community.network.ce_lldp module – Manages LLDP configuration on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 4.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_lldp.

New in community.network 0.2.0

Synopsis

  • Manages LLDP configuration on HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

bind_name

string

Binding interface name.

fast_count

integer

The number of LLDP messages sent to the neighbor nodes by the specified device.

hold_multiplier

integer

Time multiplier for device information in neighbor devices.

interval

integer

Frequency at which LLDP advertisements are sent (in seconds).

lldpenable

string

Set global LLDP enable state.

Choices:

  • "enabled"

  • "disabled"

management_address

string

The management IP address of LLDP.

mdn_notification_interval

integer

Delay time for sending MDN neighbor information change alarm.

mdnstatus

string

Set global MDN enable state.

Choices:

  • "rxOnly"

  • "disabled"

notification_interval

integer

Suppression time for sending LLDP alarm.

restart_delay

integer

Specifies the delay time of the interface LLDP module from disabled state to re enable.

state

string

Manage the state of the resource.

Choices:

  • "present" ← (default)

  • "absent"

transmit_delay

integer

Delay time for sending LLDP messages.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: "Configure global LLDP enable state"
  community.network.ce_lldp:
    lldpenable: enabled

- name: "Configure global MDN enable state"
  community.network.ce_lldp:
    mdnstatus: rxOnly

- name: "Configure LLDP transmit interval and ensure global LLDP state is already enabled"
  community.network.ce_lldp:
    enable: enable
    interval: 32

- name: "Configure LLDP transmit multiplier hold and ensure global LLDP state is already enabled"
  community.network.ce_lldp:
    enable: enable
    hold_multiplier: 5

- name: "Configure the delay time of the interface LLDP module from disabled state to re enable"
  community.network.ce_lldp:
    enable: enable
    restart_delay: 3

- name: "Reset the delay time for sending LLDP messages"
  community.network.ce_lldp:
    enable: enable
    transmit_delay: 4

- name: "Configure device to send neighbor device information change alarm delay time"
  community.network.ce_lldp:
    lldpenable: enabled
    notification_interval: 6

- name: "Configure the number of LLDP messages sent to the neighbor nodes by the specified device"
  community.network.ce_lldp:
    enable: enable
    fast_count: 5

- name: "Configure the delay time for sending MDN neighbor information change alarm"
  community.network.ce_lldp:
    enable: enable
    mdn_notification_interval: 6
- name: "Configuring the management IP address of LLDP"
  community.network.ce_lldp:
    enable: enable
    management_address: 10.1.0.1

- name: "Configuring LLDP to manage the binding relationship between IP addresses and interfaces"
  community.network.ce_lldp:
    enable: enable
    bind_name: LoopBack2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of global LLDP configuration after module execution.

Returned: always

Sample: {"bind_name": "LoopBack2", "fast_count": "5", "hold_multiplier": "5", "interval": "32", "lldpenable": "enabled", "management_address": "10.1.0.1", "mdn_notification_interval": "6", "mdnstatus": "rxOnly", "notification_interval": "6", "restart_delay": "3", "transmit_delay": "4"}

existing

dictionary

k/v pairs of existing global LLDP configuration.

Returned: always

Sample: {"lldpenable": "disabled", "mdnstatus": "disabled"}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {"bind_name": "LoopBack2", "fast_count": "5", "hold_multiplier": "5", "interval": "32", "lldpenable": "enabled", "management_address": "10.1.0.1", "mdn_notification_interval": "6", "mdnstatus": "rxOnly", "notification_interval": "6", "restart_delay": "3", "state": "present", "transmit_delay": "4"}

updates

list / elements=string

command sent to the device

Returned: always

Sample: ["lldp enable", "lldp mdn enable", "lldp transmit interval 32", "lldp transmit multiplier 5", "lldp restart 3", "lldp transmit delay 4", "lldp trap-interval 6", "lldp fast-count 5", "lldp mdn trap-interval 6", "lldp management-address 10.1.0.1", "lldp management-address bind interface LoopBack 2"]

Authors

  • xuxiaowei0512 (@CloudEngine-Ansible)