cisco.iosxr.iosxr_lacp module – Resource module to configure LACP.

Note

This module is part of the cisco.iosxr collection (version 3.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lacp.

New in cisco.iosxr 1.0.0

Synopsis

  • This module manages Global Link Aggregation Control Protocol (LACP) on IOS-XR devices.

Parameters

Parameter

Comments

config

dictionary

The provided configurations.

system

dictionary

This option sets the default system parameters for LACP bundles.

mac

dictionary

The system MAC related configuration for LACP.

address

string

The system ID to use in LACP negotiations.

priority

integer

The system priority to use in LACP negotiations.

Lower value is higher priority.

Refer to vendor documentation for valid values.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS-XR device by executing the command show running-config lacp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "deleted"

  • "parsed"

  • "rendered"

  • "gathered"

Notes

Note

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:iosxr01#show running-config lacp
# Tue Jul 16 17:46:08.147 UTC
# % No such configuration item(s)
#
#

- name: Merge provided configuration with device configuration
  cisco.iosxr.iosxr_lacp:
    config:
      system:
        priority: 10
        mac:
          address: 00c1.4c00.bd15
    state: merged

#
#
# -----------------------
# Module Execution Result
# -----------------------
#
# "before": {}
#
#
# "commands": [
#    "lacp system priority 10",
#    "lacp system mac 00c1.4c00.bd15"
#  ]
#
#
# "after": {
#    "system": {
#       "mac": {
#          "address": "00c1.4c00.bd15"
#       },
#       "priority": 10
#     }
#  }
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:iosxr01#sh run lacp
# Tue Jul 16 17:51:29.365 UTC
# lacp system mac 00c1.4c00.bd15
# lacp system priority 10
#
#

# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/0/CPU0:iosxr01#sh run lacp
# Tue Jul 16 17:53:59.904 UTC
# lacp system mac 00c1.4c00.bd15
# lacp system priority 10
#

- name: Replace device global lacp configuration with the given configuration
  cisco.iosxr.iosxr_lacp:
    config:
      system:
        priority: 11
    state: replaced
#
#
# -----------------------
# Module Execution Result
# -----------------------
# "before": {
#    "system": {
#       "mac": {
#         "address": "00c1.4c00.bd15"
#       },
#       "priority": 10
#    }
#  }
#
#
# "commands": [
#    "no lacp system mac",
#    "lacp system priority 11"
#  ]
#
#
# "after": {
#    "system": {
#       "priority": 11
#    }
# }
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:iosxr01#sh run lacp
# Tue Jul 16 18:02:40.379 UTC
# lacp system priority 11
#
#

# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:iosxr01#sh run lacp
# Tue Jul 16 18:37:09.727 UTC
# lacp system mac 00c1.4c00.bd15
# lacp system priority 11
#
#

- name: Delete global LACP configurations from the device
  cisco.iosxr.iosxr_lacp:
    state: deleted

#
#
# -----------------------
# Module Execution Result
# -----------------------
# "before": {
#    "system": {
#       "mac": {
#         "address": "00c1.4c00.bd15"
#       },
#       "priority": 11
#    }
# }
#
#
# "commands": [
#     "no lacp system mac",
#     "no lacp system priority"
# ]
#
#
# "after": {}
#
# ------------
# After state
# ------------
#
#
# RP/0/0/CPU0:iosxr01#sh run lacp
# Tue Jul 16 18:39:44.116 UTC
# % No such configuration item(s)
#
#


# Using parsed
# parsed.cfg
# ------------
#
# lacp system mac 00c1.4c00.bd15
# lacp system priority 11
# - name: Convert LACP config to argspec without connecting to the appliance
#   cisco.iosxr.iosxr_lacp:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
#         "system": {
#             "mac": {
#                 "address": "00c1.4c00.bd15"
#             },
#             "priority": 11
#         }
#     }


# Using rendered
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lacp:
    config:
      system:
        priority: 11
        mac:
          address: 00c1.4c00.bd15
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
#         "lacp system priority 11",
#         "lacp system mac 00c1.4c00.bd15"
#     ]


# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config lacp
# lacp system mac 00c1.4c00.bd15
# lacp system priority 11
- name: Gather IOSXR LACP configuration
  cisco.iosxr.iosxr_lacp:
    config:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
#         "system": {
#             "mac": {
#                 "address": "00c1.4c00.bd15"
#             },
#             "priority": 11
#         }
#     }
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config lacp
# lacp system mac 00c1.4c00.bd15
# lacp system priority

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The configuration as structured data after module completion.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration as structured data prior to module invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["lacp system priority 10", "lacp system mac 00c1.4c00.bd15"]

Authors

  • Nilashish Chakraborty (@nilashishc)

  • Rohit Thakur (@rohitthakur2590)