cisco.ucs.ucs_system_qos module – Configures system QoS settings
Note
This module is part of the cisco.ucs collection (version 1.8.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.ucs
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.ucs.ucs_system_qos
.
New in cisco.ucs 2.1
Synopsis
Configures system QoS settings
Requirements
The below requirements are needed on the host that executes this module.
ucsmsdk
Parameters
Parameter |
Comments |
---|---|
Admin state of QoS Policy Choices:
|
|
CoS setting Choices:
|
|
Set multicast optimization options Choices:
|
|
IP address or hostname of Cisco UCS Manager. Modules can be used with the UCS Platform Emulator https://cs.co/ucspe |
|
MTU size Choices:
|
|
Set multicast optimization options Choices:
|
|
Password for Cisco UCS Manager authentication. |
|
Port number to be used during connection (by default uses 443 for https and 80 for http connection). |
|
Priority to configure Choices:
|
|
If use_proxy is no, specfies proxy to be used for connection. e.g. ‘http://proxy.xy.z:8080’ |
|
If Choices:
|
|
If Choices:
|
|
Username for Cisco UCS Manager authentication. Default: |
|
CoS profile weight Choices:
|
Examples
- name:
cisco.ucs.ucs_system_qos:
priority: platinum
admin_state: enabled
multicast_optimize: no
cos: '5'
weight: '10'
mtu: '9216'
hostname: 192.168.99.100
username: admin
password: password