netapp.elementsw.na_elementsw_cluster_snmp module – Configure Element SW Cluster SNMP

Note

This module is part of the netapp.elementsw collection (version 21.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.elementsw.

To use it in a playbook, specify: netapp.elementsw.na_elementsw_cluster_snmp.

New in version 2.8.0: of netapp.elementsw

Synopsis

  • Configure Element Software cluster SNMP.

Requirements

The below requirements are needed on the host that executes this module.

  • The modules were developed with SolidFire 10.1

  • solidfire-sdk-python (1.1.0.92) or greater. Install using ‘pip install solidfire-sdk-python’

Parameters

Parameter

Comments

hostname

string / required

The hostname or IP address of the SolidFire cluster.

For na_elementsw_cluster, the Management IP (MIP) or hostname of the node to initiate the cluster creation from.

networks

dictionary

List of networks and what type of access they have to the SNMP servers running on the cluster nodes.

This parameter is required if SNMP v3 is disabled.

access

string

ro for read-only access.

rw for read-write access.

rosys for read-only access to a restricted set of system information.

Choices:

  • ro

  • rw

  • rosys

cidr

integer

A CIDR network mask. This network mask must be an integer greater than or equal to 0, and less than or equal to 32. It must also not be equal to 31.

community

string

SNMP community string.

network

string

This parameter along with the cidr variable is used to control which network the access and community string apply to.

The special value of ‘default’ is used to specify an entry that applies to all networks.

The cidr mask is ignored when network value is either a host name or default.

password

aliases: pass

string / required

Password for the specified user.

snmp_v3_enabled

boolean

Which version of SNMP has to be enabled.

Choices:

  • no

  • yes

state

string

This module enables you to enable SNMP on cluster nodes. When you enable SNMP, the action applies to all nodes in the cluster, and the values that are passed replace, in whole, all values set in any previous call to this module.

Choices:

  • present ← (default)

  • absent

username

aliases: user

string / required

Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID%3D62636%26language%3Den-US.

usm_users

dictionary

List of users and the type of access they have to the SNMP servers running on the cluster nodes.

This parameter is required if SNMP v3 is enabled.

access

string

rouser for read-only access.

rwuser for read-write access.

rosys for read-only access to a restricted set of system information.

Choices:

  • rouser

  • rwuser

  • rosys

name

string

The name of the user. Must contain at least one character, but no more than 32 characters.

Blank spaces are not allowed.

passphrase

string

The passphrase of the user. Must be between 8 and 255 characters long (inclusive).

Blank spaces are not allowed.

Required if ‘secLevel’ is ‘priv.’

password

string

The password of the user. Must be between 8 and 255 characters long (inclusive).

Blank spaces are not allowed.

Required if ‘secLevel’ is ‘auth’ or ‘priv.’

secLevel

string

To define the security level of a user.

Choices:

  • noauth

  • auth

  • priv

Notes

Note

  • The modules prefixed with na\_elementsw are built to support the SolidFire storage platform.

Examples

- name: configure SnmpNetwork
  tags:
  - elementsw_cluster_snmp
  na_elementsw_cluster_snmp:
    hostname: "{{ elementsw_hostname }}"
    username: "{{ elementsw_username }}"
    password: "{{ elementsw_password }}"
    state: present
    snmp_v3_enabled: True
    usm_users:
      access: rouser
      name: testuser
      password: ChangeMe123
      passphrase: ChangeMe123
      secLevel: auth
    networks:
      access: ro
      cidr: 24
      community: TestNetwork
      network: 192.168.0.1

- name: Disable SnmpNetwork
  tags:
  - elementsw_cluster_snmp
  na_elementsw_cluster_snmp:
    hostname: "{{ elementsw_hostname }}"
    username: "{{ elementsw_username }}"
    password: "{{ elementsw_password }}"
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

msg

string

Success message

Returned: success

Authors

  • NetApp Ansible Team (@carchi8py)