junipernetworks.junos.junos_lldp module – (deprecated, removed after 2022-06-01) Manage LLDP configuration on Juniper JUNOS network devices

Note

This module is part of the junipernetworks.junos collection (version 2.10.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_lldp.

New in version 1.0.0: of junipernetworks.junos

DEPRECATED

Removed in

major release after 2022-06-01

Why

Updated modules released with more functionality

Alternative

Use junipernetworks.junos.junos_lldp_global instead.

Synopsis

  • This module provides declarative management of LLDP service on Juniper JUNOS network devices.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.5.2)

Parameters

Parameter

Comments

active

boolean

Specifies whether or not the configuration is active or deactivated

Choices:

  • no

  • yes ← (default)

hold_multiplier

integer

Specify the number of seconds that LLDP information is held before it is discarded. The multiplier value is used in combination with the interval value.

interval

integer

Frequency at which LLDP advertisements are sent (in seconds).

provider

dictionary

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.

For more information please see the Junos OS Platform Options guide.

A dict object containing connection details.

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device.

ssh_keyfile

path

Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

transport

string

Configures the transport connection to use when connecting to the remote device.

Choices:

  • cli

  • netconf ← (default)

username

string

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

state

string

Value of present ensures given LLDP configuration is present on device and LLDP is enabled, for value of absent LLDP configuration is deleted and LLDP is in disabled state. Value enabled ensures LLDP protocol is enabled and LLDP configuration if any is configured on remote device, for value of disabled it ensures LLDP protocol is disabled any LLDP configuration if any is still present.

Choices:

  • present ← (default)

  • absent

  • enabled

  • disabled

transmit_delay

integer

Specify the number of seconds the device waits before sending advertisements to neighbors after a change is made in local system.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.

  • Recommended connection is netconf. See the Junos OS Platform Options.

  • This module also works with local connections for legacy playbooks.

  • For information on using CLI and netconf see the Junos OS Platform Options guide

  • For more information on using Ansible to manage network devices see the Ansible Network Guide

  • For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples

- name: Enable LLDP service
  junipernetworks.junos.junos_lldp:
    state: enabled

- name: Disable LLDP service
  junipernetworks.junos.junos_lldp:
    state: disabled

- name: Set LLDP parameters
  junipernetworks.junos.junos_lldp:
    interval: 10
    hold_multiplier: 5
    transmit_delay: 30
    state: present

- name: Delete LLDP parameters
  junipernetworks.junos.junos_lldp:
    interval: 10
    hold_multiplier: 5
    transmit_delay: 30
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

diff.prepared

string

Configuration difference before and after applying change.

Returned: when configuration is changed and diff option is enabled.

Sample: “[edit] + protocols { + lldp { + disable; + } + }\n”

Status

  • This module will be removed in a major release after 2022-06-01. [deprecated]

  • For more information see DEPRECATED.

Authors

  • Ganesh Nalawade (@ganeshrn)