You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

f5networks.f5_modules.bigip_gtm_monitor_http module – Manages F5 BIG-IP GTM HTTP monitors

Note

This module is part of the f5networks.f5_modules collection (version 1.21.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_gtm_monitor_http.

New in f5networks.f5_modules 1.0.0

Synopsis 

Manages F5 BIG-IP GTM (now BIG-IP DNS) HTTP monitors.

Parameters 

Parameter	Comments
ignore_down_response boolean	Specifies the monitor allows more than one probe attempt per interval. When `yes`, specifies the monitor ignores down responses for the duration of the monitor timeout. Once the monitor timeout is reached without the system receiving an up response, the system marks the object down. When `no`, specifies the monitor immediately marks an object down when it receives a down response. When creating a new monitor, if this parameter is not provided, the default value is `no`. Choices: `false` `true`
interval integer	The interval specifying how frequently the monitor instance of this template will run. If this parameter is not provided when creating a new monitor, the default value is 30. This value must be less than the `timeout` value.
ip string	IP address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value is ‘*’. If this value is an IP address, then a `port` number must be specified.
name string / required	Monitor name.
parent string	The parent template of this monitor template. Once this value has been set, it cannot be changed. By default, this value is the `http` parent on the `Common` partition. Default: `"/Common/http"`
partition string	Device partition to manage resources on. Default: `"Common"`
port string	Port address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value is ‘*’. If specifying an IP address, you must use a value between 1 and 65535.
probe_timeout integer	Specifies the number of seconds after which the system times out the probe request to the system. When creating a new monitor, if this parameter is not provided, the default value is `5`.
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing. Choices: `false` ← (default) `true`
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`.
server string / required	The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`. Default: `443`
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: `"rest"` ← (default)
user string / required	The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`. Choices: `false` `true` ← (default)
receive string	The receive string for the monitor call.
reverse boolean	Instructs the system to mark the target resource down when the test is successful. This setting is useful, for example, if the content on your web site home page is dynamic and changes frequently, you may want to set up a reverse ECV service check that looks for the string Error. A match for this string means the web server was down. To use this option, you must specify values for `send` and `receive`. Choices: `false` `true`
send string	The send string for the monitor call. When creating a new monitor, if this parameter is not provided, the default of `GET /\r\n` is used.
state string	When `present`, ensures the monitor exists. When `absent`, ensures the monitor is removed. Choices: `"present"` ← (default) `"absent"`
target_password string	Specifies the password, if the monitored target requires authentication.
target_username string	Specifies the user name, if the monitored target requires authentication.
timeout integer	The number of seconds in which the node or service must respond to the monitor request. If the target responds within the set time period, it is considered up. If the target does not respond within the set time period, it is considered down. You can change this to any number, however, it should be 3 times the interval number of seconds plus 1 second. If this parameter is not provided when creating a new monitor, then default value is 120.
transparent boolean	Specifies whether the monitor operates in transparent mode. A monitor in transparent mode directs traffic through the associated pool members or nodes (usually a router or firewall) to the aliased destination (that is, it probes the `ip`-`port` combination specified in the monitor). If the monitor cannot successfully reach the aliased destination, the pool member or node through which the monitor traffic was sent is marked down. When creating a new monitor, if this parameter is not provided, the default value is no `no`. Choices: `false` `true`
update_password string	`always` updates passwords if the `target_password` is specified. `on_create` only sets the password for newly created monitors. Choices: `"always"` ← (default) `"on_create"`

Notes 

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples 

- name: Create a GTM HTTP monitor
  bigip_gtm_monitor_http:
    name: my_monitor
    ip: 1.1.1.1
    port: 80
    send: my send string
    receive: my receive string
    state: present
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

- name: Remove HTTP Monitor
  bigip_gtm_monitor_http:
    name: my_monitor
    state: absent
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

- name: Add HTTP monitor for all addresses, port 514
  bigip_gtm_monitor_http:
    name: my_monitor
    port: 514
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
ignore_down_response boolean	Whether to ignore the down response or not. Returned: changed Sample: `true`
interval integer	The new interval in which to run the monitor check. Returned: changed Sample: `2`
ip string	The new IP of IP/port definition. Returned: changed Sample: `"10.12.13.14"`
parent string	New parent template of the monitor. Returned: changed Sample: `"http"`
port string	The new port the monitor checks the resource on. Returned: changed Sample: `"8080"`
probe_timeout integer	The new timeout in which the system will timeout the monitor probe. Returned: changed Sample: `10`
receive string	The new receive string for this monitor. Returned: changed Sample: `"tcp string to receive"`
reverse boolean	The new value for whether the monitor operates in reverse mode. Returned: changed Sample: `false`
send string	The new send string for this monitor. Returned: changed Sample: `"tcp string to send"`
timeout integer	The new timeout in which the remote system must respond to the monitor. Returned: changed Sample: `10`
transparent boolean	The new value for whether the monitor operates in transparent mode. Returned: changed Sample: `false`

Authors

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

Collection links

Issue Tracker Homepage Repository (Sources)

f5networks.f5_modules.bigip_gtm_monitor_http module – Manages F5 BIG-IP GTM HTTP monitors

Synopsis

Parameters

Notes

Examples

Return Values