dellemc.openmanage.ome_device_local_access_configuration module – Configure local access settings on OpenManage Enterprise Modular.

Note

This module is part of the dellemc.openmanage collection (version 5.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.openmanage. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: dellemc.openmanage.ome_device_local_access_configuration.

New in dellemc.openmanage 4.4.0

Synopsis

  • This module allows to configure the local access settings of the power button, quick sync, KVM, LCD, and chassis direct access on OpenManage Enterprise Modular.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 3.8.6

Parameters

Parameter

Comments

ca_path

path

added in dellemc.openmanage 5.0.0

The Privacy Enhanced Mail (PEM) file that contains a CA certificate to be used for the validation.

chassis_power_button

dictionary

The settings for the chassis power button.

disabled_button_lcd_override_pin

integer

The six digit LCD override pin to change the power state of the chassis.

This is required when enable_lcd_override_pin is True.

The module will always report change when disabled_button_lcd_override_pin is True.

enable_chassis_power_button

boolean / required

Enables or disables the chassis power button.

If False, the chassis cannot be turn on or turn off using the power button.

Choices:

  • false

  • true

enable_lcd_override_pin

boolean

Enables or disables the LCD override pin.

This is required when enable_chassis_power_button is False.

Choices:

  • false

  • true

device_id

integer

The ID of the chassis for which the local access configuration to be updated.

If the device ID is not specified, this module updates the local access settings for the hostname.

device_id is mutually exclusive with device_service_tag.

device_service_tag

string

The service tag of the chassis for which the local access settings needs to be updated.

If the device service tag is not specified, this module updates the local access settings for the hostname.

device_service_tag is mutually exclusive with device_id.

enable_chassis_direct_access

boolean

Enables or disables the access to management consoles such as iDRAC and the management module of the device on the chassis.

Choices:

  • false

  • true

enable_kvm_access

boolean

Enables or disables the keyboard, video, and mouse (KVM) interfaces.

Choices:

  • false

  • true

hostname

string / required

OpenManage Enterprise Modular IP address or hostname.

lcd

dictionary

The settings for LCD.

The lcd options are ignored if the LCD hardware is not present in the chassis.

lcd_access

string

Option to configure the quick sync settings using LCD.

VIEW_AND_MODIFY to set access level to view and modify.

VIEW_ONLY to set access level to view.

DISABLED to disable the access.

Choices:

  • "VIEW_AND_MODIFY"

  • "VIEW_ONLY"

  • "DISABLED"

lcd_language

string

The language code in which the text on the LCD must be displayed.

en to set English language.

fr to set French language.

de to set German language.

es to set Spanish language.

ja to set Japanese language.

zh to set Chinese language.

user_defined

string

The text to display on the LCD Home screen. The LCD Home screen is displayed when the system is reset to factory default settings. The user-defined text can have a maximum of 62 characters.

password

string / required

OpenManage Enterprise Modular password.

port

integer

OpenManage Enterprise Modular HTTPS port.

Default: 443

quick_sync

dictionary

The settings for quick sync.

The quick_sync options are ignored if the quick sync hardware is not present.

enable_inactivity_timeout

boolean

Enables or disables the inactivity timeout.

Choices:

  • false

  • true

enable_quick_sync_wifi

boolean

Enables or disables the Wi-Fi communication path to the chassis.

Choices:

  • false

  • true

enable_read_authentication

boolean

Enables or disables the option to log in using your user credentials and to read the inventory in a secure data center.

Choices:

  • false

  • true

quick_sync_access

string

Users with administrator privileges can set the following types of quick_sync_access.

READ_WRITE enables writing configuration using quick sync.

READ_ONLY enables read only access to Wi-Fi and Bluetooth Low Energy(BLE).

DISABLED disables reading or writing configuration through quick sync.

Choices:

  • "READ_WRITE"

  • "READ_ONLY"

  • "DISABLED"

timeout_limit

integer

Inactivity timeout in seconds or minutes.

The range is 120 to 3600 in seconds, or 2 to 60 in minutes.

This option is required when enable_inactivity_timeout is True.

timeout_limit_unit

string

Inactivity timeout limit unit.

SECONDS to set timeout_limit in seconds.

MINUTES to set timeout_limit in minutes.

This option is required when enable_inactivity_timeout is True.

Choices:

  • "SECONDS"

  • "MINUTES"

timeout

integer

added in dellemc.openmanage 5.0.0

The socket level timeout in seconds.

Default: 30

username

string / required

OpenManage Enterprise Modular username.

validate_certs

boolean

added in dellemc.openmanage 5.0.0

If False, the SSL certificates will not be validated.

Configure False only on personally controlled sites where self-signed certificates are used.

Prior to collection version 5.0.0, the validate_certs is False by default.

Choices:

  • false

  • true ← (default)

Notes

Note

  • Run this module from a system that has direct access to OpenManage Enterprise Modular.

  • This module supports check_mode.

  • The module will always report change when enable_chassis_power_button is True.

Examples

---
- name: Configure KVM, direct access and power button settings of the chassis using device ID.
  dellemc.openmanage.ome_device_local_access_configuration:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    device_id: 25011
    enable_kvm_access: true
    enable_chassis_direct_access: false
    chassis_power_button:
      enable_chassis_power_button: false
      enable_lcd_override_pin: true
      disabled_button_lcd_override_pin: 123456

- name: Configure Quick sync and LCD settings of the chassis using device service tag.
  dellemc.openmanage.ome_device_local_access_configuration:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    device_service_tag: GHRT2RL
    quick_sync:
      quick_sync_access: READ_ONLY
      enable_read_authentication: true
      enable_quick_sync_wifi: true
      enable_inactivity_timeout: true
      timeout_limit: 10
      timeout_limit_unit: MINUTES
    lcd:
      lcd_access: VIEW_ONLY
      lcd_language: en
      user_defined: "LCD Text"

- name: Configure all local access settings of the host chassis.
  dellemc.openmanage.ome_device_local_access_configuration:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    enable_kvm_access: true
    enable_chassis_direct_access: false
    chassis_power_button:
      enable_chassis_power_button: false
      enable_lcd_override_pin: true
      disabled_button_lcd_override_pin: 123456
    quick_sync:
      quick_sync_access: READ_WRITE
      enable_read_authentication: true
      enable_quick_sync_wifi: true
      enable_inactivity_timeout: true
      timeout_limit: 120
      timeout_limit_unit: SECONDS
    lcd:
      lcd_access: VIEW_MODIFY
      lcd_language: en
      user_defined: "LCD Text"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

error_info

dictionary

Details of the HTTP Error.

Returned: on HTTP error

Sample: {"error": {"@Message.ExtendedInfo": [{"Message": "Unable to process the request because an error occurred.", "MessageArgs": [], "MessageId": "GEN1234", "RelatedProperties": [], "Resolution": "Retry the operation. If the issue persists, contact your system administrator.", "Severity": "Critical"}], "code": "Base.1.0.GeneralError", "message": "A general error has occurred. See ExtendedInfo for more information."}}

location_details

dictionary

returned when local access settings are updated successfully.

Returned: success

Sample: {"EnableChassisDirect": false, "EnableChassisPowerButton": false, "EnableKvmAccess": true, "EnableLcdOverridePin": false, "LcdAccess": "VIEW_ONLY", "LcdCustomString": "LCD Text", "LcdLanguage": "en", "LcdOverridePin": "", "LcdPinLength": null, "LcdPresence": "Present", "LedPresence": null, "QuickSync": {"EnableInactivityTimeout": true, "EnableQuickSyncWifi": false, "EnableReadAuthentication": false, "QuickSyncAccess": "READ_ONLY", "QuickSyncHardware": "Present", "TimeoutLimit": 7, "TimeoutLimitUnit": "MINUTES"}, "SettingType": "LocalAccessConfiguration"}

msg

string

Overall status of the device local access settings.

Returned: always

Sample: "Successfully updated the local access settings."

Authors

  • Felix Stephen (@felixs88)