community.aws.ec2_vpc_nacl module – create and delete Network ACLs.
Note
This module is part of the community.aws collection (version 3.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.aws
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.ec2_vpc_nacl
.
New in community.aws 1.0.0
Synopsis
Read the AWS documentation for Network ACLS https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.16.0
botocore >= 1.19.0
Parameters
Parameter |
Comments |
---|---|
If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
The location of a CA Bundle to use when validating SSL certificates. Not used by boto 2 based modules. Note: The CA Bundle is read ‘module’ side and may need to be explicitly copied from the controller if not run locally. |
|
A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the ‘user_agent’ key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration. |
|
If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
Use a botocore.endpoint logger to parse the unique (rather than total) “resource:action” API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used. Choices:
|
|
URL to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. |
|
A list of rules for outgoing traffic. Each rule must be specified as a list. Each rule may contain the rule number (integer 1-32766), protocol (one of [‘tcp’, ‘udp’, ‘icmp’, ‘ipv6-icmp’, ‘-1’, ‘all’]), the rule action (‘allow’ or ‘deny’) the CIDR of the IPv4 or IPv6 network range to allow or deny, the ICMP type (-1 means all types), the ICMP code (-1 means all codes), the last port in the range for TCP or UDP protocols, and the first port in the range for TCP or UDP protocols. See examples. Default: |
|
List of rules for incoming traffic. Each rule must be specified as a list. Each rule may contain the rule number (integer 1-32766), protocol (one of [‘tcp’, ‘udp’, ‘icmp’, ‘ipv6-icmp’, ‘-1’, ‘all’]), the rule action (‘allow’ or ‘deny’) the CIDR of the IPv4 or IPv6 network range to allow or deny, the ICMP type (-1 means all types), the ICMP code (-1 means all codes), the last port in the range for TCP or UDP protocols, and the first port in the range for TCP or UDP protocols. See examples. Default: |
|
NACL id identifying a network ACL. One and only one of the name or nacl_id is required. |
|
Tagged name identifying a network ACL. One and only one of the name or nacl_id is required. |
|
Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. |
|
The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region |
|
If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. Aliases aws_session_token and session_token have been added in version 3.2.0. |
|
Creates or modifies an existing NACL Deletes a NACL and reassociates subnets to the default NACL Choices:
|
|
The list of subnets that should be associated with the network ACL. Must be specified as a list Each subnet can be specified as subnet ID, or its tagged name. |
|
Dictionary of tags to look for and apply when creating a network ACL. |
|
When set to “no”, SSL certificates will not be validated for communication with the AWS APIs. Choices:
|
|
VPC id of the requesting VPC. Required when state present. |
Notes
Note
If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence
AWS_URL
orEC2_URL
,AWS_PROFILE
orAWS_DEFAULT_PROFILE
,AWS_ACCESS_KEY_ID
orAWS_ACCESS_KEY
orEC2_ACCESS_KEY
,AWS_SECRET_ACCESS_KEY
orAWS_SECRET_KEY
orEC2_SECRET_KEY
,AWS_SECURITY_TOKEN
orEC2_SECURITY_TOKEN
,AWS_REGION
orEC2_REGION
,AWS_CA_BUNDLE
When no credentials are explicitly provided the AWS SDK (boto3) that Ansible uses will fall back to its configuration files (typically
~/.aws/credentials
). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.Modules based on the original AWS SDK (boto) may read their default configuration from different files. See https://boto.readthedocs.io/en/latest/boto_config_tut.html for more information.
AWS_REGION
orEC2_REGION
can be typically be used to specify the AWS region, when required, but this can also be defined in the configuration files.
Examples
# Complete example to create and delete a network ACL
# that allows SSH, HTTP and ICMP in, and all traffic out.
- name: "Create and associate production DMZ network ACL with DMZ subnets"
community.aws.ec2_vpc_nacl:
vpc_id: vpc-12345678
name: prod-dmz-nacl
region: ap-southeast-2
subnets: ['prod-dmz-1', 'prod-dmz-2']
tags:
CostCode: CC1234
Project: phoenix
Description: production DMZ
ingress:
# rule no, protocol, allow/deny, cidr, icmp_type, icmp_code,
# port from, port to
- [100, 'tcp', 'allow', '0.0.0.0/0', null, null, 22, 22]
- [200, 'tcp', 'allow', '0.0.0.0/0', null, null, 80, 80]
- [205, 'tcp', 'allow', '::/0', null, null, 80, 80]
- [300, 'icmp', 'allow', '0.0.0.0/0', 0, 8]
- [305, 'ipv6-icmp', 'allow', '::/0', 0, 8]
egress:
- [100, 'all', 'allow', '0.0.0.0/0', null, null, null, null]
- [105, 'all', 'allow', '::/0', null, null, null, null]
state: 'present'
- name: "Remove the ingress and egress rules - defaults to deny all"
community.aws.ec2_vpc_nacl:
vpc_id: vpc-12345678
name: prod-dmz-nacl
region: ap-southeast-2
subnets:
- prod-dmz-1
- prod-dmz-2
tags:
CostCode: CC1234
Project: phoenix
Description: production DMZ
state: present
- name: "Remove the NACL subnet associations and tags"
community.aws.ec2_vpc_nacl:
vpc_id: 'vpc-12345678'
name: prod-dmz-nacl
region: ap-southeast-2
state: present
- name: "Delete nacl and subnet associations"
community.aws.ec2_vpc_nacl:
vpc_id: vpc-12345678
name: prod-dmz-nacl
state: absent
- name: "Delete nacl by its id"
community.aws.ec2_vpc_nacl:
nacl_id: acl-33b4ee5b
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The id of the NACL (when creating or updating an ACL) Returned: success Sample: |
|
The result of the create, or delete action. Returned: success |