netapp.ontap.na_ontap_net_subnet module – NetApp ONTAP Create, delete, modify network subnets.

Note

This module is part of the netapp.ontap collection (version 21.20.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_net_subnet.

New in version 2.8.0: of netapp.ontap

Synopsis

  • Create, modify, destroy the network subnet

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.

  • REST support requires ONTAP 9.6 or later.

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter

Comments

broadcast_domain

string

Specify the required broadcast_domain name for the subnet.

A broadcast domain can not be modified after the subnet has been created

cert_filepath

string

added in 20.6.0 of netapp.ontap

path to SSL client cert file (.pem).

not supported with python 2.6.

feature_flags

dictionary

added in 20.5.0 of netapp.ontap

Enable or disable a new feature.

This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.

Supported keys and values are subject to change without notice. Unknown keys are ignored.

from_name

string

Name of the subnet to be renamed

gateway

string

Specify the gateway for the default route of the subnet.

hostname

string / required

The hostname or IP address of the ONTAP instance.

http_port

integer

Override the default port (80 or 443) with this port

https

boolean

Enable and disable https.

Ignored when using REST as only https is supported.

Ignored when using SSL certificate authentication as it requires SSL.

Choices:

  • no ← (default)

  • yes

ip_ranges

list / elements=string

Specify the list of IP address ranges associated with the subnet.

ipspace

string

Specify the ipspace for the subnet.

The default value for this parameter is the default IPspace, named ‘Default’.

key_filepath

string

added in 20.6.0 of netapp.ontap

path to SSL client key file.

name

string / required

Specify the subnet name.

ontapi

integer

The ontap api version to use

password

aliases: pass

string

Password for the specified user.

state

string

Whether the specified network interface group should exist or not.

Choices:

  • present ← (default)

  • absent

subnet

string

Specify the subnet (ip and mask).

use_rest

string

Whether to use REST or ZAPI.

always – will always use the REST API if the module supports REST. A warning is issued if the module does not support REST. An error is issued if a module option is not supported in REST.

never – will always use ZAPI if the module supports ZAPI. An error may be issued if a REST option is not supported in ZAPI.

auto – will try to use the REST API if the module supports REST and modules options are supported. Reverts to ZAPI otherwise.

Default: “auto”

username

aliases: user

string

This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.

For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

Two authentication methods are supported

  1. basic authentication, using username and password,

  2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.

To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

validate_certs

boolean

If set to no, the SSL certificates will not be validated.

This should only set to False used on personally controlled sites using self-signed certificates.

Choices:

  • no

  • yes ← (default)

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: create subnet
  netapp.ontap.na_ontap_net_subnet:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    subnet: 10.10.10.0/24
    name: subnet-adm
    ip_ranges: [ '10.10.10.30-10.10.10.40', '10.10.10.51' ]
    gateway: 10.10.10.254
    ipspace: Default
    broadcast_domain: Default
- name: delete subnet
  netapp.ontap.na_ontap_net_subnet:
    state: absent
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: subnet-adm
    ipspace: Default
- name: rename subnet
  netapp.ontap.na_ontap_net_subnet:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: subnet-adm-new
    from_name: subnet-adm
    ipspace: Default

Authors

  • Storage Engineering (@Albinpopote)