cisco.ucs.ucs_vlan_to_group module – Add VLANs to a VLAN Group. Requires VLAN and VLAN Group to already be created on UCS prior to running module.
Note
This module is part of the cisco.ucs collection (version 1.8.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.ucs
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.ucs.ucs_vlan_to_group
.
New in cisco.ucs 2.10
Synopsis
Add VLANs to VLAN Groups on Cisco UCS Manager.
Requirements
The below requirements are needed on the host that executes this module.
ucsmsdk
Parameters
Parameter |
Comments |
---|---|
IP address or hostname of Cisco UCS Manager. Modules can be used with the UCS Platform Emulator https://cs.co/ucspe |
|
Password for Cisco UCS Manager authentication. |
|
Port number to be used during connection (by default uses 443 for https and 80 for http connection). |
|
If use_proxy is no, specfies proxy to be used for connection. e.g. ‘http://proxy.xy.z:8080’ |
|
If If Choices:
|
|
If Choices:
|
|
If Choices:
|
|
Username for Cisco UCS Manager authentication. Default: |
|
The name assigned to the VLAN Group. The VLAN Group name is case sensitive. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), “_” (underscore), : (colon), and . (period). |
|
The name assigned to the VLAN. The VLAN name is case sensitive. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), “_” (underscore), : (colon), and . (period). |
Examples
- name: Configure VLAN
cisco.ucs.ucs_vlan_to_group:
hostname: 1.1.1.1
username: admin
password: password
vlangroup: VLANGROUP
vlanname: VLANNAME
state: present
- name: Remove VLAN
cisco.ucs.ucs_vlan_to_group:
hostname: 1.1.1.1
username: admin
password: password
vlangroup: VLANGROUP
vlanname: VLANNAME
state: absent