dellemc.os9.os9_facts module – Collect facts from remote devices running Dell EMC Networking OS9

Note

This module is part of the dellemc.os9 collection (version 1.0.4).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.os9.

To use it in a playbook, specify: dellemc.os9.os9_facts.

Synopsis

  • Collects a base set of device facts from a remote device that is running OS9. This module prepends all of the base network fact keys with ansible_net_<fact>. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

gather_subset

list / elements=string

When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial M(!) to specify that a specific subset should not be collected.

Default: ["!config"]

provider

dictionary

A dict object containing connection details.

auth_pass

string

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

Choices:

  • false

  • true

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Password to authenticate the SSH session to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Specifies the port to use when building the connection to the remote device.

ssh_keyfile

path

Path to an ssh key used to authenticate the SSH session to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

integer

Specifies idle timeout (in seconds) for the connection. Useful if the console freezes before continuing. For example when saving configurations.

username

string

User to authenticate the SSH session to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Notes

Note

  • This module requires OS9 version 9.10.0.1P13 or above.

  • This module requires an increase of the SSH connection rate limit. Use the following command ip ssh connection-rate-limit 60 to configure the same. This can be also be done with the ERROR while parsing: While parsing M() at index 186: Module name “os9_config” is not a FQCN module.

  • For more information on using Ansible to manage Dell EMC Network devices see https://www.ansible.com/ansible-dell-networking.

Examples

# Collect all facts from the device
- os9_facts:
    gather_subset: all
# Collect only the config and default facts
- os9_facts:
    gather_subset:
      - config
# Do not collect hardware facts
- os9_facts:
    gather_subset:
      - "!hardware"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

ansible_net_all_ipv4_addresses

list / elements=string

All IPv4 addresses configured on the device

Returned: when interfaces is configured

ansible_net_all_ipv6_addresses

list / elements=string

All IPv6 addresses configured on the device

Returned: when interfaces is configured

ansible_net_config

string

The current active config from the device

Returned: when config is configured

ansible_net_filesystems

list / elements=string

All file system names available on the device

Returned: when hardware is configured

ansible_net_gather_subset

list / elements=string

The list of fact subsets collected from the device

Returned: always

ansible_net_hostname

string

The configured hostname of the device

Returned: always

ansible_net_image

string

The image file the device is running

Returned: always

ansible_net_interfaces

dictionary

A hash of all interfaces running on the system

Returned: when interfaces is configured

ansible_net_memfree_mb

integer

The available free memory on the remote device in Mb

Returned: when hardware is configured

ansible_net_memtotal_mb

integer

The total memory on the remote device in Mb

Returned: when hardware is configured

ansible_net_model

string

The model name returned from the device

Returned: always

ansible_net_neighbors

dictionary

The list of LLDP neighbors from the remote device

Returned: when interfaces is configured

ansible_net_serialnum

string

The serial number of the remote device

Returned: always

ansible_net_servicetags

list / elements=string

The servicetags from remote device

Returned: always

ansible_net_version

string

The operating system version running on the remote device

Returned: always

Authors

  • Dhivya P (@dhivyap)