community.general.imc_rest module – Manage Cisco IMC hardware through its REST API

Note

This module is part of the community.general collection (version 5.8.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.general.imc_rest.

Synopsis

Requirements

The below requirements are needed on the host that executes this module.

  • lxml

  • xmljson >= 0.1.8

Parameters

Parameter

Comments

content

string

When used instead of path, sets the content of the API requests directly.

This may be convenient to template simple requests, for anything complex use the ansible.builtin.template module.

You can collate multiple IMC XML fragments and they will be processed sequentially in a single stream, the Cisco IMC output is subsequently merged.

Parameter content is mutual exclusive with parameter path.

hostname

aliases: host, ip

string / required

IP Address or hostname of Cisco IMC, resolvable by Ansible control host.

password

string

The password to use for authentication.

Default: "password"

path

aliases: src, config_file

path

Name of the absolute path of the filename that includes the body of the http request being sent to the Cisco IMC REST API.

Parameter path is mutual exclusive with parameter content.

protocol

string

Connection protocol to use.

Choices:

  • "http"

  • "https" ← (default)

timeout

integer

The socket level timeout in seconds.

This is the time that every single connection (every fragment) can spend. If this timeout is reached, the module will fail with a Connection failure indicating that The read operation timed out.

Default: 60

username

aliases: user

string

Username used to login to the switch.

Default: "admin"

validate_certs

boolean

If false, SSL certificates will not be validated.

This should only set to false used on personally controlled sites using self-signed certificates.

Choices:

  • false

  • true ← (default)

Notes

Note

  • The XML fragments don’t need an authentication cookie, this is injected by the module automatically.

  • The Cisco IMC XML output is being translated to JSON using the Cobra convention.

  • Any configConfMo change requested has a return status of ‘modified’, even if there was no actual change from the previous configuration. As a result, this module will always report a change on subsequent runs. In case this behaviour is fixed in a future update to Cisco IMC, this module will automatically adapt.

  • If you get a Connection failure related to The read operation timed out increase the timeout parameter. Some XML fragments can take longer than the default timeout.

  • More information about the IMC REST API is available from http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/api/3_0/b_Cisco_IMC_api_301.html

Examples

- name: Power down server
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false
    content: |
      <configConfMo><inConfig>
        <computeRackUnit dn="sys/rack-unit-1" adminPower="down"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Configure IMC using multiple XML fragments
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false
    timeout: 120
    content: |
      <!-- Configure Serial-on-LAN -->
      <configConfMo><inConfig>
        <solIf dn="sys/rack-unit-1/sol-if" adminState="enable" speed=="115200" comport="com0"/>
      </inConfig></configConfMo>

      <!-- Configure Console Redirection -->
      <configConfMo><inConfig>
        <biosVfConsoleRedirection dn="sys/rack-unit-1/bios/bios-settings/Console-redirection"
          vpBaudRate="115200"
          vpConsoleRedirection="com-0"
          vpFlowControl="none"
          vpTerminalType="vt100"
          vpPuttyKeyPad="LINUX"
          vpRedirectionAfterPOST="Always Enable"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Enable PXE boot and power-cycle server
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false
    content: |
      <!-- Configure PXE boot -->
      <configConfMo><inConfig>
        <lsbootLan dn="sys/rack-unit-1/boot-policy/lan-read-only" access="read-only" order="1" prot="pxe" type="lan"/>
      </inConfig></configConfMo>

      <!-- Power cycle server -->
      <configConfMo><inConfig>
        <computeRackUnit dn="sys/rack-unit-1" adminPower="cycle-immediate"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Reconfigure IMC to boot from storage
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false
    content: |
      <configConfMo><inConfig>
        <lsbootStorage dn="sys/rack-unit-1/boot-policy/storage-read-write" access="read-write" order="1" type="storage"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Add customer description to server
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false
    content: |
        <configConfMo><inConfig>
          <computeRackUnit dn="sys/rack-unit-1" usrLbl="Customer Lab - POD{{ pod_id }} - {{ inventory_hostname_short }}"/>
        </inConfig></configConfMo>
    delegate_to: localhost

- name: Disable HTTP and increase session timeout to max value 10800 secs
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false
    timeout: 120
    content: |
        <configConfMo><inConfig>
          <commHttp dn="sys/svc-ext/http-svc" adminState="disabled"/>
        </inConfig></configConfMo>

        <configConfMo><inConfig>
          <commHttps dn="sys/svc-ext/https-svc" adminState="enabled" sessionTimeout="10800"/>
        </inConfig></configConfMo>
    delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

aaLogin

dictionary

Cisco IMC XML output for the login, translated to JSON using Cobra convention

Returned: success

Sample: "\"attributes\": {\n    \"cookie\": \"\",\n    \"outCookie\": \"1498902428/9de6dc36-417c-157c-106c-139efe2dc02a\",\n    \"outPriv\": \"admin\",\n    \"outRefreshPeriod\": \"600\",\n    \"outSessionId\": \"114\",\n    \"outVersion\": \"2.0(13e)\",\n    \"response\": \"yes\"\n}\n"

configConfMo

dictionary

Cisco IMC XML output for any configConfMo XML fragments, translated to JSON using Cobra convention

Returned: success

Sample: ""

elapsed

integer

Elapsed time in seconds

Returned: always

Sample: 31

error

dictionary

Cisco IMC XML error output for last request, translated to JSON using Cobra convention

Returned: failed

Sample: "\"attributes\": {\n    \"cookie\": \"\",\n    \"errorCode\": \"ERR-xml-parse-error\",\n    \"errorDescr\": \"XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed. \",\n    \"invocationResult\": \"594\",\n    \"response\": \"yes\"\n}\n"

error_code

string

Cisco IMC error code

Returned: failed

Sample: "ERR-xml-parse-error"

error_text

string

Cisco IMC error message

Returned: failed

Sample: "XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed.\n"

input

string

RAW XML input sent to the Cisco IMC, causing the error

Returned: failed

Sample: "<configConfMo><inConfig><computeRackUnit dn=\"sys/rack-unit-1\" admin_Power=\"down\"/></inConfig></configConfMo>\n"

output

string

RAW XML output received from the Cisco IMC, with error details

Returned: failed

Sample: "<error cookie=\"\"\n  response=\"yes\"\n  errorCode=\"ERR-xml-parse-error\"\n  invocationResult=\"594\"\n  errorDescr=\"XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed.\\n\"/>\n"

response

string

HTTP response message, including content length

Returned: always

Sample: "OK (729 bytes)"

status

dictionary

The HTTP response status code

Returned: always

Sample: 200

Authors

  • Dag Wieers (@dagwieers)