community.network.ce_vxlan_vap module – Manages VXLAN virtual access point on HUAWEI CloudEngine Devices.

Note

This module is part of the community.network collection (version 4.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_vxlan_vap.

Synopsis

  • Manages VXLAN Virtual access point on HUAWEI CloudEngine Devices.

Parameters

Parameter

Comments

bind_vlan_id

string

Specifies the VLAN binding to a BD(Bridge Domain). The value is an integer ranging ranging from 1 to 4094.

bridge_domain_id

string

Specifies a bridge domain ID. The value is an integer ranging from 1 to 16777215.

ce_vid

string

When encapsulation is ‘dot1q’, specifies a VLAN ID in the outer VLAN tag. When encapsulation is ‘qinq’, specifies an outer VLAN ID for double-tagged packets to be received by a Layer 2 sub-interface. The value is an integer ranging from 1 to 4094.

encapsulation

string

Specifies an encapsulation type of packets allowed to pass through a Layer 2 sub-interface.

Choices:

  • "dot1q"

  • "default"

  • "untag"

  • "qinq"

  • "none"

l2_sub_interface

string

Specifies an Sub-Interface full name, i.e. “10GE1/0/41.1”. The value is a string of 1 to 63 case-insensitive characters, spaces supported.

pe_vid

string

When encapsulation is ‘qinq’, specifies an inner VLAN ID for double-tagged packets to be received by a Layer 2 sub-interface. The value is an integer ranging from 1 to 4094.

state

string

Determines whether the config should be present or not on the device.

Choices:

  • "present" ← (default)

  • "absent"

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: Vxlan vap module test
  hosts: ce128
  connection: local
  gather_facts: no

  tasks:

  - name: Create a mapping between a VLAN and a BD
    community.network.ce_vxlan_vap:
      bridge_domain_id: 100
      bind_vlan_id: 99

  - name: Bind a Layer 2 sub-interface to a BD
    community.network.ce_vxlan_vap:
      bridge_domain_id: 100
      l2_sub_interface: 10GE2/0/20.1

  - name: Configure an encapsulation type on a Layer 2 sub-interface
    community.network.ce_vxlan_vap:
      l2_sub_interface: 10GE2/0/20.1
      encapsulation: dot1q

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of configuration after module execution

Returned: verbose mode

Sample: {"bind_intf_list": ["110GE2/0/20.1", "10GE2/0/20.2"], "bind_vlan_list": ["99"], "bridge_domain_id": "100"}

existing

dictionary

k/v pairs of existing configuration

Returned: verbose mode

Sample: {"bind_intf_list": ["10GE2/0/20.1", "10GE2/0/20.2"], "bind_vlan_list": [], "bridge_domain_id": "100"}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: verbose mode

Sample: {"bind_vlan_id": "99", "bridge_domain_id": "100", "state=\"present\"": null}

updates

list / elements=string

commands sent to the device

Returned: always

Sample: ["bridge-domain 100", "l2 binding vlan 99"]

Authors

  • QijunPan (@QijunPan)