You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

netapp.elementsw.na_elementsw_network_interfaces module – NetApp Element Software Configure Node Network Interfaces

Note

This module is part of the netapp.elementsw collection (version 21.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.elementsw.

To use it in a playbook, specify: netapp.elementsw.na_elementsw_network_interfaces.

New in version 2.7.0: of netapp.elementsw

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis 

Configure Element SW Node Network Interfaces for Bond 1G and 10G IP addresses.
This module does not create interfaces, it expects the interfaces to already exists and can only modify them.
This module cannot set or modify the method (Loopback, manual, dhcp, static).
This module is not idempotent and does not support check_mode.

Requirements 

The below requirements are needed on the host that executes this module.

The modules were developed with SolidFire 10.1
solidfire-sdk-python (1.1.0.92) or greater. Install using ‘pip install solidfire-sdk-python’

Parameters 

Parameter	Comments
bond_10g dictionary	settings for the Bond10G interface.
address string	IP address for the interface.
bond_lacp_rate string	Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. Choices: Fast Slow
bond_mode string	Bonding mode. Choices: ActivePassive ALB LACP
dns_nameservers list / elements=string	List of addresses for domain name servers.
dns_search list / elements=string	List of DNS search domains.
gateway string	IP router network address to send packets out of the local network.
mtu string	The largest packet size (in bytes) that the interface can transmit.. Must be greater than or equal to 1500 bytes.
netmask string	subnet mask for the interface.
virtual_network_tag string	The virtual network identifier of the interface (VLAN tag).
bond_1g dictionary	settings for the Bond1G interface.
address string	IP address for the interface.
bond_lacp_rate string	Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. Choices: Fast Slow
bond_mode string	Bonding mode. Choices: ActivePassive ALB LACP
dns_nameservers list / elements=string	List of addresses for domain name servers.
dns_search list / elements=string	List of DNS search domains.
gateway string	IP router network address to send packets out of the local network.
mtu string	The largest packet size (in bytes) that the interface can transmit.. Must be greater than or equal to 1500 bytes.
netmask string	subnet mask for the interface.
virtual_network_tag string	The virtual network identifier of the interface (VLAN tag).
bond_mode_10g string	deprecated, use bond_10g option.
bond_mode_1g string	deprecated, use bond_1g option.
dns_nameservers list / elements=string	deprecated, use bond_1g and bond_10g options.
dns_search_domains list / elements=string	deprecated, use bond_1g and bond_10g options.
gateway_address_10g string	deprecated, use bond_10g option.
gateway_address_1g string	deprecated, use bond_1g option.
hostname string / required	The hostname or IP address of the SolidFire cluster. For na_elementsw_cluster, the Management IP (MIP) or hostname of the node to initiate the cluster creation from.
ip_address_10g string	deprecated, use bond_10g option.
ip_address_1g string	deprecated, use bond_1g option.
lacp_10g string	deprecated, use bond_10g option.
lacp_1g string	deprecated, use bond_1g option.
method string	deprecated, this option would trigger a ‘updated failed’ error
mtu_10g string	deprecated, use bond_10g option.
mtu_1g string	deprecated, use bond_1g option.
password aliases: pass string / required	Password for the specified user.
subnet_10g string	deprecated, use bond_10g option.
subnet_1g string	deprecated, use bond_1g option.
username aliases: user string / required	Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID%3D62636%26language%3Den-US.
virtual_network_tag string	deprecated, use bond_1g and bond_10g options.

Notes 

Note

The modules prefixed with na\_elementsw are built to support the SolidFire storage platform.

Examples 

- name: Set Node network interfaces configuration for Bond 1G and 10G properties
  tags:
  - elementsw_network_interfaces
  na_elementsw_network_interfaces:
    hostname: "{{ elementsw_hostname }}"
    username: "{{ elementsw_username }}"
    password: "{{ elementsw_password }}"
    bond_1g:
      address: 10.253.168.131
      netmask: 255.255.248.0
      gateway: 10.253.168.1
      mtu: '1500'
      bond_mode: ActivePassive
      dns_nameservers: dns1,dns2
      dns_search: domain1,domain2
    bond_10g:
      address: 10.253.1.202
      netmask: 255.255.255.192
      gateway: 10.253.1.193
      mtu: '9000'
      bond_mode: LACP
      bond_lacp_rate: Fast
      virtual_network_tag: vnet_tag

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
msg string	Success message Returned: success

Authors

NetApp Ansible Team (@carchi8py)

Collection links

Issue Tracker Homepage Repository (Sources)

netapp.elementsw.na_elementsw_network_interfaces module – NetApp Element Software Configure Node Network Interfaces

Synopsis

Requirements

Parameters

Notes

Examples

Return Values