arista.eos.eos_ospfv3 module – OSPFv3 resource module

Note

This module is part of the arista.eos collection (version 5.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ospfv3.

New in arista.eos 1.1.0

Synopsis

  • This module configures and manages the attributes of ospfv3 on Arista EOS platforms.

Parameters

Parameter

Comments

config

dictionary

A list of configurations for ospfv3.

processes

list / elements=dictionary

A list of dictionary specifying the ospfv3 processes.

address_family

list / elements=dictionary

Enable address family and enter its config mode

adjacency

dictionary

Configure adjacency options for OSPF instance.

exchange_start

dictionary

Configure exchange-start options for OSPF instance.

threshold

integer

Number of peers to bring up simultaneously.

afi

string

address family .

Choices:

  • "ipv4"

  • "ipv6"

areas

list / elements=dictionary

Specifies the configuration for OSPF areas

area_id

string

Specifies a 32 bit number expressed in decimal or dotted-decimal notation.

authentication

dictionary

Configure authentication for the area incase of ospfv3.

algorithm

string

Name of algorithm to be used.

Choices:

  • "md5"

  • "sha1"

encrypt_key

boolean

If False, key string is not encrypted

Choices:

  • false

  • true

hidden_key

boolean

If True, Specifies that a HIDDEN key will follow.

Choices:

  • false

  • true

key

string

128 bit MD5 key or 140 bit SHA1 key.

passphrase

string

Passphrase String for deriving keys for authentication and encryption.

spi

integer

Specify the SPI value

default_cost

integer

Specify the cost for default summary route in stub/NSSA area.

encryption

dictionary

Configure encryption for the area

algorithm

string

name of the algorithm to be used.

Choices:

  • "sha1"

  • "md5"

encrypt_key

boolean

If False, key string is not encrypted

Choices:

  • false

  • true

encryption

string

name of encryption to be used.

Choices:

  • "3des-cbc"

  • "aes-128-cbc"

  • "aes-192-cbc"

  • "aes-256-cbc"

  • "null"

hidden_key

boolean

If True, Specifies that a HIDDEN key will follow.

Choices:

  • false

  • true

key

string

128 bit MD5 key or 140 bit SHA1 key.

passphrase

string

Passphrase String for deriving keys for authentication and encryption.

spi

integer

Specify the SPI value

nssa

dictionary

Configures NSSA parameters.

default_information_originate

dictionary

Originate default Type 7 LSA.

metric

integer

Metric for default route.

metric_type

integer

Metric type for default route.

nssa_only

boolean

Limit default advertisement to this NSSA area.

Choices:

  • false

  • true

set

boolean

True if only default information orignate is set

Choices:

  • false

  • true

no_summary

boolean

Filter all type-3 LSAs in the nssa area.

Choices:

  • false

  • true

nssa_only

boolean

Disable Type-7 LSA p-bit setting

Choices:

  • false

  • true

set

boolean

True if only nssa is set

Choices:

  • false

  • true

translate

boolean

Enable LSA translation.

Choices:

  • false

  • true

ranges

list / elements=dictionary

Configure route summarization.

address

string

IP address.

advertise

boolean

Enable Advertisement of the range.

Choices:

  • false

  • true

cost

integer

Configures the metric.

subnet_address

string

IP address with mask length

subnet_mask

string

IP subnet mask

stub

dictionary

Stub area.

set

boolean

True if only stub is set

Choices:

  • false

  • true

summary_lsa

boolean

If False , Filter all type-3 LSAs in the stub area.

Choices:

  • false

  • true

auto_cost

dictionary

Set auto-cost.

reference_bandwidth

integer

reference bandwidth in megabits per sec.

bfd

dictionary

Enable BFD.

all_interfaces

boolean

Enable BFD on all interfaces.

Choices:

  • false

  • true

default_information

dictionary

Control distribution of default information.

always

boolean

Always advertise default route.

Choices:

  • false

  • true

metric

integer

Metric for default route.

metric_type

integer

Metric type for default route.

originate

boolean

Distribute a default route.

Choices:

  • false

  • true

route_map

string

Specify which route-map to use.

default_metric

integer

Configure the default metric for redistributed routes.

distance

integer

Specifies the administrative distance for routes.

fips_restrictions

boolean

Use FIPS compliant algorithms

Choices:

  • false

  • true

graceful_restart

dictionary

Enable graceful restart mode.

grace_period

integer

Specify maximum time to wait for graceful-restart to complete.

set

boolean

When true sets the grace_fulrestart config alone.

Choices:

  • false

  • true

graceful_restart_helper

boolean

If True, Enable graceful restart helper.

Choices:

  • false

  • true

log_adjacency_changes

dictionary

To configure link-state changes and transitions of OSPFv3 neighbors.

detail

boolean

If true , configures the switch to log all link-state changes.

Choices:

  • false

  • true

set

boolean

When true sets the log_adjacency_changes config alone.

Choices:

  • false

  • true

max_metric

dictionary

Set maximum metric.

router_lsa

dictionary

Maximum metric in self-originated router-LSAs.

external_lsa

dictionary

Override external-lsa metric with max-metric value.

max_metric_value

integer

Set max metric value for external LSAs.

set

boolean

Set external-lsa attribute.

Choices:

  • false

  • true

include_stub

boolean

Set maximum metric for stub links in router-LSAs.

Choices:

  • false

  • true

on_startup

dictionary

Set maximum metric temporarily after reboot.

wait_for_bgp

boolean

Let BGP decide when to originate router-LSA with normal metric

Choices:

  • false

  • true

wait_period

integer

Wait period in seconds after startup.

set

boolean

Set router-lsa attribute.

Choices:

  • false

  • true

summary_lsa

dictionary

Override summary-lsa metric with max-metric value.

max_metric_value

integer

Set max metric value for external LSAs.

set

boolean

Set external-lsa attribute.

Choices:

  • false

  • true

maximum_paths

integer

Maximum number of next-hops in an ECMP route.

passive_interface

boolean

Include interface but without actively running OSPF.

Choices:

  • false

  • true

redistribute

list / elements=dictionary

Specifies the routes to be redistributed.

route_map

string

Specify which route map to use.

routes

string

Route types (BGP,static,connected)

Choices:

  • "bgp"

  • "connected"

  • "static"

router_id

string

32-bit number assigned to a router running OSPFv3.

shutdown

boolean

Disable the OSPF instance.

Choices:

  • false

  • true

timers

dictionary

Configure OSPF timers.

lsa

any

Configure OSPFv3 LSA timers.

direction

string

Configure OSPFv3 LSA receiving/transmission timers.

Choices:

  • "rx"

  • "tx"

initial

integer

Initial SPF schedule delay in msecs.

max

integer

Max wait time between two SPFs in msecs.

min

integer

Min Hold time between two SPFs in msecs

out_delay

integer

Configure out-delay timer.

pacing

integer

Configure OSPF packet pacing.

spf

dictionary

Configure OSPFv3 spf timers.

initial

integer

Initial SPF schedule delay in msecs.

max

integer

Max wait time between two SPFs in msecs.

min

integer

Min Hold time between two SPFs in msecs

throttle

dictionary

This command is deprecated by ‘timers lsa’ or ‘timers spf’.

initial

integer

Initial SPF schedule delay in msecs.

lsa

boolean

Configure threshold for retransmission of lsa

Choices:

  • false

  • true

max

integer

Max wait time between two SPFs in msecs.

min

integer

Min Hold time between two SPFs in msecs

spf

boolean

Configure time between SPF calculations

Choices:

  • false

  • true

adjacency

dictionary

Configure adjacency options for OSPF instance.

exchange_start

dictionary

Configure exchange-start options for OSPF instance.

threshold

integer

Number of peers to bring up simultaneously.

areas

list / elements=dictionary

Specifies the configuration for OSPF areas

area_id

string

Specifies a 32 bit number expressed in decimal or dotted-decimal notation.

authentication

dictionary

Configure authentication for the area incase of ospfv3.

algorithm

string

Name of algorithm to be used.

Choices:

  • "md5"

  • "sha1"

encrypt_key

boolean

If False, key string is not encrypted

Choices:

  • false

  • true

hidden_key

boolean

If True, Specifies that a HIDDEN key will follow.

Choices:

  • false

  • true

key

string

128 bit MD5 key or 140 bit SHA1 key.

passphrase

string

Passphrase String for deriving keys for authentication and encryption.

spi

integer

Specify the SPI value

default_cost

integer

Specify the cost for default summary route in stub/NSSA area.

encryption

dictionary

Configure encryption for the area

algorithm

string

name of the algorithm to be used.

Choices:

  • "sha1"

  • "md5"

encrypt_key

boolean

If False, key string is not encrypted

Choices:

  • false

  • true

encryption

string

name of encryption to be used.

Choices:

  • "3des-cbc"

  • "aes-128-cbc"

  • "aes-192-cbc"

  • "aes-256-cbc"

  • "null"

hidden_key

boolean

If True, Specifies that a HIDDEN key will follow.

Choices:

  • false

  • true

key

string

128 bit MD5 key or 140 bit SHA1 key.

passphrase

string

Passphrase String for deriving keys for authentication and encryption.

spi

integer

Specify the SPI value

nssa

dictionary

Configures NSSA parameters.

default_information_originate

dictionary

Originate default Type 7 LSA.

metric

integer

Metric for default route.

metric_type

integer

Metric type for default route.

nssa_only

boolean

Limit default advertisement to this NSSA area.

Choices:

  • false

  • true

set

boolean

True if only default information orignate is set

Choices:

  • false

  • true

no_summary

boolean

Filter all type-3 LSAs in the nssa area.

Choices:

  • false

  • true

nssa_only

boolean

Disable Type-7 LSA p-bit setting

Choices:

  • false

  • true

set

boolean

True if only nssa is set

Choices:

  • false

  • true

translate

boolean

Enable LSA translation.

Choices:

  • false

  • true

stub

dictionary

Stub area.

set

boolean

True if only stub is set.

Choices:

  • false

  • true

summary_lsa

boolean

If False , Filter all type-3 LSAs in the stub area.

Choices:

  • false

  • true

auto_cost

dictionary

Set auto-cost.

reference_bandwidth

integer

reference bandwidth in megabits per sec.

bfd

dictionary

Enable BFD.

all_interfaces

boolean

Enable BFD on all interfaces.

Choices:

  • false

  • true

fips_restrictions

boolean

Use FIPS compliant algorithms

Choices:

  • false

  • true

graceful_restart

dictionary

Enable graceful restart mode.

grace_period

integer

Specify maximum time to wait for graceful-restart to complete.

set

boolean

When true sets the grace_fulrestart config alone.

Choices:

  • false

  • true

graceful_restart_helper

boolean

If True, Enable graceful restart helper.

Choices:

  • false

  • true

log_adjacency_changes

dictionary

To configure link-state changes and transitions of OSPFv3 neighbors.

detail

boolean

If true , configures the switch to log all link-state changes.

Choices:

  • false

  • true

set

boolean

When true sets the log_adjacency_changes config alone.

Choices:

  • false

  • true

max_metric

dictionary

Set maximum metric.

router_lsa

dictionary

Maximum metric in self-originated router-LSAs.

external_lsa

dictionary

Override external-lsa metric with max-metric value.

max_metric_value

integer

Set max metric value for external LSAs.

set

boolean

Set external-lsa attribute.

Choices:

  • false

  • true

include_stub

boolean

Set maximum metric for stub links in router-LSAs.

Choices:

  • false

  • true

on_startup

dictionary

Set maximum metric temporarily after reboot.

wait_for_bgp

boolean

Let BGP decide when to originate router-LSA with normal metric

Choices:

  • false

  • true

wait_period

integer

Wait period in seconds after startup.

set

boolean

Set router-lsa attribute.

Choices:

  • false

  • true

summary_lsa

dictionary

Override summary-lsa metric with max-metric value.

max_metric_value

integer

Set max metric value for external LSAs.

set

boolean

Set external-lsa attribute.

Choices:

  • false

  • true

passive_interface

boolean

Include interface but without actively running OSPF.

Choices:

  • false

  • true

router_id

string

32-bit number assigned to a router running OSPFv3.

shutdown

boolean

Disable the OSPF instance.

Choices:

  • false

  • true

timers

dictionary

Configure OSPF timers.

lsa

any

Configure OSPFv3 LSA timers.

direction

string

Configure OSPFv3 LSA receiving/transmission timers.

Choices:

  • "rx"

  • "tx"

initial

integer

Initial SPF schedule delay in msecs.

max

integer

Max wait time between two SPFs in msecs.

min

integer

Min Hold time between two SPFs in msecs

out_delay

integer

Configure out-delay timer.

pacing

integer

Configure OSPF packet pacing.

spf

dictionary

Configure OSPFv3 spf timers.

initial

integer

Initial SPF schedule delay in msecs.

max

integer

Max wait time between two SPFs in msecs.

min

integer

Min Hold time between two SPFs in msecs

throttle

dictionary

This command is deprecated by ‘timers lsa’ or ‘timers spf’.

initial

integer

Initial SPF schedule delay in msecs.

lsa

boolean

Configure threshold for retransmission of lsa

Choices:

  • false

  • true

max

integer

Max wait time between two SPFs in msecs.

min

integer

Min Hold time between two SPFs in msecs

spf

boolean

Configure time between SPF calculations

Choices:

  • false

  • true

vrf

string

VRF name .

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the EOS device by executing the command show running-config | section ospfv3.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • "deleted"

  • "merged" ← (default)

  • "overridden"

  • "replaced"

  • "gathered"

  • "rendered"

  • "parsed"

Notes

Note

  • Tested against Arista EOS 4.24.6F

  • This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state

# veos#show running-config | section ospfv3
# veos#


  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - address_family:
              - timers:
                  lsa: 22
                graceful_restart:
                  grace_period: 35
                afi: "ipv6"
            timers:
              pacing: 55
            fips_restrictions: True
            router_id: "2.2.2.2"
            vrf: "vrfmerge"


# After state

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    router-id 2.2.2.2
# test
#    fips restrictions
#    timers pacing flood 55
#    !
#    address-family ipv6
#       fips restrictions
#       timers lsa arrival 22
#       graceful-restart grace-period 35
# veos#

# Module Execution
#     "after": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv6",
#                         "fips_restrictions": true,
#                         "graceful_restart": {
#                             "grace_period": 35
#                         },
#                         "timers": {
#                             "lsa": 22
#                         }
#                     }
#                 ],
#                 "fips_restrictions": true,
#                 "router_id": "2.2.2.2",
#                 "timers": {
#                     "pacing": 55
#                 },
#                 "vrf": "vrfmerge"
#             }
#         ]
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "router ospfv3 vrf vrfmerge",
#         "address-family ipv6",
#         "graceful-restart grace-period 35",
#         "timers lsa arrival 22",
#         "exit",
#         "timers pacing flood 55",
#         "fips restrictions",
#         "router-id 2.2.2.2",
#         "exit"
#     ],


# using replaced

# before state

# veos#show running-config | section ospfv3
# router ospfv3
#    fips restrictions
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    router-id 2.2.2.2
#    fips restrictions
#    timers pacing flood 55
#    !
#    address-family ipv6
#       fips restrictions
#       timers lsa arrival 22
#       graceful-restart grace-period 35
# veos#


  - arista.eos.eos_ospfv3:
      config:
        processes:
          - areas:
              - area_id: "0.0.0.0"
                encryption:
                  spi: 43
                  encryption: "null"
                  algorithm: "md5"
                  encrypt_key: False
                  passphrase: "7hl8FV3lZ6H1mAKpjL47hQ=="
            vrf: "default"
            address_family:
              - afi: "ipv4"
                router_id: "7.1.1.1"
      state: replaced

# After state
# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#

# Module execution

# "after": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "before": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "fips_restrictions": true,
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "fips_restrictions": true,
#                     "graceful_restart": {
#                         "grace_period": 35
#                     },
#                     "timers": {
#                         "lsa": 22
#                     }
#                 }
#             ],
#             "fips_restrictions": true,
#             "router_id": "2.2.2.2",
#             "timers": {
#                 "pacing": 55
#             },
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "changed": true,
# "commands": [
#     "router ospfv3 vrf vrfmerge",
#     "address-family ipv6",
#     "no fips restrictions",
#     "no graceful-restart",
#     "no timers lsa arrival 22",
#     "area 0.0.0.3 range 10.1.2.2/24 advertise",
#     "area 0.0.0.3 range 60.1.1.1 255.255.0.0 cost 30",
#     "exit",
#     "passive-interface default",
#     "no router-id",
#     "no fips restrictions",
#     "no timers pacing flood 55",
#     "exit"
# ],


# using overridden

# before state

# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - address_family:
              - areas:
                  - area_id: "0.0.0.3"
                    ranges:
                      - address: 10.1.2.2/24
                        advertise: True
                      - address: 60.1.1.1
                        subnet_mask: 255.255.0.0
                        cost: 30
                afi: "ipv6"
            passive_interface: True
            vrf: "vrfmerge"
      state: overridden

# After state

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#



# Module execution

# "after": {
#     "processes": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "before": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "changed": true,
# "commands": [
#     "no router ospfv3",
#     "router ospfv3 vrf vrfmerge",
#     "address-family ipv6",
#     "no area 0.0.0.3 range 10.1.2.0/24",
#     "no area 0.0.0.3 range 60.1.0.0/16 cost 30",
#     "area 0.0.0.3 range 10.1.2.2/24 advertise",
#     "area 0.0.0.3 range 60.1.1.1 255.255.0.0 cost 30",
#     "exit",
#     "exit"
# ],

# using deleted

# Before state

# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - vrf: "default"
      state: deleted

# After state

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


# Module execution
# "after": {
#     "processes": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ],
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         },
#                         {
#                             "route_map": "MAP01",
#                             "routes": "static"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "before": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ],
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         },
#                         {
#                             "route_map": "MAP01",
#                             "routes": "static"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "changed": true,
# "commands": [
#     "no router ospfv3"
# ],

# using parsed

# parsed_ospfv3.cfg

# router ospfv3
#    fips restrictions
#    area 0.0.0.20 stub
#    area 0.0.0.20 authentication ipsec spi 33 sha1 passphrase 7 4O8T3zo4xBdRWXBnsnK934o9SEb+jEhHUN6+xzZgCo2j9EnQBUvtwNxxLEmYmm6w
#    area 0.0.0.40 default-cost 45
#    area 0.0.0.40 stub
#    timers pacing flood 7
#    adjacency exchange-start threshold 11
#    !
#    address-family ipv4
#       fips restrictions
#       redistribute connected
#    !
#    address-family ipv6
#       router-id 10.1.1.1
#       fips restrictions
# !
# router ospfv3 vrf vrf01
#    bfd all-interfaces
#    fips restrictions
#    area 0.0.0.0 encryption ipsec spi 256 esp null sha1 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==
#    log-adjacency-changes detail
#    !
#    address-family ipv4
#       passive-interface default
#       fips restrictions
#       redistribute connected route-map MAP01
#       maximum-paths 100
#    !
#    address-family ipv6
#       fips restrictions
#       area 0.0.0.10 nssa no-summary
#       default-information originate route-map DefaultRouteFilter
#       max-metric router-lsa external-lsa 25 summary-lsa
# !
# router ospfv3 vrf vrf02
#    fips restrictions
#    !
#    address-family ipv6
#       router-id 10.17.0.3
#       distance ospf intra-area 200
#       fips restrictions
#       area 0.0.0.1 stub
#       timers spf delay initial 56 56 56
#       timers out-delay 10


  -  arista.eos.eos_ospfv3:
      running_config: "{{ lookup('file', './parsed_ospfv3.cfg') }}"
      state: parsed

# Module execution

# "parsed": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv4",
#                         "fips_restrictions": true,
#                         "redistribute": [
#                             {
#                                 "routes": "connected"
#                             }
#                         ]
#                     },
#                     {
#                         "afi": "ipv6",
#                         "fips_restrictions": true,
#                         "router_id": "10.1.1.1"
#                     }
#                 ],
#                 "adjacency": {
#                     "exchange_start": {
#                         "threshold": 11
#                     }
#                 },
#                 "areas": [
#                     {
#                         "area_id": "0.0.0.20",
#                         "authentication": {
#                             "algorithm": "sha1",
#                             "hidden_key": true,
#                             "passphrase": "4O8T3zo4xBdRWXBnsnK934o9SEb+jEhHUN6+xzZgCo2j9EnQBUvtwNxxLEmYmm6w",
#                             "spi": 33
#                         },
#                         "stub": {
#                             "set": true
#                         }
#                     },
#                     {
#                         "area_id": "0.0.0.40",
#                         "default_cost": 45,
#                         "stub": {
#                             "set": true
#                         }
#                     }
#                 ],
#                 "fips_restrictions": true,
#                 "timers": {
#                     "pacing": 7
#                 },
#                 "vrf": "default"
#             },
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv4",
#                         "fips_restrictions": true,
#                         "maximum_paths": 100,
#                         "passive_interface": true,
#                         "redistribute": [
#                             {
#                                 "route_map": "MAP01",
#                                 "routes": "connected"
#                             }
#                         ]
#                     },
#                     {
#                         "afi": "ipv6",
#                         "areas": [
#                             {
#                                 "area_id": "0.0.0.10",
#                                 "nssa": {
#                                     "no_summary": true
#                                 }
#                             }
#                         ],
#                         "default_information": {
#                             "originate": true,
#                             "route_map": "DefaultRouteFilter"
#                         },
#                         "fips_restrictions": true,
#                         "max_metric": {
#                             "router_lsa": {
#                                 "external_lsa": {
#                                     "max_metric_value": 25
#                                 },
#                                 "summary_lsa": {
#                                     "set": true
#                                 }
#                             }
#                         }
#                     }
#                 ],
#                 "areas": [
#                     {
#                         "area_id": "0.0.0.0",
#                         "encryption": {
#                             "algorithm": "sha1",
#                             "encryption": "null",
#                             "hidden_key": true,
#                             "passphrase": "7hl8FV3lZ6H1mAKpjL47hQ=="
#                         }
#                     }
#                 ],
#                 "bfd": {
#                     "all_interfaces": true
#                 },
#                 "fips_restrictions": true,
#                 "log_adjacency_changes": {
#                     "detail": true
#                 },
#                 "vrf": "vrf01"
#             },
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv6",
#                         "areas": [
#                             {
#                                 "area_id": "0.0.0.1",
#                                 "stub": {
#                                     "set": true
#                                 }
#                             }
#                         ],
#                         "distance": 200,
#                         "fips_restrictions": true,
#                         "router_id": "10.17.0.3",
#                         "timers": {
#                             "out_delay": 10,
#                             "spf": {
#                                 "initial": 56,
#                                 "max": 56,
#                                 "min": 56,
#                             }
#                         }
#                     }
#                 ],
#                 "fips_restrictions": true,
#                 "vrf": "vrf02"
#             }
#         ]

# using gathered

# native config

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


  -  arista.eos.eos_ospfv3:
      state: gathered

# module execution

# "gathered": {
#     "processes": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ],
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         },
#                         {
#                             "route_map": "MAP01",
#                             "routes": "static"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]

# using rendered

  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - address_family:
              - timers:
                  lsa: 22
                graceful_restart:
                  grace_period: 35
                afi: "ipv6"
            timers:
              pacing: 55
            fips_restrictions: True
            router_id: "2.2.2.2"
            vrf: "vrfmerge"
      state: rendered

# module execution

# "rendered": [
#         "router ospfv3 vrf vrfmerge",
#         "address-family ipv6",
#         "graceful-restart grace-period 35",
#         "timers lsa arrival 22",
#         "exit",
#         "timers pacing flood 55",
#         "fips restrictions",
#         "router-id 2.2.2.2",
#         "exit"
#     ]

Authors

  • Gomathi Selvi Srinivasan (@GomathiselviS)