a message for peer state transitions. Choices: no yes
loops integer	Specify maximum number of times this AS can be in an AS path.
metric_out dictionary	Specify route metric sent in MED.
igp dictionary	Track the IGP metric.
delay_med_update boolean	Delay updating MED when IGP metric increases. Choices: no yes
metric_offset integer	Specify metric offset for MED.
set boolean	Set track the IGP metric. Choices: no yes
metric_value integer	Specify metric value.
minimum_igp dictionary	Track the minimum IGP metric.
metric_offset integer	Specify metric offset for MED.
set boolean	Set track the minimum IGP metric. Choices: no yes
mtu_discovery boolean	Enable TCP path MTU discovery. Choices: no yes
multihop dictionary	Configure an EBGP multihop session.
no_nexthop_change boolean	Do not change next hop to self in advertisements. Choices: no yes
set boolean	Set an EBGP multihop session. Choices: no yes
ttl integer	TTL value for the session.
multipath dictionary	Allow load sharing among multiple BGP paths.
disable boolean	Disable Multipath. Choices: no yes
multiple_as boolean	Use paths received from different ASs. Choices: no yes
multiple_as_disable boolean	Disable multipath. Choices: no yes
set boolean	Set allow load sharing among multiple BGP paths. Choices: no yes
multipath_build_priority string	Configure the multipath build priority. Choices: low medium
no_advertise_peer_as boolean	Allows to not advertise routes received from the same autonomous system. Choices: no yes
no_aggregator_id boolean	Set router ID in aggregator path attribute to 0. Choices: no yes
no_client_reflect boolean	Disable intracluster route redistribution. Choices: no yes
no_precision_timers boolean	Specify not to use precision timers for scheduling keepalives. Choices: no yes
out_delay integer	Specify how long before exporting routes from routing table.
outbound_route_filter dictionary	Dynamically negotiated cooperative route filtering.
bgp_orf_cisco_mode boolean	Using BGP ORF capability code 130 and Prefix ORF type 128. Choices: no yes
prefix_based dictionary	Prefix-based outbound route filtering.
accept dictionary	Honor Prefix-based ORFs from remote peers.
inet boolean	Honor IPv4 prefix filters. Choices: no yes
inet6 boolean	Honor IPv6 prefix filters. Choices: no yes
set boolean	Set honor Prefix-based ORFs from remote peers. Choices: no yes
set boolean	Set prefix-based outbound route filtering. Choices: no yes
output_queue_priority dictionary	BGP output queue priority scheduler for updates.
defaults dictionary	Map policy’s priority class and BGP output-queue.
high dictionary	Assign the ‘high’ priority class to this output-queue.
expedited boolean	Expedited queue; highest priority. Choices: no yes
priority integer	Specify output queue priorit.
low dictionary	Assign the ‘low’ priority class to this output-queue.
expedited boolean	Expedited queue; highest priority. Choices: no yes
priority integer	Specify output queue priorit.
medium dictionary	Assign the ‘medium’ priority class to this output-queue.
expedited boolean	Expedited queue; highest priority. Choices: no yes
priority integer	Specify output queue priorit.
expedited_update_tokens integer	Expedited queue; highest priority for number of tokens.
priority_update_tokens list / elements=dictionary	Output queue priority; higher is better.
priority integer / required	Specify the priority.
update_tokens integer / required	Specify update_tokens.
passive boolean	Specify to not send open messages to a peer. Choices: no yes
path_selection dictionary	Configure path selection strategy.
always_compare_med boolean	Compare MED on paths from different AS. Choices: no yes
as_path_ignore boolean	Ignore AS path comparison during path selection. Choices: no yes
cisco_non_deterministic boolean	Use Cisco IOS nondeterministic path selection algorithm. Choices: no yes
external_router_id boolean	Compare router ID on BGP externals. Choices: no yes
l2vpn_use_bgp_rules boolean	Use standard BGP rules during L2VPN path selection. Choices: no yes
med_plus_igp dictionary	Add IGP cost to next-hop to MED before comparing MED values.
igp_multiplier integer	Specify multiplier for IGP cost to next-hop.
med_multiplier integer	Specify Multiplier for MED.
set boolean	Set med-plus-igp attribute. Choices: no yes
peer_as string	Specify Autonomous system number in plain number or ‘higher 16bits’.’Lower 16 bits’ format.
precision_timers boolean	Use precision timers for scheduling keepalives. Choices: no yes
preference string	Specify preference value.
remove_private dictionary	Remove well-known private AS numbers.
all boolean	Remove all private AS numbers and do not stop at the first public AS number. Choices: no yes
all_replace boolean	Specify private AS replacement. Choices: no yes
all_replace_nearest boolean	Use closest public AS number to replace a private AS number. Choices: no yes
no_peer_loop_check boolean	Remove peer loop-check. Choices: no yes
set boolean	Remove well-known private AS numbers. Choices: no yes
rfc6514_compliant_safi129 boolean	Specify Compliance with RFC6514 SAFI129 format. Choices: no yes
route_server_client boolean	Enable route server client behavior. Choices: no yes
send_addpath_optimization boolean	Enable BGP addpath advertisement optimization. Choices: no yes
snmp_options dictionary	Customize SNMP behaviors specifically for BGP MIBs.
backward_traps_only_from_established boolean	Limit traps for backward transitions to only those moving from Established state. Choices: no yes
emit_inet_address_length_in_oid boolean	Emit Length in OID for InetAddress MIB type. Choices: no yes
sr_preference_override string	Replace received segment routing traffic engineering preference value with override value.
stale_labels_holddown_period integer	Specify duration (sec) MPLS labels allocated by BGP are kept after they go stale.
tcp_aggressive_transmission boolean	Enable aggressive transmission of pure TCP ACKs and retransmissions. Choices: no yes
tcp_mss integer	Specify maximum TCP segment size.
traceoptions dictionary	Configure trace options for BGP.
file dictionary	Specify trace file options.
filename string / required	Specify name of file in which to write trace information.
files integer	Specify maximum number of trace files.
no_world_readable boolean	Don’t allow any user to read the log file. Choices: no yes
size integer	Specify maximum trace file size.
world_readable boolean	Allow any user to read the log file. Choices: no yes
flag list / elements=dictionary	Specify tracing parameters.
detail boolean	Trace detailed information. Choices: no yes
disable boolean	Disable this trace flag. Choices: no yes
filter dictionary	Filter to apply to this flag.
match_on_prefix boolean	Specify filter based on prefix. Choices: no yes
policy string	Specify filter policy.
set boolean	Set filter to apply to this flag. Choices: no yes
name string / required	specify event name Choices: 4byte-as add-path all bfd damping egress-te general graceful-restart keepalive normal nsr-synchronization open packets policy refresh route state task thread-io thread-update-io timer update
receive boolean	Trace received packets. Choices: no yes
send boolean	Trace transmitted packets. Choices: no yes
traffic_statistics_labeled_path dictionary	Collect periodic ingress labeled statistics for BGP label-switched paths.
file dictionary	Specify statistics file options.
filename string	Specify name of file in which to write trace information.
files integer	Specify maximum number of trace files.
no_world_readable boolean	Don’t allow any user to read the log file. Choices: no yes
size integer	Specify maximum trace file size.
world_readable boolean	Allow any user to read the log file. Choices: no yes
interval integer	Specify time interval to collect statistics.
ttl integer	Specify TTL value for the single-hop peer.
unconfigured_peer_graceful_restart boolean	Specify BGP unconfigured peer graceful restart options. Choices: no yes
vpn_apply_export boolean	Apply BGP export policy when exporting VPN routes. Choices: no yes
running_config string	This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show protocols bgp. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result
state string	The state the configuration should be left in. State purged removes all (routing-options autonomous-system, bgp global, bgp groups, bgp neighbors, bgp family and bgp group and neighbor family) the BGP configurations from the target device. Use caution with this state. State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context. Running states deleted and replaced will result in an error if there are address-family configuration lines present under a neighbor.Please use the junipernetworks.junos.junos_bgp_address_family modules for prior cleanup. Refer to examples for more details. Choices: purged merged ← (default) replaced deleted gathered parsed rendered

Notes 

Note

This module requires the netconf system service be enabled on the device being managed.
This module works with connection netconf. See the Junos OS Platform Options.
Tested against JunOS v18.4R1

Examples 

# Using merged
#
# Before state
# ------------
#
# admin# show protocols bgp
# [edit]

# admin# show routing-options autonomous-system
# [edit]

- name: Merge Junos BGP config
  junipernetworks.junos.junos_bgp_global:
    config:
      as_number: "65534"
      loops: 3
      asdot_notation: true
      accept_remote_nexthop: true
      add_path_display_ipv4_address: true
      advertise_bgp_static:
        policy: "static-to-bgp"
      advertise_from_main_vpn_tables: true
      advertise_inactive: true
      authentication_algorithm: "md5"
      bgp_error_tolerance:
        malformed_route_limit: 20000000
      bmp:
        monitor: true
      damping: true
      description: "This is configured with Junos_bgp resource module"
      egress_te_sid_stats: true
      hold_time: 5
      holddown_all_stale_labels: true
      include_mp_next_hop: true
      log_updown: true
      no_advertise_peer_as: true
      no_aggregator_id: true
      no_client_reflect: true
      out_delay: 10
      precision_timers: true
      preference: 2
    state: merged

# After state
# -----------
#
# admin# show routing-options autonomous-system
# 65534 loops 3 asdot-notation;

# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;


# Using merged
#
# Before state
# ------------
#
# admin# show routing-options autonomous-system
# 65534 loops 3 asdot-notation;

# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Update running Junos BGP config
  junipernetworks.junos.junos_bgp_global:
    config:
      egress_te_backup_paths:
        templates:
          - path_name: customer1
            peers:
              - '11.11.11.11'
              - '11.11.11.12'
              - '11.11.11.13'
            remote_nexthop: '2.2.2.2'
      groups:
        - name: 'internal'
          type: 'internal'
          vpn_apply_export: true
          out_delay: 30
          accept_remote_nexthop: true
          add_path_display_ipv4_address: true
          peer_as: '65534'
          allow:
            - 'all'
            - '1.1.1.0/24'
          neighbors:
            - neighbor_address: '11.11.11.11'
              peer_as: '65534'
              out_delay: 11
            - neighbor_address: '11.11.11.12'
              peer_as: '65534'
              out_delay: 12

        - name: 'external'
          out_delay: 20
          peer_as: '65534'
          accept_remote_nexthop: true
          add_path_display_ipv4_address: true
          neighbors:
            - neighbor_address: '12.12.12.12'
              peer_as: '65534'
              out_delay: 21
              accept_remote_nexthop: true
              add_path_display_ipv4_address: true
            - neighbor_address: '11.11.11.13'
              peer_as: '65534'
              out_delay: 31
              accept_remote_nexthop: true
              add_path_display_ipv4_address: true
    state: merged

# After state
# -----------
#
# admin# show routing-options autonomous-system
# 65534 loops 3 asdot-notation;

# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# egress-te-backup-paths {
#     template customer1 {
#         peer 11.11.11.11;
#         peer 11.11.11.12;
#         peer 11.11.11.13;
#         remote-nexthop {
#             2.2.2.2;
#         }
#     }
# }
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;
# group internal {
#     type internal;
#     accept-remote-nexthop;
#     out-delay 30;
#     vpn-apply-export;
#     peer-as 65534;
#     add-path-display-ipv4-address;
#     allow [ 0.0.0.0/0 1.1.1.0/24 ];
#     neighbor 11.11.11.11 {
#         out-delay 11;
#         peer-as 65534;
#     }
#     neighbor 11.11.11.12 {
#         out-delay 12;
#         peer-as 65534;
#     }
# }
# group external {
#     accept-remote-nexthop;
#     out-delay 20;
#     peer-as 65534;
#     add-path-display-ipv4-address;
#     neighbor 12.12.12.12 {
#         accept-remote-nexthop;
#         out-delay 21;
#         peer-as 65534;
#         add-path-display-ipv4-address;
#     }
#     neighbor 11.11.11.13 {
#         accept-remote-nexthop;
#         out-delay 31;
#         peer-as 65534;
#         add-path-display-ipv4-address;
#     }
# }


# Using replaced
#
# Before state
# ------------
#
# admin# show routing-options autonomous-system
# [edit]
# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Replace Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
   config:
     advertise_bgp_static:
       policy: "static-to-bgp"
     advertise_inactive: true
     authentication_algorithm: "md5"
     bfd_liveness_detection:
       minimum_receive_interval: 8
       multiplier: 30
       no_adaptation: true
       transmit_interval:
         minimum_interval: 4
       version: "automatic"
     bgp_error_tolerance:
       malformed_route_limit: 40000000
     description: "This is configured with Junos_bgp resource module replace"
     egress_te_sid_stats: true
     hold_time: 5
     out_delay: 10
     preference: "2"
   state: replaced

# After state
# -----------
#
# admin# show protocols bgp
# description "This is configured with Junos_bgp resource module replace";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

# admin# show routing-options autonomous-system
# [edit]

#
# Using deleted
#
# Before state
# ------------
#
# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;
# group internal {
#     out-delay 12;
# }
# admin# show routing-options autonomous-system
# 65534 loops 3 asdot-notation;

- name: Delete Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: deleted

# After state
# -----------
# admin# show protocols bgp
# group internal {
#     out-delay 12;
# }



# admin# show protocols bgp
# [edit]

# admin# show routing-options autonomous-system
# [edit]
# Using gathered
#
# Before state
# ------------
#
# admin# show protocols bgp
# description "This is configured with Junos_bgp resource module replace";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

- name: Gather Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#         "advertise_bgp_static": {
#             "policy": "static-to-bgp"
#         },
#         "advertise_inactive": true,
#         "authentication_algorithm": "md5",
#         "bfd_liveness_detection": {
#             "minimum_receive_interval": 8,
#             "multiplier": 30,
#             "no_adaptation": true,
#             "transmit_interval": {
#                 "minimum_interval": 4
#             },
#             "version": "automatic"
#         },
#         "bgp_error_tolerance": {
#             "malformed_route_limit": 40000000
#         },
#         "description": "This is configured with Junos_bgp resource module replace",
#         "egress_te_sid_stats": true,
#         "hold_time": 5,
#         "out_delay": 10,
#         "preference": "2"
#     }
#
#
# Using purged
#
# Before state
# ------------
#
# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;
# group internal {
#     out-delay 12;
# }
# admin# show routing-options autonomous-system
# 65534 loops 3 asdot-notation;

- name: Purge Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: purged

# After state
# ----------
# admin# show protocols bgp
#
# [edit]
# admin# show routing-options autonomous-system
#
#[edit]


# Using rendered
#
#
- name: Render the commands for provided  configuration
  junipernetworks.junos.junos_bgp_global:
    config:
      authentication_algorithm: "md5"
      bfd_liveness_detection:
        minimum_receive_interval: 4
        multiplier: 10
        no_adaptation: true
        transmit_interval:
          minimum_interval: 2
        version: "automatic"
      bgp_error_tolerance:
        malformed_route_limit: 20000000
      bmp:
        monitor: true
      damping: true
      description: "This is configured with Junos_bgp resource module"
      egress_te_sid_stats: true
      hold_time: 5
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": "
# <nc:protocols
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:bgp>
#         <nc:damping/>
#         <nc:egress-te-sid-stats/>
#         <nc:authentication-algorithm>md5</nc:authentication-algorithm>
#         <nc:description>This is configured with Junos_bgp resource module</nc:description>
#         <nc:hold-time>5</nc:hold-time>
#         <nc:bfd-liveness-detection>
#             <nc:transmit-interval>
#                 <nc:minimum-interval>2</nc:minimum-interval>
#             </nc:transmit-interval>
#             <nc:minimum-receive-interval>4</nc:minimum-receive-interval>
#             <nc:multiplier>10</nc:multiplier>
#             <nc:no-adaptation/>
#             <nc:version>automatic</nc:version>
#         </nc:bfd-liveness-detection>
#         <nc:bgp-error-tolerance>
#             <nc:malformed-route-limit>20000000</nc:malformed-route-limit>
#         </nc:bgp-error-tolerance>
#         <nc:bmp>
#             <nc:monitor>enable</nc:monitor>
#         </nc:bmp>
#     </nc:bgp>
# </nc:protocols>"
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#    <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#       <version>18.4R1-S2.4</version>
#       <protocols>
#          <bgp>
#             <precision-timers />
#             <advertise-from-main-vpn-tables />
#             <holddown-all-stale-labels />
#             <description>This is configured with Junos_bgp resource module</description>
#             <accept-remote-nexthop />
#             <preference>2</preference>
#             <hold-time>5</hold-time>
#             <advertise-inactive />
#             <no-advertise-peer-as />
#             <no-aggregator-id />
#             <out-delay>10</out-delay>
#             <log-updown />
#             <damping />
#             <bgp-error-tolerance>
#                <malformed-route-limit>20000000</malformed-route-limit>
#             </bgp-error-tolerance>
#             <authentication-algorithm>md5</authentication-algorithm>
#             <remove-private />
#             <no-client-reflect />
#             <include-mp-next-hop />
#             <bmp>
#                <monitor>disable</monitor>
#                <route-monitoring>
#                   <none />
#                </route-monitoring>
#             </bmp>
#             <advertise-bgp-static>
#                <policy>static-to-bgp</policy>
#             </advertise-bgp-static>
#             <add-path-display-ipv4-address />
#             <bfd-liveness-detection>
#                <version>automatic</version>
#                <minimum-receive-interval>4</minimum-receive-interval>
#                <multiplier>10</multiplier>
#                <no-adaptation />
#                <transmit-interval>
#                   <minimum-interval>2</minimum-interval>
#                </transmit-interval>
#                <detection-time>
#                   <threshold>300000</threshold>
#                </detection-time>
#             </bfd-liveness-detection>
#             <egress-te-sid-stats />
#             <group>
#                <name>internal</name>
#                <out-delay>8</out-delay>
#             </group>
#             <group>
#                <name>external</name>
#                <out-delay>9</out-delay>
#             </group>
#             <group>
#                <name>inboun</name>
#                <type>internal</type>
#             </group>
#             <group>
#                <name>ibgp</name>
#                <type>internal</type>
#                <local-address>10.2.2.2</local-address>
#                <export>static-to-bgp</export>
#                <neighbor>
#                   <name>10.1.1.1</name>
#                </neighbor>
#             </group>
#          </bgp>
#          <ospf3>
#             <area>
#                <name>0.0.0.100</name>
#                <stub>
#                   <default-metric>200</default-metric>
#                </stub>
#                <interface>
#                   <name>so-0/0/0.0</name>
#                   <metric>5</metric>
#                   <priority>3</priority>
#                </interface>
#             </area>
#          </ospf3>
#       </protocols>
#       <routing-options>
#          <static>
#             <route>
#                <name>172.16.17.0/24</name>
#                <discard />
#             </route>
#          </static>
#          <router-id>10.200.16.75</router-id>
#          <autonomous-system>
#             <as-number>65432</as-number>
#          </autonomous-system>
#       </routing-options>
#    </configuration>
# </rpc-reply>


- name: Parsed the device configuration to get output commands
  junipernetworks.junos.junos_bgp_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  {
#         "accept_remote_nexthop": true,
#         "add_path_display_ipv4_address": true,
#         "advertise_bgp_static": {
#             "policy": "static-to-bgp"
#         },
#         "advertise_from_main_vpn_tables": true,
#         "advertise_inactive": true,
#         "as_number": "65432",
#         "authentication_algorithm": "md5",
#         "bfd_liveness_detection": {
#             "detection_time": {
#                 "threshold": 300000
#             },
#             "minimum_receive_interval": 4,
#             "multiplier": 10,
#             "no_adaptation": true,
#             "transmit_interval": {
#                 "minimum_interval": 2
#             },
#             "version": "automatic"
#         },
#         "bgp_error_tolerance": {
#             "malformed_route_limit": 20000000
#         },
#         "bmp": {
#             "monitor": false,
#             "route_monitoring": {
#                 "none": true
#             }
#         },
#         "damping": true,
#         "description": "This is configured with Junos_bgp resource module",
#         "egress_te_sid_stats": true,
#         "hold_time": 5,
#         "holddown_all_stale_labels": true,
#         "include_mp_next_hop": true,
#         "log_updown": true,
#         "no_advertise_peer_as": true,
#         "no_aggregator_id": true,
#         "no_client_reflect": true,
#         "out_delay": 10,
#         "precision_timers": true,
#         "preference": "2"
#     }
#

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
before dictionary	The configuration prior to the model invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: [” \u003cnc:protocols xmlns:nc=\”urn:ietf:params:xml:ns:netconf:base:1.0\”\u003e \u003cnc:bgp\u003e \u003cnc:damping/\u003e \u003cnc:egress-te-sid-stats/\u003e \u003cnc:authentication-algorithm\u003emd5\u003c/nc:authentication-algorithm\u003e \u003cnc:description\u003eThis is configured with Junos_bgp resource module\u003c/nc:description\u003e \u003cnc:hold-time\u003e5\u003c/nc:hold-time\u003e \u003cnc:bfd-liveness-detection\u003e \u003cnc:transmit-interval\u003e \u003cnc:minimum-interval\u003e2\u003c/nc:minimum-interval\u003e \u003c/nc:transmit-interval\u003e \u003cnc:minimum-receive-interval\u003e4\u003c/nc:minimum-receive-interval\u003e \u003cnc:multiplier\u003e10\u003c/nc:multiplier\u003e \u003cnc:no-adaptation/\u003e \u003cnc:version\u003eautomatic\u003c/nc:version\u003e \u003c/nc:bfd-liveness-detection\u003e \u003cnc:bgp-error-tolerance\u003e \u003cnc:malformed-route-limit\u003e20000000\u003c/nc:malformed-route-limit\u003e \u003c/nc:bgp-error-tolerance\u003e \u003cnc:bmp\u003e \u003cnc:monitor\u003eenable\u003c/nc:monitor\u003e \u003c/nc:bmp\u003e \u003c/nc:bgp\u003e \u003c/nc:protocols\u003e”, “xml 2”, “xml 3”]

Authors

Rohit Thakur (@rohitthakur2590)

Collection links

Issue Tracker Repository (Sources)

junipernetworks.junos.junos_bgp_global module – Manages BGP Global configuration on devices running Juniper JUNOS.

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 