community.network.cnos_save module – Save the running configuration as the startup configuration on devices running Lenovo CNOS

Note

This module is part of the community.network collection (version 4.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.cnos_save.

Synopsis

  • This module allows you to copy the running configuration of a switch over its startup configuration. It is recommended to use this module shortly after any major configuration changes so they persist after a switch restart. This module uses SSH to manage network device configuration. The results of the operation will be placed in a directory named ‘results’ that must be created by the user in their local directory to where the playbook is run.

Parameters

Parameter

Comments

deviceType

string / required

This specifies the type of device where the method is executed. The choices NE1072T,NE1032,NE1032T,NE10032,NE2572 are added since Ansible 2.4. The choice NE0152T is added since 2.8

Choices:

  • "g8272_cnos"

  • "g8296_cnos"

  • "g8332_cnos"

  • "NE0152T"

  • "NE1072T"

  • "NE1032"

  • "NE1032T"

  • "NE10032"

  • "NE2572"

enablePassword

string

Configures the password used to enter Global Configuration command mode on the switch. If the switch does not request this password, the parameter is ignored.While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.

host

string / required

This is the variable used to search the hosts file at /etc/ansible/hosts and identify the IP address of the device on which the template is going to be applied. Usually the Ansible keyword {{ inventory_hostname }} is specified in the playbook as an abstraction of the group of network elements that need to be configured.

outputfile

string / required

This specifies the file path where the output of each command execution is saved. Each command that is specified in the merged template file and each response from the device are saved here. Usually the location is the results folder, but you can choose another location based on your write permission.

password

string / required

Configures the password used to authenticate the connection to the remote device. The value of the password parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.

username

string / required

Configures the username used to authenticate the connection to the remote device. The value of the username parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.

Notes

Note

Examples

Tasks : The following are examples of using the module cnos_save. These are
 written in the main.yml file of the tasks directory.
---
- name: Test Save
  community.network.cnos_save:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      outputfile: "./results/test_save_{{ inventory_hostname }}_output.txt"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

msg

string

Success or failure message

Returned: always

Sample: "Switch Running Config is Saved to Startup Config"

Authors

  • Anil Kumar Muraleedharan (@amuraleedhar)