community.aws.ecs_taskdefinition_info module – Describe a task definition in ECS
Note
This module is part of the community.aws collection (version 3.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.aws
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.ecs_taskdefinition_info
.
New in community.aws 1.0.0
Synopsis
Describes a task definition in ECS.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.16.0
botocore >= 1.19.0
Parameters
Parameter |
Comments |
---|---|
If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
The location of a CA Bundle to use when validating SSL certificates. Not used by boto 2 based modules. Note: The CA Bundle is read ‘module’ side and may need to be explicitly copied from the controller if not run locally. |
|
A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the ‘user_agent’ key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration. |
|
If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
Use a botocore.endpoint logger to parse the unique (rather than total) “resource:action” API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used. Choices:
|
|
URL to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. |
|
Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. |
|
The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region |
|
If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. Aliases aws_session_token and session_token have been added in version 3.2.0. |
|
The name of the task definition to get details for |
|
When set to “no”, SSL certificates will not be validated for communication with the AWS APIs. Choices:
|
Notes
Note
For details of the parameters and returns see http://boto3.readthedocs.io/en/latest/reference/services/ecs.html#ECS.Client.describe_task_definition
If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence
AWS_URL
orEC2_URL
,AWS_PROFILE
orAWS_DEFAULT_PROFILE
,AWS_ACCESS_KEY_ID
orAWS_ACCESS_KEY
orEC2_ACCESS_KEY
,AWS_SECRET_ACCESS_KEY
orAWS_SECRET_KEY
orEC2_SECRET_KEY
,AWS_SECURITY_TOKEN
orEC2_SECURITY_TOKEN
,AWS_REGION
orEC2_REGION
,AWS_CA_BUNDLE
When no credentials are explicitly provided the AWS SDK (boto3) that Ansible uses will fall back to its configuration files (typically
~/.aws/credentials
). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.Modules based on the original AWS SDK (boto) may read their default configuration from different files. See https://boto.readthedocs.io/en/latest/boto_config_tut.html for more information.
AWS_REGION
orEC2_REGION
can be typically be used to specify the AWS region, when required, but this can also be defined in the configuration files.
Examples
# Note: These examples do not set authentication details, see the AWS Guide for details.
- community.aws.ecs_taskdefinition_info:
task_definition: test-td
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Returns a list of complex objects representing the containers Returned: success |
|
The command that is passed to the container. Returned: when present |
|
The number of cpu units reserved for the container. Returned: always |
|
When this parameter is true, networking is disabled within the container. Returned: when present |
|
A list of DNS search domains that are presented to the container. Returned: when present |
|
A list of DNS servers that are presented to the container. Returned: when present |
|
A key/value map of labels to add to the container. Returned: when present |
|
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. Returned: when present |
|
The entry point that is passed to the container. Returned: when present |
|
The environment variables to pass to a container. Returned: always |
|
The name of the environment variable. Returned: when present |
|
The value of the environment variable. Returned: when present |
|
Whether this is an essential container or not. Returned: always |
|
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. Returned: when present |
|
The hostname to use in the /etc/hosts entry. Returned: when present |
|
The IP address to use in the /etc/hosts entry. Returned: when present |
|
The hostname to use for your container. Returned: when present |
|
The image used to start a container. Returned: always |
|
Links to other containers. Returned: when present |
|
The log configuration specification for the container. Returned: when present |
|
The soft limit (in MiB) of memory to reserve for the container. Returned: when present |
|
The mount points for data volumes in your container. Returned: always |
|
The path on the container to mount the host volume at. Returned: when present |
|
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. Returned: when present |
|
The name of the volume to mount. Returned: when present |
|
The name of a container. Returned: always |
|
The configuration options to send to the log driver. Returned: when present |
|
The list of port mappings for the container. Returned: always |
|
The port number on the container. Returned: when present |
|
The port number on the container instance to reserve for your container. Returned: when present |
|
The protocol used for the port mapping. Returned: when present |
|
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). Returned: when present |
|
When this parameter is true, the container is given read-only access to its root file system. Returned: when present |
|
A list of ulimits to set in the container. Returned: when present |
|
The hard limit for the ulimit type. Returned: when present |
|
The type of the ulimit . Returned: when present |
|
The soft limit for the ulimit type. Returned: when present |
|
The user name to use inside the container. Returned: when present |
|
Data volumes to mount from another container. Returned: always |
|
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. Returned: when present |
|
The name of another container within the same task definition to mount volumes from. Returned: when present |
|
The working directory in which to run commands inside the container. Returned: when present |
|
The family of your task definition, used as the definition name Returned: always |
|
Network mode for the containers Returned: always |
|
A list of placement constraint objects to use for tasks Returned: always |
|
A cluster query language expression to apply to the constraint. Returned: when present |
|
The type of constraint. Returned: when present |
|
The container instance attributes required by your task Returned: when present |
|
The name of the attribute. Returned: when present |
|
The ID of the target. Returned: when present |
|
The type of the target with which to attach the attribute. Returned: when present |
|
The value of the attribute. Returned: when present |
|
Revision number that was queried Returned: always |
|
The status of the task definition Returned: always |
|
ARN of the task definition Returned: always |
|
The ARN of the IAM role that containers in this task can assume Returned: when role is set |
|
The list of volumes in a task Returned: always |
|
The contents of the host parameter determine whether your data volume persists on the host container instance and where it is stored. Returned: when present |
|
The name of the volume. Returned: when present |
|
The path on the host container instance that is presented to the container. Returned: when present |