community.aws.ec2_vpc_vpn module – Create, modify, and delete EC2 VPN connections.
Note
This module is part of the community.aws collection (version 3.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.aws
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.ec2_vpc_vpn
.
New in community.aws 1.0.0
Synopsis
This module creates, modifies, and deletes VPN connections. Idempotence is achieved by using the filters option or specifying the VPN connection identifier.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.16.0
botocore >= 1.19.0
Parameters
Parameter |
Comments |
---|---|
If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
The location of a CA Bundle to use when validating SSL certificates. Not used by boto 2 based modules. Note: The CA Bundle is read ‘module’ side and may need to be explicitly copied from the controller if not run locally. |
|
A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the ‘user_agent’ key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration. |
|
If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
The type of VPN connection. At this time only Default: |
|
The ID of the customer gateway. |
|
Use a botocore.endpoint logger to parse the unique (rather than total) “resource:action” API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used. Choices:
|
|
The time, in seconds, to wait before checking operation again. Default: |
|
URL to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. |
|
An alternative to using vpn_connection_id. If multiple matches are found, vpn_connection_id is required. If one of the following suboptions is a list of items to filter by, only one item needs to match to find the VPN that correlates. e.g. if the filter cidr is |
|
The BGP ASN number associated with a BGP device. Only works if the connection is attached. This filtering option is currently not working. |
|
The customer gateway id as a string or a list of those strings. |
|
The customer gateway configuration of the VPN as a string (in the format of the return value) or a list of those strings. |
|
The destination cidr of the VPN’s route as a string or a list of those strings. |
|
The type of routing; |
|
The key of a tag as a string or a list of those strings. |
|
The value of a tag as a string or a list of those strings. |
|
A dict of key value pairs. |
|
The virtual private gateway as a string or a list of those strings. |
|
The VPN connection id as a string or a list of those strings. |
|
Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. |
|
Whether or not to delete VPN connections routes that are not specified in the task. Choices:
|
|
Whether or not to delete VPN connections tags that are associated with the connection but not specified in the task. Choices:
|
|
The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region |
|
Routes to add to the connection. |
|
If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. Aliases aws_session_token and session_token have been added in version 3.2.0. |
|
The desired state of the VPN connection. Choices:
|
|
Indicates whether the VPN connection uses static routes only. Static routes must be used for devices that don’t support BGP. Choices:
|
|
Tags to attach to the VPN connection. |
|
An optional list object containing no more than two dict members, each of which may contain TunnelInsideCidr and/or PreSharedKey keys with appropriate string values. AWS defaults will apply in absence of either of the aforementioned keys. |
|
The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and customer gateway. |
|
The range of inside IP addresses for the tunnel. |
|
When set to “no”, SSL certificates will not be validated for communication with the AWS APIs. Choices:
|
|
The ID of the VPN connection. Required to modify or delete a connection if the filters option does not provide a unique match. |
|
The ID of the virtual private gateway. |
|
How long, in seconds, before wait gives up. Default: |
Notes
Note
If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence
AWS_URL
orEC2_URL
,AWS_PROFILE
orAWS_DEFAULT_PROFILE
,AWS_ACCESS_KEY_ID
orAWS_ACCESS_KEY
orEC2_ACCESS_KEY
,AWS_SECRET_ACCESS_KEY
orAWS_SECRET_KEY
orEC2_SECRET_KEY
,AWS_SECURITY_TOKEN
orEC2_SECURITY_TOKEN
,AWS_REGION
orEC2_REGION
,AWS_CA_BUNDLE
When no credentials are explicitly provided the AWS SDK (boto3) that Ansible uses will fall back to its configuration files (typically
~/.aws/credentials
). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.Modules based on the original AWS SDK (boto) may read their default configuration from different files. See https://boto.readthedocs.io/en/latest/boto_config_tut.html for more information.
AWS_REGION
orEC2_REGION
can be typically be used to specify the AWS region, when required, but this can also be defined in the configuration files.
Examples
# Note: None of these examples set aws_access_key, aws_secret_key, or region.
# It is assumed that their matching environment variables are set.
- name: create a VPN connection
community.aws.ec2_vpc_vpn:
state: present
vpn_gateway_id: vgw-XXXXXXXX
customer_gateway_id: cgw-XXXXXXXX
- name: modify VPN connection tags
community.aws.ec2_vpc_vpn:
state: present
vpn_connection_id: vpn-XXXXXXXX
tags:
Name: ansible-tag-1
Other: ansible-tag-2
- name: delete a connection
community.aws.ec2_vpc_vpn:
vpn_connection_id: vpn-XXXXXXXX
state: absent
- name: modify VPN tags (identifying VPN by filters)
community.aws.ec2_vpc_vpn:
state: present
filters:
cidr: 194.168.1.0/24
tag-keys:
- Ansible
- Other
tags:
New: Tag
purge_tags: true
static_only: true
- name: set up VPN with tunnel options utilizing 'TunnelInsideCidr' only
community.aws.ec2_vpc_vpn:
state: present
filters:
vpn: vpn-XXXXXXXX
static_only: true
tunnel_options:
-
TunnelInsideCidr: '169.254.100.1/30'
-
TunnelInsideCidr: '169.254.100.5/30'
- name: add routes and remove any preexisting ones
community.aws.ec2_vpc_vpn:
state: present
filters:
vpn: vpn-XXXXXXXX
routes:
- 195.168.2.0/24
- 196.168.2.0/24
purge_routes: true
- name: remove all routes
community.aws.ec2_vpc_vpn:
state: present
vpn_connection_id: vpn-XXXXXXXX
routes: []
purge_routes: true
- name: delete a VPN identified by filters
community.aws.ec2_vpc_vpn:
state: absent
filters:
tags:
Ansible: Tag
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
If the VPN connection has changed. Returned: always Sample: |
|
The configuration of the VPN connection. Returned: state=present |
|
The customer gateway connected via the connection. Returned: state=present Sample: |
|
The VPN connection options (currently only containing static_routes_only). Returned: state=present |
|
If the VPN connection only allows static routes. Returned: state=present Sample: |
|
The routes of the VPN connection. Returned: state=present Sample: |
|
The status of the VPN connection. Returned: state=present Sample: |
|
The tags associated with the connection. Returned: state=present Sample: |
|
The type of VPN connection (currently only ipsec.1 is available). Returned: state=present Sample: |
|
The telemetry for the VPN tunnel. Returned: state=present Sample: |
|
The identifier for the VPN connection. Returned: state=present Sample: |
|
The virtual private gateway connected via the connection. Returned: state=present Sample: |