You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

community.aws.aws_direct_connect_connection module – Creates, deletes, modifies a DirectConnect connection

Note

This module is part of the community.aws collection (version 3.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.aws. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.aws.aws_direct_connect_connection.

New in community.aws 1.0.0

Synopsis 

Create, update, or delete a Direct Connect connection between a network and a specific AWS Direct Connect location. Upon creation the connection may be added to a link aggregation group or established as a standalone connection. The connection may later be associated or disassociated with a link aggregation group.

Requirements 

The below requirements are needed on the host that executes this module.

python >= 3.6
boto3 >= 1.16.0
botocore >= 1.19.0

Parameters 

Parameter	Comments
aws_access_key aliases: ec2_access_key, access_key string	`AWS access key`. If not set then the value of the `AWS_ACCESS_KEY_ID`, `AWS_ACCESS_KEY` or `EC2_ACCESS_KEY` environment variable is used. If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01.
aws_ca_bundle path	The location of a CA Bundle to use when validating SSL certificates. Not used by boto 2 based modules. Note: The CA Bundle is read ‘module’ side and may need to be explicitly copied from the controller if not run locally.
aws_config dictionary	A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the ‘user_agent’ key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration.
aws_secret_key aliases: ec2_secret_key, secret_key string	`AWS secret key`. If not set then the value of the `AWS_SECRET_ACCESS_KEY`, `AWS_SECRET_KEY`, or `EC2_SECRET_KEY` environment variable is used. If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01.
bandwidth string	The bandwidth of the Direct Connect connection. Required when state=present. Choices: `"1Gbps"` `"10Gbps"`
connection_id string	The ID of the Direct Connect connection. Modifying attributes of a connection with forced_update will result in a new Direct Connect connection ID. One of connection_id or name must be specified.
debug_botocore_endpoint_logs boolean	Use a botocore.endpoint logger to parse the unique (rather than total) “resource:action” API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used. Choices: `false` ← (default) `true`
ec2_url aliases: aws_endpoint_url, endpoint_url string	URL to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
forced_update boolean	To modify bandwidth or location the connection needs to be deleted and recreated. By default this will not happen. This option must be explicitly set to `true` to change bandwith or location. Choices: `false` ← (default) `true`
link_aggregation_group string	The ID of the link aggregation group you want to associate with the connection. This is optional when a stand-alone connection is desired.
location string	Where the Direct Connect connection is located. Required when state=present.
name string	The name of the Direct Connect connection. This is required to create a new connection. One of connection_id or name must be specified.
profile aliases: aws_profile string	Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01.
region aliases: aws_region, ec2_region string	The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region
security_token aliases: aws_session_token, session_token, aws_security_token, access_token string	`AWS STS security token`. If not set then the value of the `AWS_SECURITY_TOKEN` or `EC2_SECURITY_TOKEN` environment variable is used. If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. Aliases aws_session_token and session_token have been added in version 3.2.0.
state string / required	The state of the Direct Connect connection. Choices: `"present"` `"absent"`
validate_certs boolean	When set to “no”, SSL certificates will not be validated for communication with the AWS APIs. Choices: `false` `true` ← (default)

Notes 

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_PROFILE or AWS_DEFAULT_PROFILE, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION, AWS_CA_BUNDLE
When no credentials are explicitly provided the AWS SDK (boto3) that Ansible uses will fall back to its configuration files (typically ~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.
Modules based on the original AWS SDK (boto) may read their default configuration from different files. See https://boto.readthedocs.io/en/latest/boto_config_tut.html for more information.
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be defined in the configuration files.

Examples 

# create a Direct Connect connection
- community.aws.aws_direct_connect_connection:
    name: ansible-test-connection
    state: present
    location: EqDC2
    link_aggregation_group: dxlag-xxxxxxxx
    bandwidth: 1Gbps
  register: dc

# disassociate the LAG from the connection
- community.aws.aws_direct_connect_connection:
    state: present
    connection_id: dc.connection.connection_id
    location: EqDC2
    bandwidth: 1Gbps

# replace the connection with one with more bandwidth
- community.aws.aws_direct_connect_connection:
    state: present
    name: ansible-test-connection
    location: EqDC2
    bandwidth: 10Gbps
    forced_update: true

# delete the connection
- community.aws.aws_direct_connect_connection:
    state: absent
    name: ansible-test-connection

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
connection complex	The attributes of the direct connect connection. Returned: state=present
aws_device string	The endpoint which the physical connection terminates on. Returned: when the requested state is no longer ‘requested’ Sample: `"EqDC2-12pmo7hemtz1z"`
bandwidth string	The bandwidth of the connection. Returned: always Sample: `"1Gbps"`
connection_id string	The ID of the connection. Returned: always Sample: `"dxcon-ffy9ywed"`
connection_name string	The name of the connection. Returned: always Sample: `"ansible-test-connection"`
connection_state string	The state of the connection. Returned: always Sample: `"pending"`
loa_issue_time string	The issue time of the connection’s Letter of Authorization - Connecting Facility Assignment. Returned: when the LOA-CFA has been issued (the connection state will no longer be ‘requested’) Sample: `"2018-03-20T17:36:26-04:00"`
location string	The location of the connection. Returned: always Sample: `"EqDC2"`
owner_account string	The account that owns the direct connect connection. Returned: always Sample: `"123456789012"`
region string	The region in which the connection exists. Returned: always Sample: `"us-east-1"`

Authors

Sloane Hertel (@s-hertel)

Collection links

Issue Tracker Repository (Sources) Communication

community.aws.aws_direct_connect_connection module – Creates, deletes, modifies a DirectConnect connection

Synopsis

Requirements

Parameters

Notes

Examples

Return Values