You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.ios.ios_acls module – Resource module to configure ACLs.

Note

This module is part of the cisco.ios collection (version 3.3.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_acls.

New in cisco.ios 1.0.0

Synopsis 

This module configures and manages the named or numbered ACLs on IOS platforms.

Note

This module has a corresponding action plugin.

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of ACL options.
acls list / elements=dictionary	A list of Access Control Lists (ACL).
aces list / elements=dictionary	The entries within the ACL.
destination dictionary	Specify the packet destination.
address string	Host address to match, or any single host address.
any boolean	Match any source address. Choices: `false` `true`
host string	A single destination host
object_group string	Destination network object group
port_protocol dictionary	Specify the destination port along with protocol. Note, Valid with TCP/UDP protocol_options
eq string	Match only packets on a given port number.
gt string	Match only packets with a greater port number.
lt string	Match only packets with a lower port number.
neq string	Match only packets not on a given port number.
range dictionary	Port group.
end integer	Specify the end of the port range.
start integer	Specify the start of the port range.
wildcard_bits string	Destination wildcard bits, valid with IPV4 address.
dscp string	Match packets with given dscp value.
enable_fragments boolean	Enable non-initial fragments. Choices: `false` `true`
evaluate string	Evaluate an access list
fragments string	Check non-initial fragments. This option is DEPRECATED and is replaced with enable_fragments which accepts bool as input this attribute will be removed after 2024-01-01.
grant string	Specify the action. Choices: `"permit"` `"deny"`
log dictionary	Log matches against this entry.
set boolean	Enable Log matches against this entry Choices: `false` `true`
user_cookie string	User defined cookie (max of 64 char)
log_input dictionary	Log matches against this entry, including input interface.
set boolean	Enable Log matches against this entry, including input interface. Choices: `false` `true`
user_cookie string	User defined cookie (max of 64 char)
option dictionary	Match packets with given IP Options value. Valid only for named acls.
add_ext boolean	Match packets with Address Extension Option (147). Choices: `false` `true`
any_options boolean	Match packets with ANY Option. Choices: `false` `true`
com_security boolean	Match packets with Commercial Security Option (134). Choices: `false` `true`
dps boolean	Match packets with Dynamic Packet State Option (151). Choices: `false` `true`
encode boolean	Match packets with Encode Option (15). Choices: `false` `true`
eool boolean	Match packets with End of Options (0). Choices: `false` `true`
ext_ip boolean	Match packets with Extended IP Option (145). Choices: `false` `true`
ext_security boolean	Match packets with Extended Security Option (133). Choices: `false` `true`
finn boolean	Match packets with Experimental Flow Control Option (205). Choices: `false` `true`
imitd boolean	Match packets with IMI Traffic Desriptor Option (144). Choices: `false` `true`
lsr boolean	Match packets with Loose Source Route Option (131). Choices: `false` `true`
mtup boolean	Match packets with MTU Probe Option (11). Choices: `false` `true`
mtur boolean	Match packets with MTU Reply Option (12). Choices: `false` `true`
no_op boolean	Match packets with No Operation Option (1). Choices: `false` `true`
nsapa boolean	Match packets with NSAP Addresses Option (150). Choices: `false` `true`
record_route boolean	Match packets with Record Route Option (7). Choices: `false` `true`
router_alert boolean	Match packets with Router Alert Option (148). Choices: `false` `true`
sdb boolean	Match packets with Selective Directed Broadcast Option (149). Choices: `false` `true`
security boolean	Match packets with Basic Security Option (130). Choices: `false` `true`
ssr boolean	Match packets with Strict Source Routing Option (137). Choices: `false` `true`
stream_id boolean	Match packets with Stream ID Option (136). Choices: `false` `true`
timestamp boolean	Match packets with Time Stamp Option (68). Choices: `false` `true`
traceroute boolean	Match packets with Trace Route Option (82). Choices: `false` `true`
ump boolean	Match packets with Upstream Multicast Packet Option (152). Choices: `false` `true`
visa boolean	Match packets with Experimental Access Control Option (142). Choices: `false` `true`
zsu boolean	Match packets with Experimental Measurement Option (10). Choices: `false` `true`
precedence integer	Match packets with given precedence value.
protocol string	Specify the protocol to match. Refer to vendor documentation for valid values.
protocol_options dictionary	protocol type.
ahp boolean	Authentication Header Protocol. Choices: `false` `true`
eigrp boolean	Cisco’s EIGRP routing protocol. Choices: `false` `true`
esp boolean	Encapsulation Security Payload. Choices: `false` `true`
gre boolean	Cisco’s GRE tunneling. Choices: `false` `true`
hbh boolean	Hop by Hop options header. Valid for IPV6 Choices: `false` `true`
icmp dictionary	Internet Control Message Protocol.
administratively_prohibited boolean	Administratively prohibited Choices: `false` `true`
alternate_address boolean	Alternate address Choices: `false` `true`
conversion_error boolean	Datagram conversion Choices: `false` `true`
dod_host_prohibited boolean	Host prohibited Choices: `false` `true`
dod_net_prohibited boolean	Net prohibited Choices: `false` `true`
echo boolean	Echo (ping) Choices: `false` `true`
echo_reply boolean	Echo reply Choices: `false` `true`
general_parameter_problem boolean	Parameter problem Choices: `false` `true`
host_isolated boolean	Host isolated Choices: `false` `true`
host_precedence_unreachable boolean	Host unreachable for precedence Choices: `false` `true`
host_redirect boolean	Host redirect Choices: `false` `true`
host_tos_redirect boolean	Host redirect for TOS Choices: `false` `true`
host_tos_unreachable boolean	Host unreachable for TOS Choices: `false` `true`
host_unknown boolean	Host unknown Choices: `false` `true`
host_unreachable boolean	Host unreachable Choices: `false` `true`
information_reply boolean	Information replies Choices: `false` `true`
information_request boolean	Information requests Choices: `false` `true`
mask_reply boolean	Mask replies Choices: `false` `true`
mask_request boolean	mask_request Choices: `false` `true`
mobile_redirect boolean	Mobile host redirect Choices: `false` `true`
net_redirect boolean	Network redirect Choices: `false` `true`
net_tos_redirect boolean	Net redirect for TOS Choices: `false` `true`
net_tos_unreachable boolean	Network unreachable for TOS Choices: `false` `true`
net_unreachable boolean	Net unreachable Choices: `false` `true`
network_unknown boolean	Network unknown Choices: `false` `true`
no_room_for_option boolean	Parameter required but no room Choices: `false` `true`
option_missing boolean	Parameter required but not present Choices: `false` `true`
packet_too_big boolean	Fragmentation needed and DF set Choices: `false` `true`
parameter_problem boolean	All parameter problems Choices: `false` `true`
port_unreachable boolean	Port unreachable Choices: `false` `true`
precedence_unreachable boolean	Precedence cutoff Choices: `false` `true`
protocol_unreachable boolean	Protocol unreachable Choices: `false` `true`
reassembly_timeout boolean	Reassembly timeout Choices: `false` `true`
redirect boolean	All redirects Choices: `false` `true`
router_advertisement boolean	Router discovery advertisements Choices: `false` `true`
router_solicitation boolean	Router discovery solicitations Choices: `false` `true`
source_quench boolean	Source quenches Choices: `false` `true`
source_route_failed boolean	Source route failed Choices: `false` `true`
time_exceeded boolean	All time exceededs Choices: `false` `true`
timestamp_reply boolean	Timestamp replies Choices: `false` `true`
timestamp_request boolean	Timestamp requests Choices: `false` `true`
traceroute boolean	Traceroute Choices: `false` `true`
ttl_exceeded boolean	TTL exceeded Choices: `false` `true`
unreachable boolean	All unreachables Choices: `false` `true`
igmp dictionary	Internet Gateway Message Protocol.
dvmrp boolean	Distance Vector Multicast Routing Protocol(2) Choices: `false` `true`
host_query boolean	IGMP Membership Query(0) Choices: `false` `true`
mtrace_resp boolean	Multicast Traceroute Response(7) Choices: `false` `true`
mtrace_route boolean	Multicast Traceroute(8) Choices: `false` `true`
pim boolean	Protocol Independent Multicast(3) Choices: `false` `true`
trace boolean	Multicast trace(4) Choices: `false` `true`
v1host_report boolean	IGMPv1 Membership Report(1) Choices: `false` `true`
v2host_report boolean	IGMPv2 Membership Report(5) Choices: `false` `true`
v2leave_group boolean	IGMPv2 Leave Group(6) Choices: `false` `true`
v3host_report boolean	IGMPv3 Membership Report(9) Choices: `false` `true`
ip boolean	Any Internet Protocol. Choices: `false` `true`
ipinip boolean	IP in IP tunneling. Choices: `false` `true`
ipv6 boolean	Any IPv6. Choices: `false` `true`
nos boolean	KA9Q NOS compatible IP over IP tunneling. Choices: `false` `true`
ospf boolean	OSPF routing protocol. Choices: `false` `true`
pcp boolean	Payload Compression Protocol. Choices: `false` `true`
pim boolean	Protocol Independent Multicast. Choices: `false` `true`
protocol_number integer	An IP protocol number
sctp boolean	Stream Control Transmission Protocol. Choices: `false` `true`
tcp dictionary	Match TCP packet flags
ack boolean	Match on the ACK bit Choices: `false` `true`
established boolean	Match established connections Choices: `false` `true`
fin boolean	Match on the FIN bit Choices: `false` `true`
psh boolean	Match on the PSH bit Choices: `false` `true`
rst boolean	Match on the RST bit Choices: `false` `true`
syn boolean	Match on the SYN bit Choices: `false` `true`
urg boolean	Match on the URG bit Choices: `false` `true`
udp boolean	User Datagram Protocol. Choices: `false` `true`
remarks list / elements=string	The remarks/description of the ACL.
sequence integer	Sequence Number for the Access Control Entry(ACE). Refer to vendor documentation for valid values.
source dictionary	Specify the packet source.
address string	Source network address.
any boolean	Match any source address. Choices: `false` `true`
host string	A single source host
object_group string	Source network object group
port_protocol dictionary	Specify the source port along with protocol. Note, Valid with TCP/UDP protocol_options
eq string	Match only packets on a given port number.
gt string	Match only packets with a greater port number.
lt string	Match only packets with a lower port number.
neq string	Match only packets not on a given port number.
range dictionary	Port group.
end integer	Specify the end of the port range.
start integer	Specify the start of the port range.
wildcard_bits string	Source wildcard bits, valid with IPV4 address.
time_range string	Specify a time-range.
tos dictionary	Match packets with given TOS value. Note, DSCP and TOS are mutually exclusive
max_reliability boolean	Match packets with max reliable TOS (2). Choices: `false` `true`
max_throughput boolean	Match packets with max throughput TOS (4). Choices: `false` `true`
min_delay boolean	Match packets with min delay TOS (8). Choices: `false` `true`
min_monetary_cost boolean	Match packets with min monetary cost TOS (1). Choices: `false` `true`
normal boolean	Match packets with normal TOS (0). Choices: `false` `true`
service_value integer	Type of service value
ttl dictionary	Match packets with given TTL value.
eq integer	Match only packets on a given TTL number.
gt integer	Match only packets with a greater TTL number.
lt integer	Match only packets with a lower TTL number.
neq integer	Match only packets not on a given TTL number.
range dictionary	Match only packets in the range of TTLs.
end integer	Specify the end of the port range.
start integer	Specify the start of the port range.
acl_type string	ACL type Note, it’s mandatory and required for Named ACL, but for Numbered ACL it’s not mandatory. Choices: `"extended"` `"standard"`
name string / required	The name or the number of the ACL.
afi string / required	The Address Family Indicator (AFI) for the Access Control Lists (ACL). Choices: `"ipv4"` `"ipv6"`
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh access-list. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The state merged is the default state which merges the want and have config, but for ACL module as the IOS platform doesn’t allow update of ACE over an pre-existing ACE sequence in ACL, same way ACLs resource module will error out for respective scenario and only addition of new ACE over new sequence will be allowed with merge state. The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of commands show access-list and show running-config \| include ip(v6* access-list\|remark) executed on device. Config data from both the commands should be kept together one after another for the parsers to pick the commands correctly. For state parsed active connection to remote host is not required. The state overridden, modify/add the ACLs defined, deleted all other ACLs. The state replaced, modify/add only the ACEs of the ACLs defined only. It does not perform any other change on the device. The state deleted, deletes only the specified ACLs, or all if not specified. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

Tested against Cisco IOSv Version 15.2 on VIRL
Module behavior is not idempotent when sequence for aces are not mentioned
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html

Examples 

# Using merged

# Before state:
# -------------
#
# vios#sh access-lists
# Extended IP access list 100
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10

- name: Merge provided configuration with device configuration
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
      acls:
      - name: 100
        aces:
        - sequence: 10
          protocol_options:
            icmp:
              traceroute: true
    state: merged

# After state:
# ------------
#
# Play Execution fails, with error:
# Cannot update existing sequence 10 of ACLs 100 with state merged.
# Please use state replaced or overridden.

# Before state:
# -------------
#
# vios#sh access-lists
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10

- name: Merge provided configuration with device configuration
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
      acls:
      - name: std_acl
        acl_type: standard
        aces:
        - grant: deny
          source:
            address: 192.168.1.200
        - grant: deny
          source:
            address: 192.168.2.0
            wildcard_bits: 0.0.0.255
      - name: 110
        aces:
        - sequence: 10
          protocol_options:
            icmp:
              traceroute: true
        - grant: deny
          protocol_options:
            tcp:
              ack: true
          source:
            host: 198.51.100.0
          destination:
            host: 198.51.110.0
            port_protocol:
              eq: telnet
      - name: test
        acl_type: extended
        aces:
        - grant: deny
          protocol_options:
            tcp:
              fin: true
          source:
            address: 192.0.2.0
            wildcard_bits: 0.0.0.255
          destination:
            address: 192.0.3.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: www
          option:
            traceroute: true
          ttl:
            eq: 10
      - name: 123
        aces:
        - remarks:
          - "remarks for extended ACL 1"
          - "check ACL"
        - grant: deny
          protocol_options:
            tcp:
              ack: true
          source:
            address: 198.51.100.0
            wildcard_bits: 0.0.0.255
          destination:
            address: 198.51.101.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          tos:
            service_value: 12
        - grant: deny
          protocol_options:
            tcp:
              ack: true
          source:
            address: 192.0.3.0
            wildcard_bits: 0.0.0.255
          destination:
            address: 192.0.4.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: www
          dscp: ef
          ttl:
            lt: 20
    - afi: ipv6
      acls:
      - name: R1_TRAFFIC
        aces:
        - grant: deny
          protocol_options:
            tcp:
              ack: true
          source:
            any: true
            port_protocol:
              eq: www
          destination:
            any: true
            port_protocol:
              eq: telnet
          dscp: af11
    state: merged

# Commands fired:
# ---------------
#
# - ip access-list standard std_acl
# - deny 192.168.1.200
# - deny 192.168.2.0 0.0.0.255
# - ip access-list extended 110
# - 10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
# - deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# - ip access-list extended test
# - deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# - ip access-list extended 123
# - deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
# - deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# - remark remarks for extended ACL 1
# - remark check ACL
# - ipv6 access-list R1_TRAFFIC
# - deny tcp any eq www any eq telnet ack dscp af11

# After state:
# ------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 100
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10


# Using replaced

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10


- name: Replaces device configuration of listed acls with provided configuration
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
      acls:
      - name: 110
        aces:
        - grant: deny
          protocol_options:
            tcp:
              syn: true
          source:
            address: 192.0.2.0
            wildcard_bits: 0.0.0.255
          destination:
            address: 192.0.3.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: www
          dscp: ef
          ttl:
            eq: 10
      - name: 150
        aces:
        - grant: deny
          sequence: 20
          protocol_options:
            tcp:
              syn: true
          source:
            address: 198.51.100.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          destination:
            address: 198.51.110.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          dscp: ef
          ttl:
            eq: 10
    state: replaced

# Commands fired:
# ---------------
#
# - no ip access-list extended 110
# - ip access-list extended 110
# - deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www syn dscp ef ttl eq 10
# - ip access-list extended 150
# - 20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10

# After state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www syn dscp ef ttl eq 10
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list 150
#    20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

# Using overridden

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: Override device configuration of all acls with provided configuration
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
      acls:
      - name: 110
        aces:
        - grant: deny
          sequence: 20
          protocol_options:
            tcp:
              ack: true
          source:
            address: 198.51.100.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          destination:
            address: 198.51.110.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: www
          dscp: ef
          ttl:
            eq: 10
      - name: 150
        aces:
        - grant: deny
          sequence: 10
          protocol_options:
            tcp:
              syn: true
          source:
            address: 198.51.100.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          destination:
            address: 198.51.110.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          dscp: ef
          ttl:
            eq: 10
    state: overridden

# Commands fired:
# ---------------
#
# - no ip access-list standard std_acl
# - no ip access-list extended 110
# - no ip access-list extended 123
# - no ip access-list extended 150
# - no ip access-list extended test
# - no ipv6 access-list R1_TRAFFIC
# - ip access-list extended 150
# - 10 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10
# - ip access-list extended 110
# - 20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq www ack dscp ef ttl eq 10

# After state:
# -------------
#
# vios#sh access-lists
# Extended IP access list 110
#    20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq www ack dscp ef ttl eq 10
# Extended IP access list 150
#    10 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10

# Using Deleted

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: "Delete ACLs (Note: This won't delete the all configured ACLs)"
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
      acls:
      - name: test
        acl_type: extended
      - name: 110
    - afi: ipv6
      acls:
      - name: R1_TRAFFIC
    state: deleted

# Commands fired:
# ---------------
#
# - no ip access-list extended test
# - no ip access-list extended 110
# - no ipv6 access-list R1_TRAFFIC

# After state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: "Delete ACLs based on AFI (Note: This won't delete the all configured ACLs)"
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
    state: deleted

# Commands fired:
# ---------------
#
# - no ip access-list standard std_acl
# - no ip access-list extended test
# - no ip access-list extended 110
# - no ip access-list extended 123

# After state:
# -------------
#
# vios#sh access-lists
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

# Using Deleted without any config passed
#"(NOTE: This will delete all of configured ACLs)"

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: 'Delete ALL of configured ACLs (Note: This WILL delete the all configured
    ACLs)'
  cisco.ios.ios_acls:
    state: deleted

# Commands fired:
# ---------------
#
# - no ip access-list extended test
# - no ip access-list extended 110
# - no ip access-list extended 123
# - no ip access-list extended test
# - no ipv6 access-list R1_TRAFFIC

# After state:
# -------------
#
# vios#sh access-lists

# Using Gathered

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: Gather listed acls with provided configurations
  cisco.ios.ios_acls:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "address": "192.0.3.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "dscp": "ef",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "icmp": {
#                                     "echo": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "address": "192.0.2.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "ttl": {
#                                 "eq": 10
#                             }
#                         }
#                     ],
#                     "acl_type": "extended",
#                     "name": "110"
#                 },
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "address": "198.51.101.0",
#                                 "port_protocol": {
#                                     "eq": "telnet"
#                                 },
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "address": "198.51.100.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "tos": {
#                                 "service_value": 12
#                             }
#                         },
#                         {
#                             "destination": {
#                                 "address": "192.0.4.0",
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 },
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "dscp": "ef",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "sequence": 20,
#                             "source": {
#                                 "address": "192.0.3.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "ttl": {
#                                 "lt": 20
#                             }
#                         }
#                     ],
#                     "acl_type": "extended",
#                     "name": "123"
#                 },
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "address": "192.0.3.0",
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 },
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "grant": "deny",
#                             "option": {
#                                 "traceroute": true
#                             },
#                             "protocol_options": {
#                                 "tcp": {
#                                     "fin": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "address": "192.0.2.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "ttl": {
#                                 "eq": 10
#                             }
#                         }
#                     ],
#                     "acl_type": "extended",
#                     "name": "test_acl"
#                 }
#             ],
#             "afi": "ipv4"
#         },
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "telnet"
#                                 }
#                             },
#                             "dscp": "af11",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 }
#                             }
#                         }
#                     ],
#                     "name": "R1_TRAFFIC"
#                 }
#             ],
#             "afi": "ipv6"
#         }
#     ]

# Using Rendered

- name: Rendered the provided configuration with the existing running configuration
  cisco.ios.ios_acls:
    config:
    - afi: ipv4
      acls:
      - name: 110
        aces:
        - grant: deny
          sequence: 10
          protocol_options:
            tcp:
              syn: true
          source:
            address: 192.0.2.0
            wildcard_bits: 0.0.0.255
          destination:
            address: 192.0.3.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: www
          dscp: ef
          ttl:
            eq: 10
      - name: 150
        aces:
        - grant: deny
          protocol_options:
            tcp:
              syn: true
          source:
            address: 198.51.100.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          destination:
            address: 198.51.110.0
            wildcard_bits: 0.0.0.255
            port_protocol:
              eq: telnet
          dscp: ef
          ttl:
            eq: 10
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "ip access-list extended 110",
#         "10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www syn dscp ef ttl eq 10",
#         "ip access-list extended 150",
#         "deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# IPv6 access-list R1_TRAFFIC
# deny tcp any eq www any eq telnet ack dscp af11

- name: Parse the commands for provided configuration
  cisco.ios.ios_acls:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "telnet"
#                                 }
#                             },
#                             "dscp": "af11",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "source": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 }
#                             }
#                         }
#                     ],
#                     "name": "R1_TRAFFIC"
#                 }
#             ],
#             "afi": "ipv6"
#         }
#     ]

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: `"This output will always be in the same format as the module argspec.\n"`
before dictionary	The configuration prior to the module execution. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `"This output will always be in the same format as the module argspec.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `["ip access-list extended 110", "deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10", "permit ip host 2.2.2.2 host 3.3.3.3"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["ip access-list extended test", "permit ip host 2.2.2.2 host 3.3.3.3", "permit tcp host 1.1.1.1 host 5.5.5.5 eq www"]`

Authors

Sumit Jaiswal (@justjais)
Sagar Paul (@KB-perByte)

Collection links

Issue Tracker Repository (Sources)

cisco.ios.ios_acls module – Resource module to configure ACLs.

Synopsis

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 

Return Values 