cisco.ios.ios_ospfv2 module – Resource module to configure OSPFv2.

Note

This module is part of the cisco.ios collection (version 3.3.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ospfv2.

New in cisco.ios 1.0.0

Synopsis

  • This module configures and manages the Open Shortest Path First (OSPF) version 2 on IOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

dictionary

A dictionary of OSPF options.

processes

list / elements=dictionary

List of OSPF instance configurations.

address_family

dictionary

Router Address Family configuration mode

default

boolean

Set a command to its defaults

Choices:

  • false

  • true

snmp_context

string

Modify snmp parameters

Configure SNMP context name

topology

dictionary

Associate the routing protocol to a topology instance

base

boolean

Entering router topology sub mode

Choices:

  • false

  • true

name

string

Routing topology instance name

tid

boolean

Configuring the routing protocol topology tid

Note, please refer vendor documentation for valid values

Choices:

  • false

  • true

adjacency

dictionary

To configure control adjacency formation

max_adjacency

integer

Maximum number of adjacencies allowed to be forming

Please refer vendor documentation for valid values

min_adjacency

integer

Initial number of adjacencies allowed to be forming in an area

Please refer vendor documentation for valid values

none

boolean

No initial

Choices:

  • false

  • true

areas

list / elements=dictionary

OSPF area parameters

area_id

string

OSPF area ID as a decimal value. Please refer vendor documentation of Valid values.

OSPF area ID in IP address format(e.g. A.B.C.D)

authentication

dictionary

Area authentication

enable

boolean

Enable area authentication

Choices:

  • false

  • true

message_digest

boolean

Use IPsec authentication

Choices:

  • false

  • true

capability

boolean

Enable area specific capability

Enable exclusion of links from base topology

Choices:

  • false

  • true

default_cost

integer

Set the summary default-cost of a NSSA/stub area

Stub’s advertised external route metric

Note, please refer vendor documentation for respective valid values

filter_list

list / elements=dictionary

Filter networks between OSPF areas

direction

string / required

The direction to apply on the filter networks sent to and from this area.

Choices:

  • "in"

  • "out"

name

string

Name of an IP prefix-list

nssa

dictionary

Specify a NSSA area

default_information_originate

dictionary

Originate Type 7 default into NSSA area

metric

integer

OSPF default metric

metric_type

integer

OSPF metric type for default routes

OSPF Link State type

Choices:

  • 1

  • 2

nssa_only

boolean

Limit default advertisement to this NSSA area

Choices:

  • false

  • true

no_ext_capability

boolean

Do not send domain specific capabilities into NSSA

Choices:

  • false

  • true

no_redistribution

boolean

No redistribution into this NSSA area

Choices:

  • false

  • true

no_summary

boolean

Do not send summary LSA into NSSA

Choices:

  • false

  • true

set

boolean

Enable a NSSA area

Choices:

  • false

  • true

translate

string

Translate LSA

Always translate LSAs on this ABR

Suppress forwarding address in translated LSAs

Choices:

  • "always"

  • "suppress-fa"

ranges

list / elements=dictionary

Summarize routes matching address/mask (border routers only)

address

string

IP address to match

advertise

boolean

Advertise this range (default)

Since, advertise when enabled is not shown in running-config idempotency won’t be maintained for the play in the second or next run of the play.

Choices:

  • false

  • true

cost

integer

User specified metric for this range

netmask

string

IP mask for address

not_advertise

boolean

DoNotAdvertise this range

Choices:

  • false

  • true

dictionary

Define a sham link and its parameters

integer

Associate a cost with the sham-link

Cost of the sham-link

Note, please refer vendor documentation for respective valid values

string

IP addr associated with sham-link destination (A.B.C.D)

string

IP addr associated with sham-link source (A.B.C.D)

integer

TTL security check

Maximum number of IP hops allowed

stub

dictionary

Specify a stub area

Backbone can not be configured as stub area

no_ext_capability

boolean

Do not send domain specific capabilities into stub area

Choices:

  • false

  • true

no_summary

boolean

Do not send summary LSA into stub area

Choices:

  • false

  • true

set

boolean

Enable a stub area

Choices:

  • false

  • true

auto_cost

dictionary

Calculate OSPF interface cost according to bandwidth

reference_bandwidth

integer

Use reference bandwidth method to assign OSPF cost

Note, refer vendor documentation for respective valid values

set

boolean

Enable OSPF auto-cost

Choices:

  • false

  • true

bfd

boolean

BFD configuration commands

Enable BFD on all interfaces

Choices:

  • false

  • true

capability

dictionary

Enable specific OSPF feature

lls

boolean

Link-local Signaling (LLS) support

Choices:

  • false

  • true

opaque

boolean

Opaque LSA

Choices:

  • false

  • true

transit

boolean

Transit Area

Choices:

  • false

  • true

vrf_lite

boolean

Do not perform PE specific checks

Choices:

  • false

  • true

compatible

dictionary

OSPF router compatibility list

rfc1583

boolean

compatible with RFC 1583

Choices:

  • false

  • true

rfc1587

boolean

compatible with RFC 1587

Choices:

  • false

  • true

rfc5243

boolean

supports DBD exchange optimization

Choices:

  • false

  • true

default_information

dictionary

Control distribution of default information

always

boolean

Always advertise default route

Choices:

  • false

  • true

metric

integer

OSPF default metric

Note, refer vendor documentation for respective valid values

metric_type

integer

OSPF metric type for default routes

Note, please refer vendor documentation for respective valid range

originate

boolean

Distribute a default route

Choices:

  • false

  • true

route_map

string

Route-map reference name

default_metric

integer

Set metric of redistributed routes

discard_route

dictionary

Enable or disable discard-route installation

external

integer

Discard route for redistributed summarised routes

Administrative distance for redistributed summarised routes

Note, please refer vendor documentation for respective valid range

internal

integer

Discard route for summarised internal routes

Administrative distance for summarised internal routes

Note, please refer vendor documentation for respective valid range

set

boolean

Enable discard-route installation

Choices:

  • false

  • true

distance

dictionary

Define an administrative distance

admin_distance

dictionary

OSPF Administrative distance

acl

string

Access-list name/number

address

string

IP Source address

distance

integer

Administrative distance

wildcard_bits

string

Wildcard bits

ospf

dictionary

OSPF distance

external

integer

External type 5 and type 7 routes

inter_area

integer

Inter-area routes

intra_area

integer

Intra-area routes

distribute_list

dictionary

Filter networks in routing updates

acls

list / elements=dictionary

IP access list

direction

string / required

Filter incoming and outgoing routing updates.

Choices:

  • "in"

  • "out"

interface

string

Interface configuration (GigabitEthernet A/B)

Valid with incoming traffic

name

string / required

IP access list name/number

protocol

string

Protocol config (bgp 1).

Valid with outgoing traffic

prefix

dictionary

Filter prefixes in routing updates

direction

string / required

Filter incoming and outgoing routing updates.

Choices:

  • "in"

  • "out"

gateway_name

string

Gateway name for filtering incoming updates based on gateway

interface

string

Interface configuration (GigabitEthernet A/B)

Valid with incoming traffic

name

string / required

Name of an IP prefix-list

protocol

string

Protocol config (bgp 1).

Valid with outgoing traffic

route_map

dictionary

Filter prefixes in routing updates

name

string / required

Route-map name

domain_id

dictionary

OSPF domain-id

ip_address

dictionary

IP address

address

string

OSPF domain ID in IP address format

secondary

boolean

Secondary Domain-ID

Choices:

  • false

  • true

null

boolean

Null Domain-ID

Choices:

  • false

  • true

domain_tag

integer

OSPF domain-tag which is OSPF domain tag - 32-bit value

Note, please refer vendor documentation for respective valid range

event_log

dictionary

Event Logging

enable

boolean

Enable event Logging

Choices:

  • false

  • true

one_shot

boolean

Disable Logging When Log Buffer Becomes Full

Choices:

  • false

  • true

pause

boolean

Pause Event Logging

Choices:

  • false

  • true

size

integer

Maximum Number of Events Stored in the Event Log

Note, refer vendor documentation for respective valid values

help

boolean

Description of the interactive help system

Choices:

  • false

  • true

ignore

boolean

Do not complain about specific event

Do not complain upon receiving LSA of the specified type, MOSPF Type 6 LSA

Choices:

  • false

  • true

interface_id

boolean

Source of the interface ID

SNMP MIB ifIndex

Choices:

  • false

  • true

ispf

boolean

Enable incremental SPF computation

Choices:

  • false

  • true

limit

dictionary

Limit a specific OSPF feature and LS update, DBD, and LS request retransmissions

dc

dictionary

Demand circuit retransmissions

disable

boolean

Disble the feature

Choices:

  • false

  • true

number

integer

The maximum number of retransmissions

non_dc

dictionary

Non-demand-circuit retransmissions

disable

boolean

Disble the feature

Choices:

  • false

  • true

number

integer

The maximum number of retransmissions

local_rib_criteria

dictionary

Enable or disable usage of local RIB as route criteria

enable

boolean

Enable usage of local RIB as route criteria

Choices:

  • false

  • true

forwarding_address

boolean

Local RIB used to validate external/NSSA forwarding addresses

Choices:

  • false

  • true

inter_area_summary

boolean

Local RIB used as criteria for inter-area summaries

Choices:

  • false

  • true

nssa_translation

boolean

Local RIB used as criteria for NSSA translation

Choices:

  • false

  • true

log_adjacency_changes

dictionary

Log changes in adjacency state

detail

boolean

Log all state changes

Choices:

  • false

  • true

set

boolean

Log changes in adjacency state

Choices:

  • false

  • true

max_lsa

dictionary

Maximum number of non self-generated LSAs to accept

ignore_count

integer

Maximum number of times adjacencies can be suppressed

Note, refer vendor documentation for respective valid values

ignore_time

integer

Number of minutes during which all adjacencies are suppressed

Note, refer vendor documentation for respective valid values

number

integer

Maximum number of non self-generated LSAs to accept

Note, refer vendor documentation for respective valid values

reset_time

integer

Number of minutes after which ignore-count is reset to zero

Note, refer vendor documentation for respective valid values

threshold_value

integer

Threshold value (%) at which to generate a warning msg

Note, refer vendor documentation for respective valid values

warning_only

boolean

Only give a warning message when limit is exceeded

Choices:

  • false

  • true

max_metric

dictionary

Set maximum metric

external_lsa

integer

Override external-lsa metric with max-metric value

Overriding metric in external-LSAs

Note, refer vendor documentation for respective valid values

include_stub

boolean

Set maximum metric for stub links in router-LSAs

Choices:

  • false

  • true

on_startup

dictionary

Set maximum metric temporarily after reboot

time

integer

Time, in seconds, router-LSAs are originated with max-metric

Note, please refer vendor documentation for respective valid range

wait_for_bgp

boolean

Let BGP decide when to originate router-LSA with normal metric

Choices:

  • false

  • true

router_lsa

boolean / required

Maximum metric in self-originated router-LSAs

Choices:

  • false

  • true

summary_lsa

integer

Override summary-lsa metric with max-metric value

Note, please refer vendor documentation for respective valid range

maximum_paths

integer

Forward packets over multiple paths

Number of paths

mpls

dictionary

Configure MPLS routing protocol parameters

ldp

dictionary

routing protocol commands for MPLS LDP

autoconfig

dictionary

routing protocol commands for MPLS LDP

area

string

Configure an OSPF area to run MPLS LDP

set

boolean

Configure LDP automatic configuration and set the config

Choices:

  • false

  • true

sync

boolean

Configure LDP-IGP Synchronization

Choices:

  • false

  • true

traffic_eng

dictionary

Let BGP decide when to originate router-LSA with normal metric

area

string

Configure an ospf area to run MPLS Traffic Engineering

OSPF area ID as a decimal value or in IP address format

autoroute_exclude

string

MPLS TE autoroute exclude

Filter prefixes based on name of an IP prefix-list

interface

dictionary

MPLS TE interface configuration for this OSPF process

area

integer

Advertise MPLS TE information for this interface into area

OSPF area ID as a decimal value

interface_type

string

TE Interface configuration (GigabitEthernet A/B)

mesh_group

dictionary

Traffic Engineering Mesh-Group advertisement

area

string

configure flooding scope as area

id

integer

Mesh Group Id

interface

string

Interface configuration (GigabitEthernet A/B)

multicast_intact

boolean

MPLS TE and PIM interaction

Choices:

  • false

  • true

router_id_interface

string

Router Interface configuration (GigabitEthernet A/B)

neighbor

dictionary

Specify a neighbor router

address

string

Neighbor address (A.B.C.D)

cost

integer

OSPF cost for point-to-multipoint neighbor metric

Note, please refer vendor documentation for respective valid range

database_filter

boolean

Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor

Filter all outgoing LSA

Choices:

  • false

  • true

poll_interval

integer

OSPF dead-router polling interval of non-broadcast neighbor in Seconds

priority

integer

OSPF priority of non-broadcast neighbor priority

network

list / elements=dictionary

Enable routing on an IP network

address

string

Network number

area

string

Set the OSPF area ID

wildcard_bits

string

OSPF wild card bits

nsf

dictionary

Non-stop forwarding

cisco

dictionary

Cisco Non-stop forwarding

disable

boolean

disable helper support

Choices:

  • false

  • true

helper

boolean

helper support

Choices:

  • false

  • true

ietf

dictionary

IETF graceful restart

disable

boolean

disable helper support

Choices:

  • false

  • true

helper

boolean

helper support

Choices:

  • false

  • true

strict_lsa_checking

boolean

enable helper strict LSA checking

Choices:

  • false

  • true

passive_interface

string

passive_interface param is deprecated and a newer param passive_interfaces with added functionality’s is introduced, please meke use of the new available passive_interfaces instead.

Suppress routing updates on an interface (GigabitEthernet A/B)

Interface name with respective interface number

passive_interfaces

dictionary

Suppress routing updates on an interface

default

boolean

Suppress routing updates on all interfaces

Choices:

  • false

  • true

interface

dictionary

Suppress/Un-Suppress routing updates on interface

name

list / elements=string

Name of interface (GigabitEthernet A/B)

set_interface

boolean

Suppress/Un-Suppress routing updates

Choices:

  • false

  • true

prefix_suppression

boolean

Enable prefix suppression

Choices:

  • false

  • true

priority

integer

OSPF topology priority

Note, refer vendor documentation for respective valid values

process_id

integer / required

Process ID

queue_depth

dictionary

Hello/Router process queue depth

hello

dictionary

OSPF Hello process queue depth

max_packets

integer

maximum number of packets in the queue

unlimited

boolean

Unlimited queue depth

Choices:

  • false

  • true

update

dictionary

OSPF Router process queue depth

max_packets

integer

maximum number of packets in the queue

unlimited

boolean

Unlimited queue depth

Choices:

  • false

  • true

router_id

string

Router-id address for this OSPF process

OSPF router-id in IP address format (A.B.C.D)

shutdown

boolean

Shutdown the router process

Choices:

  • false

  • true

summary_address

dictionary

Configure IP address summaries

address

string

IP summary address

mask

string

IP Summary mask

not_advertise

boolean

Do not advertise or translate

Choices:

  • false

  • true

nssa_only

boolean

Limit summary to NSSA areas

Choices:

  • false

  • true

tag

integer

Set tag

timers

dictionary

Adjust routing timers

lsa

integer

OSPF LSA timers, arrival timer

The minimum interval in milliseconds between accepting the same LSA

Note, refer vendor documentation for respective valid values

pacing

dictionary

OSPF pacing timers

flood

integer

OSPF flood pacing timer

The minimum interval in msec to pace limit flooding on interface

Note, refer vendor documentation for respective valid values

lsa_group

integer

OSPF LSA group pacing timer

Interval in sec between group of LSA being refreshed or maxaged

Note, refer vendor documentation for respective valid values

retransmission

integer

OSPF retransmission pacing timer

The minimum interval in msec between neighbor retransmissions

Note, refer vendor documentation for respective valid values

throttle

dictionary

OSPF throttle timers

lsa

dictionary

OSPF LSA throttle timers

first_delay

integer

Delay to generate first occurrence of LSA in milliseconds

Note, refer vendor documentation for respective valid values

max_delay

integer

Maximum delay between originating the same LSA in milliseconds

Note, refer vendor documentation for respective valid values

min_delay

integer

Minimum delay between originating the same LSA in milliseconds

Note, refer vendor documentation for respective valid values

spf

dictionary

OSPF SPF throttle timers - Delay between receiving a change to SPF calculation in milliseconds - Note, refer vendor documentation for respective valid values

between_delay

integer

Delay between first and second SPF calculation in milliseconds

Note, refer vendor documentation for respective valid values

max_delay

integer

Maximum wait time in milliseconds for SPF calculations

Note, refer vendor documentation for respective valid values

receive_delay

integer

Delay between receiving a change to SPF calculation in milliseconds

Note, refer vendor documentation for respective valid values

traffic_share

boolean

How to compute traffic share over alternate paths

All traffic shared among min metric paths

Use different interfaces for equal-cost paths

Choices:

  • false

  • true

ttl_security

dictionary

TTL security check

hops

integer

Maximum number of IP hops allowed

Note, refer vendor documentation for respective valid values

set

boolean

Enable TTL Security on all interfaces

Choices:

  • false

  • true

vrf

string

Specify parameters for a VPN Routing/Forwarding instance

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^router ospf.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

Examples

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete provided OSPF V2 processes
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
      - process_id: 200
        vrf: blue
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospf 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in

# Using deleted without any config passed (NOTE: This will delete all OSPFV2 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv2:
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospf 200 vrf blue",
#        "no router ospf 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router-ios#

- name: Merge provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        areas:
        - area_id: '5'
          capability: true
          authentication:
            enable: true
        - area_id: '10'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
          default_cost: 10
          filter_list:
          - name: test_prefix_in
            direction: in
          - name: test_prefix_out
            direction: out
        network:
          address: 198.51.100.0
          wildcard_bits: 0.0.0.255
          area: 5
        default_information:
          originate: true
        passive_interfaces:
          default: true
          interface:
            set_interface: False
            name:
              - GigabitEthernet0/1
              - GigabitEthernet0/2
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.3.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
        areas:
        - area_id: '10'
          capability: true
        distribute_list:
          acls:
          - name: 10
            direction: out
          - name: 123
            direction: in
    state: merged

# Commands Fired:
# ---------------
#
#  "commands": [
#         "router ospf 200 vrf blue",
#         "auto-cost reference-bandwidth 4",
#         "distribute-list 10 out",
#         "distribute-list 123 in",
#         "domain-id 192.0.3.1",
#         "max-metric router-lsa on-startup 100",
#         "area 10 capability default-exclusion",
#         "router ospf 1",
#         "default-information originate",
#         "max-metric router-lsa on-startup 110",
#         "network 198.51.100.0 0.0.0.255 area 5",
#         "area 10 authentication message-digest",
#         "area 10 default-cost 10",
#         "area 10 nssa translate type7 suppress-fa",
#         "area 10 nssa default-information-originate metric 10",
#         "area 10 filter-list prefix test_prefix_out out",
#         "area 10 filter-list prefix test_prefix_in in",
#         "area 5 authentication",
#         "area 5 capability default-exclusion"
#         "passive-interface default"
#         "no passive-interface GigabitEthernet0/1"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate
#  passive-interface default
#  no passive-interface GigabitEthernet0/1
#  no passive-interface GigabitEthernet0/2

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Override provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.4.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 200
        maximum_paths: 15
        ttl_security:
          hops: 7
        areas:
        - area_id: '10'
          default_cost: 10
          authentication:
            message_digest: true
      - process_id: 100
        vrf: ospf_vrf
        domain_id:
          ip_address:
            address: 192.0.5.1
        auto_cost:
          reference_bandwidth: 5
        areas:
        - area_id: '5'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
    state: overridden

# Commands Fired:
# ---------------
#
# "commands": [
#         "no router ospf 1",
#         "router ospf 100 vrf ospf_vrf",
#         "auto-cost reference-bandwidth 5",
#         "domain-id 192.0.5.1",
#         "area 5 authentication message-digest",
#         "area 5 nssa translate type7 suppress-fa",
#         "area 5 nssa default-information-originate metric 10",
#         "router ospf 200 vrf blue",
#         "no auto-cost reference-bandwidth 4",
#         "no distribute-list 10 out",
#         "no distribute-list 123 in",
#         "domain-id 192.0.4.1",
#         "max-metric router-lsa on-startup 200",
#         "maximum-paths 15",
#         "ttl-security all-interfaces hops 7",
#         "area 10 authentication message-digest",
#         "no area 10 capability default-exclusion",
#         "area 10 default-cost 10"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Replaced provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.4.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 200
        maximum_paths: 15
        ttl_security:
          hops: 7
        areas:
        - area_id: '10'
          default_cost: 10
          authentication:
            message_digest: true
      - process_id: 100
        vrf: ospf_vrf
        domain_id:
          ip_address:
            address: 192.0.5.1
        auto_cost:
          reference_bandwidth: 5
        areas:
        - area_id: '5'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
    state: replaced

# Commands Fired:
# ---------------
# "commands": [
#         "router ospf 100 vrf ospf_vrf",
#         "auto-cost reference-bandwidth 5",
#         "domain-id 192.0.5.1",
#         "area 5 authentication message-digest",
#         "area 5 nssa translate type7 suppress-fa",
#         "area 5 nssa default-information-originate metric 10",
#         "router ospf 200 vrf blue",
#         "no auto-cost reference-bandwidth 4",
#         "no distribute-list 10 out",
#         "no distribute-list 123 in",
#         "domain-id 192.0.4.1",
#         "max-metric router-lsa on-startup 200",
#         "maximum-paths 15",
#         "ttl-security all-interfaces hops 7",
#         "area 10 authentication message-digest",
#         "no area 10 capability default-exclusion",
#         "area 10 default-cost 10"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 5 authentication
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Gather OSPFV2 provided configurations
  cisco.ios.ios_ospfv2:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "5",
#                         "authentication": {
#                             "enable": true
#                         },
#                         "capability": true
#                     },
#                     {
#                         "area_id": "10",
#                         "authentication": {
#                             "message_digest": true
#                         },
#                         "default_cost": 10,
#                         "filter_list": [
#                             {
#                                 "direction": "in",
#                                 "name": "test_prefix_in"
#                             },
#                             {
#                                 "direction": "out",
#                                 "name": "test_prefix_out"
#                             }
#                         ],
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             },
#                             "translate": "suppress-fa"
#                         }
#                     }
#                 ],
#                 "default_information": {
#                     "originate": true
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "network": {
#                     "address": "198.51.100.0",
#                     "area": "5",
#                     "wildcard_bits": "0.0.0.255"
#                 },
#                 "process_id": 1
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "capability": true
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 4
#                 },
#                 "distribute_list": {
#                     "acls": [
#                         {
#                             "direction": "out",
#                             "name": "10"
#                         },
#                         {
#                             "direction": "in",
#                             "name": "123"
#                         }
#                     ]
#                 },
#                 "domain_id": {
#                     "ip_address": {
#                         "address": "192.0.3.1"
#                     }
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 100
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 200,
#                 "vrf": "blue"
#             }
#         ]
#      }

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        areas:
        - area_id: '5'
          capability: true
          authentication:
            enable: true
        - area_id: '10'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
          default_cost: 10
          filter_list:
          - name: test_prefix_in
            direction: in
          - name: test_prefix_out
            direction: out
        network:
          address: 198.51.100.0
          wildcard_bits: 0.0.0.255
          area: 5
        default_information:
          originate: true
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.3.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
        areas:
        - area_id: '10'
          capability: true
        distribute_list:
          acls:
          - name: 10
            direction: out
          - name: 123
            direction: in
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "router ospf 200 vrf blue",
#         "auto-cost reference-bandwidth 4",
#         "distribute-list 10 out",
#         "distribute-list 123 in",
#         "domain-id 192.0.3.1",
#         "max-metric router-lsa on-startup 100",
#         "area 10 capability default-exclusion",
#         "router ospf 1",
#         "default-information originate",
#         "max-metric router-lsa on-startup 110",
#         "network 198.51.100.0 0.0.0.255 area 5",
#         "area 10 authentication message-digest",
#         "area 10 default-cost 10",
#         "area 10 nssa translate type7 suppress-fa",
#         "area 10 nssa default-information-originate metric 10",
#         "area 10 filter-list prefix test_prefix_out out",
#         "area 10 filter-list prefix test_prefix_in in",
#         "area 5 authentication",
#         "area 5 capability default-exclusion"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospf 100
#  auto-cost reference-bandwidth 5
#  domain-id 192.0.5.1
#  area 5 authentication message-digest
#  area 5 nssa translate type7 suppress-fa
#  area 5 nssa default-information-originate metric 10

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ospfv2:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "5",
#                         "authentication": {
#                             "message_digest": true
#                         },
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             },
#                             "translate": "suppress-fa"
#                         }
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 5
#                 },
#                 "domain_id": {
#                     "ip_address": {
#                         "address": "192.0.5.1"
#                     }
#                 },
#                 "process_id": 100
#             }
#         ]
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["router ospf 200 vrf blue", "auto-cost reference-bandwidth 5", "domain-id 192.0.4.1"]

Authors

  • Sumit Jaiswal (@justjais)