mellanox.onyx.onyx_l3_interface module – Manage L3 interfaces on Mellanox ONYX network devices

Note

This module is part of the mellanox.onyx collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_l3_interface.

Synopsis

  • This module provides declarative management of L3 interfaces on Mellanox ONYX network devices.

Parameters

Parameter

Comments

aggregate

string

List of L3 interfaces definitions

ipv4

string

IPv4 of the L3 interface.

ipv6

string

IPv6 of the L3 interface (not supported for now).

name

string

Name of the L3 interface.

purge

boolean

Purge L3 interfaces not defined in the aggregate parameter.

Choices:

  • no ← (default)

  • yes

state

string

State of the L3 interface configuration.

Choices:

  • present ← (default)

  • absent

Examples

- name: Set Eth1/1 IPv4 address
  onyx_l3_interface:
    name: Eth1/1
    ipv4: 192.168.0.1/24

- name: Remove Eth1/1 IPv4 address
  onyx_l3_interface:
    name: Eth1/1
    state: absent

- name: Set IP addresses on aggregate
  onyx_l3_interface:
    aggregate:
      - { name: Eth1/1, ipv4: 192.168.2.10/24 }
      - { name: Eth1/2, ipv4: 192.168.3.10/24 }

- name: Remove IP addresses on aggregate
  onyx_l3_interface:
    aggregate:
      - { name: Eth1/1, ipv4: 192.168.2.10/24 }
      - { name: Eth1/2, ipv4: 192.168.3.10/24 }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

The list of configuration mode commands to send to the device

Returned: always.

Sample: [“interfaces ethernet 1/1 ip address 192.168.0.1 /24”]

Authors

  • Samer Deeb (@samerd)