cisco.iosxr.iosxr_system module – Module to manage the system attributes.

Note

This module is part of the cisco.iosxr collection (version 3.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.iosxr.iosxr_system.

New in cisco.iosxr 1.0.0

Synopsis

  • This module provides declarative management of node system attributes on Cisco IOS XR devices. It provides an option to configure host system parameters or remove those parameters from the device active configuration.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient >= 0.5.3 when using netconf

  • lxml >= 4.1.1 when using netconf

Parameters

Parameter

Comments

domain_name

string

Configure the IP domain name on the remote device to the provided value. Value should be in the dotted name form and will be appended to the hostname to create a fully-qualified domain name.

list / elements=string

Provides the list of domain suffixes to append to the hostname for the purpose of doing name resolution. This argument accepts a list of names and will be reconciled with the current active configuration on the running node.

hostname

string

Configure the device hostname parameter. This option takes an ASCII string value.

lookup_enabled

boolean

Provides administrative control for enabling or disabling DNS lookups. When this argument is set to True, lookups are performed and when it is set to False, lookups are not performed.

Choices:

  • false

  • true ← (default)

lookup_source

string

The lookup_source argument provides one or more source interfaces to use for performing DNS lookups. The interface provided in lookup_source must be a valid interface configured on the device.

name_servers

list / elements=string

The name_serves argument accepts a list of DNS name servers by way of either FQDN or IP address to use to perform name resolution lookups. This argument accepts wither a list of DNS servers See examples.

provider

dictionary

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

For more information please see the Network Guide.


A dict object containing connection details.

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Specifies the port to use when building the connection to the remote device.

ssh_keyfile

path

Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

transport

string

Specifies the type of connection based transport.

Choices:

  • "cli" ← (default)

  • "netconf"

username

string

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

state

string

State of the configuration values in the device’s current active configuration. When set to present, the values should be configured in the device active configuration and when set to absent the values should not be in the device active configuration

Choices:

  • "present" ← (default)

  • "absent"

vrf

string

VRF name for domain services

Default: "default"

Notes

Note

  • This module works with connection network_cli and netconf. See the IOS-XR Platform Options.

  • name-servers state=absent operation with netconf transport is a success, but with rpc-error. This is due to XR platform issue. Recommended to use ignore_errors option with the task as a workaround.

  • For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`

  • For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.

Examples

- name: configure hostname and domain-name (default vrf=default)
  cisco.iosxr.iosxr_system:
    hostname: iosxr01
    domain_name: test.example.com
    domain_search:
    - ansible.com
    - redhat.com
    - cisco.com
- name: remove configuration
  cisco.iosxr.iosxr_system:
    hostname: iosxr01
    domain_name: test.example.com
    domain_search:
    - ansible.com
    - redhat.com
    - cisco.com
    state: absent
- name: configure hostname and domain-name with vrf
  cisco.iosxr.iosxr_system:
    hostname: iosxr01
    vrf: nondefault
    domain_name: test.example.com
    domain_search:
    - ansible.com
    - redhat.com
    - cisco.com
- name: configure DNS lookup sources
  cisco.iosxr.iosxr_system:
    lookup_source: MgmtEth0/0/CPU0/0
    lookup_enabled: true
- name: configure name servers
  cisco.iosxr.iosxr_system:
    name_servers:
    - 8.8.8.8
    - 8.8.4.4

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

The list of configuration mode commands to send to the device

Returned: always

Sample: ["hostname iosxr01", "ip domain-name test.example.com"]

xml

list / elements=string

NetConf rpc xml sent to device with transport netconf

Returned: always (empty list when no xml rpc to send)

Sample: ["<config xmlns:xc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"> <ip-domain xmlns=\"http://cisco.com/ns/yang/Cisco-IOS-XR-ip-domain-cfg\"> <vrfs> <vrf> <vrf-name>default</vrf-name> <lists> <list xc:operation=\"merge\"> <order>0</order> <list-name>redhat.com</list-name> </list> </lists> </vrf> </vrfs> </ip-domain> </config>"]

Authors

  • Peter Sprygada (@privateip)

  • Kedar Kekan (@kedarX)