junipernetworks.junos.junos_static_routes module – Static routes resource module

Note

This module is part of the junipernetworks.junos collection (version 2.10.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_static_routes.

New in version 1.0.0: of junipernetworks.junos

Synopsis

  • This module provides declarative management of static routes on Juniper JUNOS devices

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

  • xmltodict (>=0.12)

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of static routes options

address_families

list / elements=dictionary

Address family to use for the static routes

afi

string / required

afi to use for the static routes

Choices:

  • ipv4

  • ipv6

routes

list / elements=dictionary

Static route configuration

dest

string

Static route destination including prefix

metric

integer

Metric value for the static route

next_hop

list / elements=dictionary

Next hop to destination

forward_router_address

string

List of next hops

vrf

string

Virtual Routing and Forwarding (VRF) name

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the Junos device by executing the command show routing-options.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result

state

string

The state the configuration should be left in

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • gathered

  • rendered

  • parsed

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed.

  • This module works with connection netconf. See the Junos OS Platform Options.

  • Tested against JunOS v18.4R1

Examples

# Using deleted

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
#     route 10.200.16.75/24 next-hop 10.200.16.2;
# }

- name: Delete provided configuration (default operation is merge)
  junipernetworks.junos.junos_static_routes:
    config:
    - address_families:
      - afi: ipv4
        routes:
        - dest: 10.200.16.75/24
          next_hop:
          - forward_router_address: 10.200.16.2
    state: deleted

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

# Using merged

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Merge provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
    - address_families:
      - afi: ipv4
        routes:
        - dest: 10.200.16.75/24
          next_hop:
          - forward_router_address: 10.200.16.2
    state: merged

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
#     route 10.200.16.75/24 next-hop 10.200.16.2;
# }

# Using overridden

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.0.1;
# }

- name: Override provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
    - address_families:
      - afi: ipv4
        routes:
        - dest: 10.200.16.75/24
          next_hop:
          - forward_router_address: 10.200.16.2
    state: overridden

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 10.200.16.75/24 next-hop 10.200.16.2;
# }

# Using replaced

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Replace provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
    - address_families:
      - afi: ipv4
        routes:
        - dest: 192.168.47.0/24
          next_hop:
          - forward_router_address: 10.200.16.2
    state: replaced

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 10.200.16.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

string

The resulting configuration model invocation.

Returned: when changed

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

before

string

The configuration prior to the model invocation.

Returned: always

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“command 1”, “command 2”, “command 3”]

Authors

  • Daniel Mellado (@dmellado)