cisco.ise.radius_server_sequence module – Resource module for RADIUS Server Sequence
Note
This module is part of the cisco.ise collection (version 2.5.9).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.ise
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.ise.radius_server_sequence
.
New in cisco.ise 1.0.0
Synopsis
Manage operations create, update and delete of the resource RADIUS Server Sequence.
This API creates a RADIUS server sequence.
This API deletes a RADIUS server sequence.
This API allows the client to update a RADIUS server sequence.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
ciscoisesdk >= 2.0.8
python >= 3.5
Parameters
Parameter |
Comments |
---|---|
The beforeAcceptAttrManipulators is required only if useAttrSetBeforeAcc is true. |
|
Allowed Values - ADD, - UPDATE, - REMOVE, - REMOVEANY. |
|
RADIUS Server Sequence’s attributeName. |
|
The changedVal is required only if the action equals to ‘UPDATE’. |
|
RADIUS Server Sequence’s dictionaryName. |
|
RADIUS Server Sequence’s value. |
|
ContinueAuthorzPolicy flag. Choices:
|
|
RADIUS Server Sequence’s description. |
|
RADIUS Server Sequence’s id. |
|
Flag for Identity Services Engine SDK to enable debugging. Choices:
|
|
The Identity Services Engine hostname. |
|
The Identity Services Engine password to authenticate. |
|
The Identity Services Engine username to authenticate. |
|
Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices:
|
|
Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices:
|
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Identity Services Engine to use. Default: |
|
Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices:
|
|
LocalAccounting flag. Choices:
|
|
RADIUS Server Sequence’s name. |
|
The onRequestAttrManipulators is required only if useAttrSetOnRequest is true. |
|
Allowed Values - ADD, - UPDATE, - REMOVE, - REMOVEANY. |
|
RADIUS Server Sequence’s attributeName. |
|
The changedVal is required only if the action equals to ‘UPDATE’. |
|
RADIUS Server Sequence’s dictionaryName. |
|
RADIUS Server Sequence’s value. |
|
The prefixSeparator is required only if stripPrefix is true. The maximum length is 1 character. |
|
RADIUS Server Sequence’s RADIUSServerList. |
|
RemoteAccounting flag. Choices:
|
|
StripPrefix flag. Choices:
|
|
StripSuffix flag. Choices:
|
|
The suffixSeparator is required only if stripSuffix is true. The maximum length is 1 character. |
|
UseAttrSetBeforeAcc flag. Choices:
|
|
UseAttrSetOnRequest flag. Choices:
|
Notes
Note
SDK Method used are radius_server_sequence.RadiusServerSequence.create_radius_server_sequence, radius_server_sequence.RadiusServerSequence.delete_radius_server_sequence_by_id, radius_server_sequence.RadiusServerSequence.update_radius_server_sequence_by_id,
Paths used are post /ers/config/radiusserversequence, delete /ers/config/radiusserversequence/{id}, put /ers/config/radiusserversequence/{id},
Does not support
check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection
Examples
- name: Update by id
cisco.ise.radius_server_sequence:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: present
BeforeAcceptAttrManipulatorsList:
- action: string
attributeName: string
changedVal: string
dictionaryName: string
value: string
OnRequestAttrManipulatorList:
- action: string
attributeName: string
changedVal: string
dictionaryName: string
value: string
RadiusServerList:
- string
continueAuthorzPolicy: true
description: string
id: string
localAccounting: true
name: string
prefixSeparator: string
remoteAccounting: true
stripPrefix: true
stripSuffix: true
suffixSeparator: string
useAttrSetBeforeAcc: true
useAttrSetOnRequest: true
- name: Delete by id
cisco.ise.radius_server_sequence:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: absent
id: string
- name: Create
cisco.ise.radius_server_sequence:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: present
BeforeAcceptAttrManipulatorsList:
- action: string
attributeName: string
changedVal: string
dictionaryName: string
value: string
OnRequestAttrManipulatorList:
- action: string
attributeName: string
changedVal: string
dictionaryName: string
value: string
RadiusServerList:
- string
continueAuthorzPolicy: true
description: string
localAccounting: true
name: string
prefixSeparator: string
remoteAccounting: true
stripPrefix: true
stripSuffix: true
suffixSeparator: string
useAttrSetBeforeAcc: true
useAttrSetOnRequest: true
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: |
|
A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: |