community.network.ce_static_route_bfd module – Manages static route configuration on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 4.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_static_route_bfd.

New in community.network 0.2.0

Synopsis

  • Manages the static routes on HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

aftype

string / required

Destination ip address family type of static route.

Choices:

  • "v4"

  • "v6"

bfd_session_name

string

bfd name (range 1-15).

commands

list / elements=string

Incoming command line is used to send sys,undo ip route-static default-bfd,commit.

description

string

Name of the route. Used with the name parameter on the CLI.

destvrf

string

VPN instance of next hop ip address.

detect_multiplier

integer

Configure the BFD multiplier (range 3-50).

function_flag

string / required

Used to distinguish between command line functions.

Choices:

  • "globalBFD"

  • "singleBFD"

  • "dynamicBFD"

  • "staticBFD"

mask

string

Destination ip mask of static route.

min_rx_interval

integer

Set the minimum BFD receive interval (range 50-1000).

min_tx_interval

integer

Set the minimum BFD session sending interval (range 50-1000).

next_hop

string

Next hop address of static route.

nhp_interface

string

Next hop interface full name of static route.

pref

integer

Preference or administrative difference of route (range 1-255).

prefix

string / required

Destination ip address of static route.

state

string

Specify desired state of the resource.

Choices:

  • "present" ← (default)

  • "absent"

tag

integer

Route tag value (numeric).

vrf

string

VPN instance of destination ip address.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

  • If no vrf is supplied, vrf is set to default.

  • If state=absent, the route configuration will be removed, regardless of the non-required parameters.

Examples

#ip route-static bfd interface-type interface-number nexthop-address [ local-address address ]
#[ min-rx-interval min-rx-interval | min-tx-interval min-tx-interval | detect-multiplier multiplier ]
- name: Config an ip route-static bfd 10GE1/0/1 3.3.3.3 min-rx-interval 50 min-tx-interval 50 detect-multiplier 5
  community.network.ce_static_route_bfd:
    function_flag: 'singleBFD'
    nhp_interface: 10GE1/0/1
    next_hop: 3.3.3.3
    min_tx_interval: 50
    min_rx_interval: 50
    detect_multiplier: 5
    aftype: v4
    state: present

#undo ip route-static bfd [ interface-type interface-number | vpn-instance vpn-instance-name ] nexthop-address
- name: Undo ip route-static bfd 10GE1/0/1 3.3.3.4
  community.network.ce_static_route_bfd:
    function_flag: 'singleBFD'
    nhp_interface: 10GE1/0/1
    next_hop: 3.3.3.4
    aftype: v4
    state: absent

#ip route-static default-bfd { min-rx-interval {min-rx-interval} | min-tx-interval {min-tx-interval} | detect-multiplier {multiplier}}
- name: Config an ip route-static default-bfd min-rx-interval 50 min-tx-interval 50 detect-multiplier 6
  community.network.ce_static_route_bfd:
    function_flag: 'globalBFD'
    min_tx_interval: 50
    min_rx_interval: 50
    detect_multiplier: 6
    aftype: v4
    state: present

- name: Undo ip route-static default-bfd
  community.network.ce_static_route_bfd:
    function_flag: 'globalBFD'
    aftype: v4
    state: absent
    commands: 'sys,undo ip route-static default-bfd,commit'

- name: Config an ipv4 static route 2.2.2.0/24 2.2.2.1 preference 1 tag 2 description test for staticBFD
  community.network.ce_static_route_bfd:
    function_flag: 'staticBFD'
    prefix: 2.2.2.2
    mask: 24
    next_hop: 2.2.2.1
    tag: 2
    description: test
    pref: 1
    aftype: v4
    bfd_session_name: btoa
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of switchport after module execution

Returned: always

Sample: {"bfd_session_name": "btoa", "description": "testing", "function_flag": "staticBFD", "mask": "24", "next_hop": "3.3.3.3", "pref": "100", "prefix": "192.168.20.0", "tag": "null"}

existing

dictionary

k/v pairs of existing switchport

Returned: always

Sample: {"bfd_session_name": "btoa", "description": "testing", "function_flag": "", "mask": "24", "next_hop": "", "pref": "101", "prefix": "192.168.20.0", "tag": "null"}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {"bfd_session_name": "btoa", "description": "testing", "function_flag": "staticBFD", "mask": "24", "next_hop": "3.3.3.3", "pref": "100", "prefix": "192.168.20.642", "vrf": "_public_"}

updates

list / elements=string

command list sent to the device

Returned: always

Sample: ["ip route-static 192.168.20.0 255.255.255.0 3.3.3.3 preference 100 description testing"]

Authors

  • xuxiaowei0512 (@CloudEngine-Ansible)