community.aws.rds_option_group module – rds_option_group module
Note
This module is part of the community.aws collection (version 3.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.aws
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.rds_option_group
.
New in community.aws 2.1.0
Synopsis
Manages the creation, modification, deletion of RDS option groups.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.16.0
botocore >= 1.19.0
Parameters
Parameter |
Comments |
---|---|
Indicates whether the changes should be applied immediately, or during the next maintenance window. Choices:
|
|
If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
The location of a CA Bundle to use when validating SSL certificates. Not used by boto 2 based modules. Note: The CA Bundle is read ‘module’ side and may need to be explicitly copied from the controller if not run locally. |
|
A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the ‘user_agent’ key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration. |
|
If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. |
|
Use a botocore.endpoint logger to parse the unique (rather than total) “resource:action” API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used. Choices:
|
|
URL to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. |
|
Specifies the name of the engine that this option group should be associated with. |
|
Specifies the major version of the engine that this option group should be associated with. |
|
The description of the option group. |
|
Specifies the name of the option group to be created. |
|
Options in this list are added to the option group. If already present, the specified configuration is used to update the existing configuration. If none are supplied, any existing options are removed. |
|
A list of |
|
The configuration of options to include in a group. |
|
The option settings to include in an option group. |
|
The allowed values of the option setting. |
|
The DB engine specific parameter type. |
|
The data type of the option setting. |
|
The default value of the option setting. |
|
The description of the option setting. |
|
Indicates if the option setting is part of a collection. Choices:
|
|
A Boolean value that, when Choices:
|
|
The name of the option that has settings that you can set. |
|
The current value of the option setting. |
|
The version for the option. |
|
The optional port for the option. |
|
A list of |
|
Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. |
|
Remove tags not listed in tags. Choices:
|
|
The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region |
|
If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. Aliases aws_session_token and session_token have been added in version 3.2.0. |
|
Specifies whether the option group should be Choices:
|
|
A dictionary of key value pairs to assign the option group. To remove all tags set tags={} and purge_tags=true. |
|
When set to “no”, SSL certificates will not be validated for communication with the AWS APIs. Choices:
|
|
Whether to wait for the cluster to be available or deleted. Choices:
|
Notes
Note
If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence
AWS_URL
orEC2_URL
,AWS_PROFILE
orAWS_DEFAULT_PROFILE
,AWS_ACCESS_KEY_ID
orAWS_ACCESS_KEY
orEC2_ACCESS_KEY
,AWS_SECRET_ACCESS_KEY
orAWS_SECRET_KEY
orEC2_SECRET_KEY
,AWS_SECURITY_TOKEN
orEC2_SECURITY_TOKEN
,AWS_REGION
orEC2_REGION
,AWS_CA_BUNDLE
When no credentials are explicitly provided the AWS SDK (boto3) that Ansible uses will fall back to its configuration files (typically
~/.aws/credentials
). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.Modules based on the original AWS SDK (boto) may read their default configuration from different files. See https://boto.readthedocs.io/en/latest/boto_config_tut.html for more information.
AWS_REGION
orEC2_REGION
can be typically be used to specify the AWS region, when required, but this can also be defined in the configuration files.
Examples
# Create an RDS Mysql Option group
- name: Create an RDS Mysql option group
community.aws.rds_option_group:
state: present
option_group_name: test-mysql-option-group
engine_name: mysql
major_engine_version: 5.6
option_group_description: test mysql option group
apply_immediately: true
options:
- option_name: MEMCACHED
port: 11211
vpc_security_group_memberships:
- "sg-d188c123"
option_settings:
- name: MAX_SIMULTANEOUS_CONNECTIONS
value: "20"
- name: CHUNK_SIZE_GROWTH_FACTOR
value: "1.25"
register: new_rds_mysql_option_group
# Remove currently configured options for an option group by removing options argument
- name: Create an RDS Mysql option group
community.aws.rds_option_group:
state: present
option_group_name: test-mysql-option-group
engine_name: mysql
major_engine_version: 5.6
option_group_description: test mysql option group
apply_immediately: true
register: rds_mysql_option_group
- name: Create an RDS Mysql option group using tags
community.aws.rds_option_group:
state: present
option_group_name: test-mysql-option-group
engine_name: mysql
major_engine_version: 5.6
option_group_description: test mysql option group
apply_immediately: true
tags:
Tag1: tag1
Tag2: tag2
register: rds_mysql_option_group
# Delete an RDS Mysql Option group
- name: Delete an RDS Mysql option group
community.aws.rds_option_group:
state: absent
option_group_name: test-mysql-option-group
register: deleted_rds_mysql_option_group
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Indicates whether this option group can be applied to both VPC and non-VPC instances. Returned: always Sample: |
|
If the Option Group has changed. Returned: always Sample: |
|
Indicates the name of the engine that this option group can be applied to. Returned: always Sample: |
|
Indicates the major engine version associated with this option group. Returned: always Sample: |
|
The Amazon Resource Name (ARN) for the option group. Returned: always Sample: |
|
Provides a description of the option group. Returned: always Sample: |
|
Specifies the name of the option group. Returned: always Sample: |
|
Indicates what options are available in the option group. Returned: always |
|
If the option requires access to a port, then this DB security group allows access to the port. Returned: always |
|
The name of the DB security group. Returned: always Sample: |
|
The status of the DB security group. Returned: always Sample: |
|
The description of the option. Returned: always Sample: |
|
The name of the option. Returned: always Sample: |
|
The name of the option. Returned: always |
|
The allowed values of the option setting. Returned: always Sample: |
|
The DB engine specific parameter type. Returned: always Sample: |
|
The data type of the option setting. Returned: always Sample: |
|
The default value of the option setting. Returned: always Sample: |
|
The description of the option setting. Returned: always Sample: |
|
Indicates if the option setting is part of a collection. Returned: always Sample: |
|
A Boolean value that, when true, indicates the option setting can be modified from the default. Returned: always Sample: |
|
The name of the option that has settings that you can set. Returned: always Sample: |
|
The current value of the option setting. Returned: always Sample: |
|
Indicate if this option is permanent. Returned: always Sample: |
|
Indicate if this option is persistent. Returned: always Sample: |
|
If required, the port configured for this option to use. Returned: always Sample: |
|
If the option requires access to a port, then this VPC security group allows access to the port. Returned: always |
|
The status of the VPC security group. Returned: always Sample: |
|
The name of the VPC security group. Returned: always Sample: |
|
The tags associated the Internet Gateway. Returned: always Sample: |
|
If present, this option group can only be applied to instances that are in the VPC indicated by this field. Returned: always Sample: |