cisco.nxos.nxos_install_os module – Set boot options like boot, kickstart image and issu.
Note
This module is part of the cisco.nxos collection (version 3.2.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_install_os
.
New in cisco.nxos 1.0.0
Synopsis
Install an operating system by setting the boot options like boot image and kickstart image and optionally select to install using ISSU (In Server Software Upgrade).
Note
This module has a corresponding action plugin.
Parameters
Parameter |
Comments |
---|---|
Upgrade using In Service Software Upgrade (ISSU). (Supported on N5k, N7k, N9k platforms) Selecting ‘required’ or ‘yes’ means that upgrades will only proceed if the switch is capable of ISSU. Selecting ‘desired’ means that upgrades will use ISSU if possible but will fall back to disruptive upgrade if needed. Selecting ‘no’ means do not use ISSU. Forced disruptive. Choices:
|
|
Name of the kickstart image file on flash. (Not required on all Nexus platforms) |
|
Deprecated Starting with Ansible 2.5 we recommend using Starting with Ansible 2.6 we recommend using This option will be removed in a release after 2022-06-01. For more information please see the https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html. A dict object containing connection details. |
|
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable |
|
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable Choices:
|
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable |
|
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443). |
|
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable |
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc). |
|
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi. Choices:
|
|
If Choices:
|
|
Configures the transport to use SSL if set to Choices:
|
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable |
|
If Choices:
|
|
Name of the system (or combined) image file on flash. |
Notes
Note
Tested against the following platforms and images - N9k 7.0(3)I4(6), 7.0(3)I5(3), 7.0(3)I6(1), 7.0(3)I7(1), 7.0(3)F2(2), 7.0(3)F3(2) - N3k 6.0(2)A8(6), 6.0(2)A8(8), 7.0(3)I6(1), 7.0(3)I7(1) - N7k 7.3(0)D1(1), 8.0(1), 8.1(1), 8.2(1)
Tested against Cisco MDS NX-OS 9.2(1)
This module requires both the ANSIBLE_PERSISTENT_CONNECT_TIMEOUT and ANSIBLE_PERSISTENT_COMMAND_TIMEOUT timers to be set to 600 seconds or higher. The module will exit if the timers are not set properly.
When using connection local, ANSIBLE_PERSISTENT_CONNECT_TIMEOUT and ANSIBLE_PERSISTENT_COMMAND_TIMEOUT can only be set using ENV variables or the ansible.cfg file.
Do not include full file paths, just the name of the file(s) stored on the top level flash directory.
This module attempts to install the software immediately, which may trigger a reboot.
In check mode, the module will indicate if an upgrade is needed and whether or not the upgrade is disruptive or non-disruptive(ISSU).
For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- name: Install OS on N9k
check_mode: no
cisco.nxos.nxos_install_os:
system_image_file: nxos.7.0.3.I6.1.bin
issu: desired
- name: Wait for device to come back up with new image
wait_for:
port: 22
state: started
timeout: 500
delay: 60
host: '{{ inventory_hostname }}'
- name: Check installed OS for newly installed version
nxos_command:
commands: [show version | json]
provider: '{{ connection }}'
register: output
- assert:
that:
- output['stdout'][0]['kickstart_ver_str'] == '7.0(3)I6(1)'
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Boot and install information. Returned: always Sample: |