cisco.iosxr.iosxr_ntp_global module – Resource module to configure NTP.

Note

This module is part of the cisco.iosxr collection (version 3.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ntp_global.

New in cisco.iosxr 2.5.0

Synopsis

  • This module configures and manages the attributes of ntp on Cisco IOSXR platforms.

Parameters

Parameter

Comments

config

dictionary

A dictionary of ntp options

access_group

dictionary

Control NTP access

ipv4

dictionary

Configure IPv4 access

peer

string

Provide full access

query_only

string

Allow only control queries.

serve

string

Provide server and query access.

serve_only

string

Provide only server access.

ipv6

dictionary

Configure IPv6 access

peer

string

Provide full access

query_only

string

Allow only control queries.

serve

string

Provide server and query access.

serve_only

string

Provide only server access.

vrfs

list / elements=dictionary

Specify non-default VRF.

ipv4

dictionary

Configure IPv4 access

peer

string

Provide full access

query_only

string

Allow only control queries.

serve

string

Provide server and query access.

serve_only

string

Provide only server access.

ipv6

dictionary

Configure IPv6 access

peer

string

Provide full access

query_only

string

Allow only control queries.

serve

string

Provide server and query access.

serve_only

string

Provide only server access.

name

string

Specify non-default VRF.

authenticate

boolean

Authenticate time sources

Choices:

  • false

  • true

authentication_keys

list / elements=dictionary

Authentication key for trusted time sources

encryption

boolean

Type of key encrypted or clear-text.

Choices:

  • false

  • true

id

integer

<1-65535> Key number

key

string

Authentication key.

broadcastdelay

integer

Estimated round-trip delay in microseconds.

drift

dictionary

Drift(cisco-support)

aging_time

integer

Aging time in hours.

file

string

File for drift values.

interfaces

list / elements=dictionary

Configure NTP on an interface.

broadcast_client

boolean

Listen to NTP broadcasts

Choices:

  • false

  • true

broadcast_destination

string

Configure broadcast destination address.

broadcast_key

integer

Broadcast key number.

broadcast_version

integer

<2-4> NTP version number.

multicast_client

string

Configure multicast client

multicast_destination

string

Configure multicast destination

multicast_key

integer

Configure multicast authentication key.

multicast_ttl

integer

Configure TTL to use.

multicast_version

integer

<2-4> NTP version number.

name

string

Name of the interface.

vrf

string

Name of the vrf.

ipv4

dictionary

Mark the dscp/precedence bit for ipv4 packets.

dscp

string

Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.

precedence

string

Set precedence Please refer vendor document for valid entries.

Choices:

  • "critical"

  • "flash"

  • "flash-override"

  • "immediate"

  • "internet"

  • "network"

  • "priority"

  • "routine"

ipv6

dictionary

Mark the dscp/precedence bit for ipv4 packets.

dscp

string

Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.

precedence

string

Set precedence Please refer vendor document for valid entries.

Choices:

  • "critical"

  • "flash"

  • "flash-override"

  • "immediate"

  • "internet"

  • "network"

  • "priority"

  • "routine"

log_internal_sync

boolean

Logs internal synchronization changes.

Choices:

  • false

  • true

master

dictionary

Act as NTP master clock

stratum

integer

Use NTP as clock source with stratum number <1-15>

max_associations

integer

<0-4294967295> Number of associations.

passive

boolean

Enable the passive associations.

Choices:

  • false

  • true

peers

list / elements=dictionary

Configure NTP peer.

burst

boolean

Use burst mode.

Choices:

  • false

  • true

iburst

boolean

Use initial burst mode.

Choices:

  • false

  • true

key_id

integer

SConfigure peer authentication key

maxpoll

integer

configure Maximum poll interval.

minpoll

integer

configure Minimum poll interval.

peer

string / required

Hostname or A.B.C.D or A:B:C:D:E:F:G:H.

prefer

boolean

Prefer this peer when possible

Choices:

  • false

  • true

source

string

Interface for source address.

version

integer

NTP version.

vrf

string

vrf name.

servers

list / elements=dictionary

Configure NTP server.

burst

boolean

Use burst mode.

Choices:

  • false

  • true

iburst

boolean

Use initial burst mode.

Choices:

  • false

  • true

key_id

integer

SConfigure peer authentication key

maxpoll

integer

configure Maximum poll interval.

minpoll

integer

configure Minimum poll interval.

prefer

boolean

Prefer this peer when possible

Choices:

  • false

  • true

server

string / required

Hostname or A.B.C.D or A:B:C:D:E:F:G:H.

source

string

Interface for source address.

version

integer

NTP version.

vrf

string

vrf name.

source_interface

string

Configure default interface.

source_vrfs

list / elements=dictionary

Configure default interface.

name

string

Name of source interface.

vrf

string

vrf name.

trusted_keys

list / elements=dictionary

list of Key numbers for trusted time sources.

key_id

integer

Key numbers for trusted time sources.

update_calendar

boolean

Periodically update calendar with NTP time.

Choices:

  • false

  • true

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOSXR device by executing the command show running-config ntp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • "deleted"

  • "merged" ← (default)

  • "overridden"

  • "replaced"

  • "gathered"

  • "rendered"

  • "parsed"

Notes

Note

  • Tested against IOSXR 7.0.2.

  • This module works with connection network_cli.

Examples

# Using state: merged
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Merged play:
# ------------
- name: Merge the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_ntp_global:
      config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl1
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/0
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af11
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.1
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/0
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ------------
# "commands": [
#         "ntp peer vrf siteC 192.0.2.1 iburst ",
#         "ntp server vrf siteD 192.0.2.2 burst ",
#         "ntp trusted-key 1",
#         "ntp interface GigabitEthernet0/0/0/0 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/0 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/0 multicast client 224.0.0.8",
#         "ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "ntp access-group ipv4 peer PeerAcl1",
#         "ntp access-group ipv4 serve ServeAcl1",
#         "ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "ntp authenticate",
#         "ntp log-internal-sync",
#         "ntp broadcastdelay 1",
#         "ntp drift aging time 0",
#         "ntp drift file apphost",
#         "ntp ipv4 dscp af11",
#         "ntp ipv6 precedence routine",
#         "ntp max-associations 10",
#         "ntp master 1",
#         "ntp passive",
#         "ntp update-calendar",
#         "ntp source GigabitEthernet0/0/0/0"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Using state: deleted
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Deleted play:
# -------------
- name: Remove all existing configuration
  cisco.iosxr.iosxr_ntp_global:
    state: deleted
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp server vrf siteD 192.0.2.2 burst ",
#         "no ntp trusted-key 1",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "no ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "no ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "no ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "no ntp access-group ipv4 peer PeerAcl1",
#         "no ntp access-group ipv4 serve ServeAcl1",
#         "no ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "no ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "no ntp authenticate",
#         "no ntp log-internal-sync",
#         "no ntp broadcastdelay 1",
#         "no ntp drift aging time 0",
#         "no ntp drift file apphost",
#         "no ntp ipv4 dscp af11",
#         "no ntp ipv6 precedence routine",
#         "no ntp max-associations 10",
#         "no ntp master 1",
#         "no ntp passive",
#         "no ntp update-calendar",
#         "no ntp source GigabitEthernet0/0/0/0"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Using state: overridden
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Overridden play:
# ----------------
- name: Override BGP configuration with provided configuration
  cisco.iosxr.iosxr_ntp_global:
        state: overridden
        config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl4
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/1
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af12
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.3
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/1
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "ntp peer vrf siteC 192.0.2.3 iburst ",
#         "ntp interface GigabitEthernet0/0/0/1 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/1 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/1 multicast client 224.0.0.8",
#         "ntp access-group ipv4 serve ServeAcl4",
#         "ntp ipv4 dscp af12",
#         "ntp source GigabitEthernet0/0/0/1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config ntp
# Mon Sep 13 10:38:22.690 UTC
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/1
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authentication-key 1 md5 encrypted testkey
#  authenticate
#  trusted-key 1
#  ipv4 dscp af12
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.3 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl4
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/1
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
#
# Using state: replaced
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Replaced play:
# ----------------
- name: Replaced BGP configuration with provided configuration
  cisco.iosxr.iosxr_ntp_global:
        state: replaced
        config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl4
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/1
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af12
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.3
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/1
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "ntp peer vrf siteC 192.0.2.3 iburst ",
#         "ntp interface GigabitEthernet0/0/0/1 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/1 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/1 multicast client 224.0.0.8",
#         "ntp access-group ipv4 serve ServeAcl4",
#         "ntp ipv4 dscp af12",
#         "ntp source GigabitEthernet0/0/0/1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config ntp
# Mon Sep 13 10:38:22.690 UTC
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/1
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authentication-key 1 md5 encrypted testkey
#  authenticate
#  trusted-key 1
#  ipv4 dscp af12
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.3 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl4
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/1
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Using state: gathered
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Gathered play:
# --------------
- name: Gather listed ntp config
  cisco.iosxr.iosxr_ntp_global:
    state: gathered
# Module Execution Result:
# ------------------------
# "gathered":{
#         "access_group": {
#             "ipv4": {
#                 "peer": "PeerAcl1",
#                 "query_only": "QueryOnlyAcl1",
#                 "serve": "ServeAcl1",
#                 "serve_only": "ServeOnlyAcl1"
#             },
#             "vrfs": [
#                 {
#                     "ipv4": {
#                         "peer": "PeerAcl3",
#                         "serve": "ServeAcl2"
#                     },
#                     "name": "siteA"
#                 }
#             ]
#         },
#         "authenticate": true,
#         "broadcastdelay": 1,
#         "drift": {
#             "aging_time": 0,
#             "file": "apphost"
#         },
#         "interfaces": [
#             {
#                 "broadcast_client": true,
#                 "multicast_client": "224.0.0.8",
#                 "multicast_destination": "224.0.0.8",
#                 "name": "GigabitEthernet0/0/0/0"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "log_internal_sync": true,
#         "master": 1,
#         "max_associations": 10,
#         "passive": true,
#         "peers": [
#             {
#                 "iburst": true,
#                 "peer": "192.0.2.1",
#                 "vrf": "siteC"
#             }
#         ],
#         "servers": [
#             {
#                 "burst": true,
#                 "server": "192.0.2.2",
#                 "vrf": "siteD"
#             }
#         ],
#         "source": "GigabitEthernet0/0/0/0",
#         "source_vrfs": [
#             {
#                 "name": "GigabitEthernet0/0/0/0",
#                 "vrf": "siteE"
#             }
#         ],
#         "trusted_keys": [
#             {
#                 "key_id": 1
#             }
#         ],
#         "update_calendar": true
#     }
# Using state: rendered
# Rendered play:
# --------------
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.iosxr.iosxr_ntp_global:
    state: rendered
    config:
      access_group:
        ipv4:
          peer: PeerAcl1
          query_only: QueryOnlyAcl1
          serve: ServeAcl1
          serve_only: ServeOnlyAcl1
        vrfs:
          - ipv4:
              peer: PeerAcl3
              serve: ServeAcl2
            name: siteA
      authenticate: true
      broadcastdelay: 1
      drift:
        aging_time: 0
        file: apphost
      interfaces:
        - name: GigabitEthernet0/0/0/0
          multicast_client: 224.0.0.8
          multicast_destination: 224.0.0.8
          broadcast_client: true
      ipv4:
        dscp: af11
      ipv6:
        precedence: routine
      log_internal_sync: true
      master: 1
      max_associations: 10
      passive: true
      peers:
        - iburst: true
          peer: 192.0.2.1
          vrf: siteC
      servers:
        - burst: true
          server: 192.0.2.2
          vrf: siteD
      source: GigabitEthernet0/0/0/0
      source_vrfs:
        - name: GigabitEthernet0/0/0/0
          vrf: siteE
      trusted_keys:
        - key_id: 1
      update_calendar: true
  register: result
# Module Execution Result:
# ------------------------
# "rendered": [
#         "ntp peer vrf siteC 192.0.2.1 iburst ",
#         "ntp server vrf siteD 192.0.2.2 burst ",
#         "ntp trusted-key 1",
#         "ntp interface GigabitEthernet0/0/0/0 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/0 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/0 multicast client 224.0.0.8",
#         "ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "ntp access-group ipv4 peer PeerAcl1",
#         "ntp access-group ipv4 serve ServeAcl1",
#         "ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "ntp authenticate",
#         "ntp log-internal-sync",
#         "ntp broadcastdelay 1",
#         "ntp drift aging time 0",
#         "ntp drift file apphost",
#         "ntp ipv4 dscp af11",
#         "ntp ipv6 precedence routine",
#         "ntp max-associations 10",
#         "ntp master 1",
#         "ntp passive",
#         "ntp update-calendar",
#         "ntp source GigabitEthernet0/0/0/0"
#     ],
# Using state: parsed
# File: parsed.cfg
# ----------------
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Parsed play:
# ------------
- name: Parse the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_ntp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed
# Module Execution Result:
# ------------------------
# "parsed":{
#         "access_group": {
#             "ipv4": {
#                 "peer": "PeerAcl1",
#                 "query_only": "QueryOnlyAcl1",
#                 "serve": "ServeAcl1",
#                 "serve_only": "ServeOnlyAcl1"
#             },
#             "vrfs": [
#                 {
#                     "ipv4": {
#                         "peer": "PeerAcl3",
#                         "serve": "ServeAcl2"
#                     },
#                     "name": "siteA"
#                 }
#             ]
#         },
#         "authenticate": true,
#         "broadcastdelay": 1,
#         "drift": {
#             "aging_time": 0,
#             "file": "apphost"
#         },
#         "interfaces": [
#             {
#                 "broadcast_client": true,
#                 "multicast_client": "224.0.0.8",
#                 "multicast_destination": "224.0.0.8",
#                 "name": "GigabitEthernet0/0/0/0"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "log_internal_sync": true,
#         "master": 1,
#         "max_associations": 10,
#         "passive": true,
#         "peers": [
#             {
#                 "iburst": true,
#                 "peer": "192.0.2.1",
#                 "vrf": "siteC"
#             }
#         ],
#         "servers": [
#             {
#                 "burst": true,
#                 "server": "192.0.2.2",
#                 "vrf": "siteD"
#             }
#         ],
#         "source": "GigabitEthernet0/0/0/0",
#         "source_vrfs": [
#             {
#                 "name": "GigabitEthernet0/0/0/0",
#                 "vrf": "siteE"
#             }
#         ],
#         "trusted_keys": [
#             {
#                 "key_id": 1
#             }
#         ],
#         "update_calendar": true
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["sample command 1", "sample command 2", "sample command 3"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["sample command 1", "sample command 2", "sample command 3"]

Authors

  • Ashwini Mhatre (@amhatre)