community.network.cnos_linkagg module – Manage link aggregation groups on Lenovo CNOS devices
Note
This module is part of the community.network collection (version 4.0.2).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.network.
To use it in a playbook, specify: community.network.cnos_linkagg.
Synopsis
This module provides declarative management of link aggregation groups on Lenovo CNOS network devices.
Parameters
Parameter |
Comments |
|---|---|
List of link aggregation definitions. |
|
Channel-group number for the port-channel Link aggregation group. Range 1-255. |
|
List of members of the link aggregation group. |
|
Mode of the link aggregation group. Choices:
|
|
Purge links not defined in the aggregate parameter. Choices:
|
|
State of the link aggregation group. Choices:
|
Notes
Note
Tested against CNOS 10.8.1
Examples
- name: Create link aggregation group
community.network.cnos_linkagg:
group: 10
state: present
- name: Delete link aggregation group
community.network.cnos_linkagg:
group: 10
state: absent
- name: Set link aggregation group to members
community.network.cnos_linkagg:
group: 200
mode: active
members:
- Ethernet1/33
- Ethernet1/44
- name: Remove link aggregation group from GigabitEthernet0/0
community.network.cnos_linkagg:
group: 200
mode: active
members:
- Ethernet1/33
- name: Create aggregate of linkagg definitions
community.network.cnos_linkagg:
aggregate:
- { group: 3, mode: on, members: [Ethernet1/33] }
- { group: 100, mode: passive, members: [Ethernet1/44] }
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The list of configuration mode commands to send to the device Returned: always, except for the platforms that use Netconf transport to manage the device. Sample: |