arista.eos.eos_ospf_interfaces module – OSPF Interfaces Resource Module.

Note

This module is part of the arista.eos collection (version 5.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ospf_interfaces.

New in arista.eos 1.1.0

Synopsis

  • This module manages OSPF configuration of interfaces on devices running Arista EOS.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of OSPF configuration for interfaces.

address_family

list / elements=dictionary

OSPF settings on the interfaces in address-family context.

afi

string / required

Address Family Identifier (AFI) for OSPF settings on the interfaces.

Choices:

  • "ipv4"

  • "ipv6"

area

dictionary

Area associated with interface.

Valid only when afi = ipv4.

area_id

string / required

Area ID as a decimal or IP address format.

authentication_key

dictionary

Configure the authentication key for the interface.

Valid only when afi = ipv4.

encryption

string

0 Specifies an UNENCRYPTED authentication key will follow.

7 Specifies a proprietry encryption type.`

key

string

password (up to 8 chars).

authentication_v2

dictionary

Authentication settings on the interface.

Valid only when afi = ipv4.

message_digest

boolean

Use message-digest authentication.

Choices:

  • false

  • true

set

boolean

Enable authentication on the interface.

Choices:

  • false

  • true

authentication_v3

dictionary

Authentication settings on the interface.

Valid only when afi = ipv6.

algorithm

string

Encryption alsgorithm.

Choices:

  • "md5"

  • "sha1"

key

string

128 bit MD5 key or 140 bit SHA1 key.

keytype

string

Specifies if an unencrypted/hidden follows.

0 denotes unencrypted key.

7 denotes hidden key.

passphrase

string

Passphrase String for deriving keys for authentication and encryption.

spi

integer

IPsec Security Parameter Index.

bfd

boolean

Enable BFD.

Choices:

  • false

  • true

cost

integer

metric associated with interface.

dead_interval

integer

Time interval to detect a dead router.

encryption_v3

dictionary

Authentication settings on the interface.

Valid only when afi = ipv6.

algorithm

string

algorithm.

Choices:

  • "md5"

  • "sha1"

encryption

string

encryption type.

Choices:

  • "3des-cbc"

  • "aes-128-cbc"

  • "aes-192-cbc"

  • "aes-256-cbc"

  • "null"

key

string

key

keytype

string

Specifies if an unencrypted/hidden follows.

0 denotes unencrypted key.

7 denotes hidden key.

passphrase

string

Passphrase String for deriving keys for authentication and encryption.

spi

integer

IPsec Security Parameter Index.

hello_interval

integer

Timer interval between transmission of hello packets.

ip_params

list / elements=dictionary

Specify parameters for IPv4/IPv6.

Valid only when afi = ipv6.

afi

string / required

Address Family Identifier (AFI) for OSPF settings on the interfaces.

Choices:

  • "ipv4"

  • "ipv6"

area

dictionary

Area associated with interface.

Valid only when afi = ipv4.

area_id

string / required

Area ID as a decimal or IP address format.

bfd

boolean

Enable BFD.

Choices:

  • false

  • true

cost

integer

metric associated with interface.

dead_interval

integer

Time interval to detect a dead router.

hello_interval

integer

Timer interval between transmission of hello packets.

mtu_ignore

boolean

if True, Disable MTU check for Database Description packets.

Choices:

  • false

  • true

network

string

Interface type.

passive_interface

boolean

Suppress routing updates in an interface.

Choices:

  • false

  • true

priority

integer

Interface priority.

retransmit_interval

integer

LSA retransmission interval.

transmit_delay

integer

LSA transmission delay.

message_digest_key

dictionary

Message digest authentication password (key) settings.

encryption

string

0 Specifies an UNENCRYPTED ospf password (key) will follow.

7 Specifies a proprietry encryption type.

key

string

Authentication key (upto 16 chars).

key_id

integer

Key ID.

mtu_ignore

boolean

if True, Disable MTU check for Database Description packets.

Choices:

  • false

  • true

network

string

Interface type.

passive_interface

boolean

Suppress routing updates in an interface.

Valid only when afi = ipv6.

Choices:

  • false

  • true

priority

integer

Interface priority.

retransmit_interval

integer

LSA retransmission interval.

shutdown

boolean

Shutdown OSPF on this interface.

Choices:

  • false

  • true

transmit_delay

integer

LSA transmission delay.

name

string

Name/Identifier of the interface.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the EOS device by executing the command show running-config | section interface.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Examples

# Using merged

# Before state

# veos(config)#show running-config | section interface | ospf
# veos(config)#

  - name: Merge provided configuration with device configuration
    arista.eos.eos_ospf_interfaces:
      config:
        - name: "Vlan1"
          address_family:
            - afi: "ipv4"
              area:
                area_id: "0.0.0.50"
              cost: 500
              mtu_ignore: True
            - afi: "ipv6"
              dead_interval: 44
              ip_params:
                - afi: "ipv6"
                  mtu_ignore: True
                  network: "point-to-point"
      state: merged

# After State

# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf cost 500
#    ip ospf mtu-ignore
#    ip ospf area 0.0.0.50
#    ospfv3 dead-interval 44
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# veos(config)#
#
#
# Module Execution:
#
#   "after": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "area": {
#                         "area_id": "0.0.0.50"
#                     },
#                     "cost": 500,
#                     "mtu_ignore": True
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 44,
#                     "ip_params": [
#                         {
#                             "afi": "ipv6",
#                             "mtu_ignore": True,
#                             "network": "point-to-point"
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan1"
#         }
#     ],
#     "before": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         }
#     ],
#     "changed": True,
#     "commands": [
#         "interface Vlan1",
#         "ip ospf area 0.0.0.50",
#         "ip ospf cost 500",
#         "ip ospf mtu-ignore",
#         "ospfv3 dead-interval 44",
#         "ospfv3 ipv6 mtu-ignore",
#         "ospfv3 ipv6 network point-to-point"
#     ],
#

# Using replaced
#---------------

# Before State:

# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf cost 500
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ip ospf area 0.0.0.50
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 dead-interval 44
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
# veos(config)#


  - name: Replace device configuration with provided configuration
    arista.eos.eos_ospf_interfaces:
      config:
        - name: "Vlan1"
          address_family:
            - afi: "ipv6"
              cost: 44
              bfd: True
              ip_params:
                - afi: "ipv6"
                  mtu_ignore: True
                  network: "point-to-point"
                  dead_interval: 56
      state: replaced

# After State:

# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ospfv3 bfd
#    ospfv3 cost 44
#    no ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
# veos(config)#
#
# Module Execution:
#
# "after": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "bfd": True,
#                     "cost": 44,
#                     "ip_params": [
#                         {
#                             "afi": "ipv6",
#                             "mtu_ignore": True,
#                             "network": "point-to-point"
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ],
#     "before": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "area": {
#                         "area_id": "0.0.0.50"
#                     },
#                     "cost": 500,
#                     "dead_interval": 29,
#                     "hello_interval": 66,
#                     "mtu_ignore": True
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 106,
#                     "dead_interval": 44,
#                     "hello_interval": 77,
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.5"
#                             },
#                             "priority": 45
#                         },
#                         {
#                             "afi": "ipv6",
#                             "mtu_ignore": True,
#                             "network": "point-to-point",
#                             "passive_interface": True,
#                             "retransmit_interval": 115
#                         }
#                     ],
#                     "transmit_delay": 100
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ],
#     "changed": True,
#     "commands": [
#         "interface Vlan1",
#         "no ip ospf cost 500",
#         "no ip ospf dead-interval 29",
#         "no ip ospf hello-interval 66",
#         "no ip ospf mtu-ignore",
#         "no ip ospf area 0.0.0.50",
#         "ospfv3 cost 44",
#         "ospfv3 bfd",
#         "ospfv3 authentication ipsec spi 30 md5 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==",
#         "no ospfv3 ipv4 priority 45",
#         "no ospfv3 ipv4 area 0.0.0.5",
#         "ospfv3 ipv6 dead-interval 56",
#         "no ospfv3 ipv6 passive-interface",
#         "no ospfv3 ipv6 retransmit-interval 115",
#         "no ospfv3 hello-interval 77",
#         "no ospfv3 dead-interval 44",
#         "no ospfv3 transmit-delay 100"
#     ],
#

# Using overidden:
# ----------------

# Before State:
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ospfv3 bfd
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
# veos(config)#

  - name: Override device configuration with provided configuration
    arista.eos.eos_ospf_interfaces:
      config:
        - name: "Vlan1"
          address_family:
            - afi: "ipv6"
              cost: 44
              bfd: True
              ip_params:
                - afi: "ipv6"
                  mtu_ignore: True
                  network: "point-to-point"
                  dead_interval: 56
      state: overridden

# After State:

# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ospfv3 bfd
#    ospfv3 cost 44
#    no ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# veos(config)#
#
#
# Module Execution:
#
#  "after": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "bfd": True,
#                     "cost": 44,
#                     "ip_params": [
#                         {
#                             "afi": "ipv6",
#                             "dead_interval": 56,
#                             "mtu_ignore": True,
#                             "network": "point-to-point"
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "name": "Vlan2"
#         }
#     ],
#     "before": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "dead_interval": 29,
#                     "hello_interval": 66,
#                     "mtu_ignore": True
#                 },
#                 {
#                     "afi": "ipv6",
#                     "bfd": True,
#                     "cost": 106,
#                     "hello_interval": 77,
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.5"
#                             },
#                             "priority": 45
#                         },
#                         {
#                             "afi": "ipv6",
#                             "dead_interval": 56,
#                             "mtu_ignore": True,
#                             "network": "point-to-point",
#                             "passive_interface": True,
#                             "retransmit_interval": 115
#                         }
#                     ],
#                     "transmit_delay": 100
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ],
#     "changed": True,
#     "commands": [
#         "interface Vlan2",
#         "no ospfv3 ipv4 hello-interval 45",
#         "no ospfv3 ipv4 retransmit-interval 100",
#         "no ospfv3 ipv4 area 0.0.0.6",
#         "interface Vlan1",
#         "no ip ospf dead-interval 29",
#         "no ip ospf hello-interval 66",
#         "no ip ospf mtu-ignore",
#         "ospfv3 cost 44",
#         "ospfv3 authentication ipsec spi 30 md5 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==",
#         "no ospfv3 ipv4 priority 45",
#         "no ospfv3 ipv4 area 0.0.0.5",
#         "no ospfv3 ipv6 passive-interface",
#         "no ospfv3 ipv6 retransmit-interval 115",
#         "no ospfv3 hello-interval 77",
#         "no ospfv3 transmit-delay 100"
#     ],
#

# Using deleted:
#--------------

# before State:

# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ospfv3 bfd
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
# veos(config)#

  - name: Delete device configuration
    arista.eos.eos_ospf_interfaces:
      config:
        - name: "Vlan1"
      state: deleted

# After State:

# veos#show running-config | section interface | ospf
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
#
# Module Execution:
#
# "after": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ],
#     "before": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "dead_interval": 29,
#                     "hello_interval": 66,
#                     "mtu_ignore": True
#                 },
#                 {
#                     "afi": "ipv6",
#                     "bfd": True,
#                     "cost": 106,
#                     "hello_interval": 77,
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.5"
#                             },
#                             "priority": 45
#                         },
#                         {
#                             "afi": "ipv6",
#                             "dead_interval": 56,
#                             "mtu_ignore": True,
#                             "network": "point-to-point",
#                             "passive_interface": True,
#                             "retransmit_interval": 115
#                         }
#                     ],
#                     "transmit_delay": 100
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ],
#     "changed": True,
#     "commands": [
#         "interface Vlan1",
#         "no ip ospf dead-interval 29",
#         "no ip ospf hello-interval 66",
#         "no ip ospf mtu-ignore",
#         "no ospfv3 bfd",
#         "no ospfv3 cost 106",
#         "no ospfv3 hello-interval 77",
#         "no ospfv3 transmit-delay 100",
#         "no ospfv3 ipv4 priority 45",
#         "no ospfv3 ipv4 area 0.0.0.5",
#         "no ospfv3 ipv6 passive-interface",
#         "no ospfv3 ipv6 dead-interval 56",
#         "no ospfv3 ipv6 retransmit-interval 115",
#         "no ospfv3 ipv6 network point-to-point",
#         "no ospfv3 ipv6 mtu-ignore"
#     ],
#

# Using parsed:
# ------------

# parsed.cfg:
# ----------

# interface Vlan1
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ip ospf cost 500
#    ospfv3 bfd
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
#

  - name: parse configs
    arista.eos.eos_ospf_interfaces:
      running_config: "{{ lookup('file', './parsed.cfg') }}"
      state: parsed

# Module Execution:
# "parsed": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 500,
#                     "dead_interval": 29,
#                     "hello_interval": 66,
#                     "mtu_ignore": True
#                 },
#                 {
#                     "afi": "ipv6",
#                     "bfd": True,
#                     "cost": 106,
#                     "hello_interval": 77,
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.5"
#                             },
#                             "priority": 45
#                         },
#                         {
#                             "afi": "ipv6",
#                             "dead_interval": 56,
#                             "mtu_ignore": True,
#                             "network": "point-to-point",
#                             "passive_interface": True,
#                             "retransmit_interval": 115
#                         }
#                     ],
#                     "transmit_delay": 100
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ]

# Using gathered:

# Device COnfig:

# veos#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf cost 500
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ip ospf area 0.0.0.50
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
# veos#

  - name: gather configs
    arista.eos.eos_ospf_interfaces:
      state: gathered

# Module Execution:
#
#  "gathered": [
#         {
#             "name": "Ethernet1"
#         },
#         {
#             "name": "Ethernet2"
#         },
#         {
#             "name": "Management1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "area": {
#                         "area_id": "0.0.0.50"
#                     },
#                     "cost": 500,
#                     "dead_interval": 29,
#                     "hello_interval": 66,
#                     "mtu_ignore": True
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 106,
#                     "hello_interval": 77,
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.5"
#                             },
#                             "priority": 45
#                         },
#                         {
#                             "afi": "ipv6",
#                             "dead_interval": 56,
#                             "mtu_ignore": True,
#                             "network": "point-to-point",
#                             "passive_interface": True,
#                             "retransmit_interval": 115
#                         }
#                     ],
#                     "transmit_delay": 100
#                 }
#             ],
#             "name": "Vlan1"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "ip_params": [
#                         {
#                             "afi": "ipv4",
#                             "area": {
#                                 "area_id": "0.0.0.6"
#                             },
#                             "hello_interval": 45,
#                             "retransmit_interval": 100
#                         }
#                     ]
#                 }
#             ],
#             "name": "Vlan2"
#         }
#     ],
#


# Using rendered:
# --------------

  - name: Render provided configuration
    arista.eos.eos_ospf_interfaces:
      config:
        - name: "Vlan1"
          address_family:
            - afi: "ipv4"
              dead_interval: 29
              mtu_ignore: True
              hello_interval: 66
            - afi: "ipv6"
              hello_interval: 77
              cost : 106
              transmit_delay: 100
              ip_params:
                - afi: "ipv6"
                  retransmit_interval: 115
                  dead_interval: 56
                  passive_interface: True
                - afi: "ipv4"
                  area:
                    area_id: "0.0.0.5"
                  priority: 45
        - name: "Vlan2"
          address_family:
            - afi: "ipv6"
              ip_params:
                - afi: "ipv4"
                  area:
                    area_id: "0.0.0.6"
                  hello_interval: 45
                  retransmit_interval: 100
            - afi: "ipv4"
              message_digest_key:
                key_id: 200
                encryption: 7
                key: "hkdfhtu=="

      state: rendered

# Module Execution:
#
# "rendered": [
#         "interface Vlan1",
#         "ip ospf dead-interval 29",
#         "ip ospf mtu-ignore",
#         "ip ospf hello-interval 66",
#         "ospfv3 hello-interval 77",
#         "ospfv3 cost 106",
#         "ospfv3 transmit-delay 100",
#         "ospfv3 ipv4 area 0.0.0.5",
#         "ospfv3 ipv4 priority 45",
#         "ospfv3 ipv6 retransmit-interval 115",
#         "ospfv3 ipv6 dead-interval 56",
#         "ospfv3 ipv6 passive-interface",
#         "interface Vlan2",
#         "ip ospf message-digest-key 200 md5 7 hkdfhtu==",
#         "ospfv3 ipv4 area 0.0.0.6",
#         "ospfv3 ipv4 hello-interval 45",
#         "ospfv3 ipv4 retransmit-interval 100"
#     ]
#

Authors

  • Gomathi Selvi Srinivasan (@GomathiselviS)