community.network.pn_stp_port module – CLI command to modify stp-port.

Note

This module is part of the community.network collection (version 4.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_stp_port.

Synopsis

  • This module can be used modify Spanning Tree Protocol (STP) parameters on ports.

Parameters

Parameter

Comments

pn_block

boolean

Specify if a STP port blocks BPDUs.

Choices:

  • false

  • true

pn_bpdu_guard

boolean

STP port BPDU guard.

Choices:

  • false

  • true

pn_cliswitch

string

Target switch to run the CLI on.

pn_cost

string

STP port cost from 1 to 200000000.

Default: "2000"

pn_edge

boolean

STP port is an edge port.

Choices:

  • false

  • true

pn_filter

boolean

STP port filters BPDUs.

Choices:

  • false

  • true

pn_port

string

STP port.

pn_priority

string

STP port priority from 0 to 240.

Default: "128"

pn_root_guard

boolean

STP port Root guard.

Choices:

  • false

  • true

state

string / required

State the action to perform. Use update to update stp-port.

Choices:

  • "update"

Examples

- name: Modify stp port
  community.network.pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_filter: True
    pn_priority: '144'

- name: Modify stp port
  community.network.pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_cost: "200"

- name: Modify stp port
  community.network.pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_edge: True
    pn_cost: "200"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

indicates whether the CLI caused changes on the target.

Returned: always

command

string

the CLI command run on the target node.

Returned: always

stderr

list / elements=string

set of error responses from the stp-port command.

Returned: on error

stdout

list / elements=string

set of responses from the stp-port command.

Returned: always

Authors

  • Pluribus Networks (@rajaspachipulusu17)